-Trains will now remember the length of stations it visits and sell cars
when being autoreplaced if they became too long
-If it needs to remove cars, then it starts from the front and sells
all it can find until the train is short enough
-This only works for trains, that knows the station length of the route
so a full uninterrupted run is needed
-a train needs 1-2 runs to detect if the shortest station is expanded
-This feature can be turned on and off in the train replace window
and each company can have it's own setting
-NOTE: minor savegame version bump
currently this applies to planes and multiheaded train engines (no more lost airmail)
added GetNextEnginePart() that returns the next vehicle in an engine nomatter what type it is
when more types of multivehicle engines are added, they will have to be added here too or autoreplace will not remove all cargo
running MaybeReplaceVehicle() is now delayed until after the loop in CallVehicleTicks()
This avoids selling the vehicle the loop currently works with (and continues to work with afterwards)
this var works like _new_train_id and the rest of that kind of vars, except it is set each time a vehicle is build, nomatter what type
this is a nice tool to code vehicle independent code, which in turn can reduce code duplication
Right now it's used in ReplaceVehicle() and CmdCloneVehicle()
Simplify this check by testing the rail vehicle info flags instead of passing a global variable around.
Note: This is not exactly the original behaviour, because the Lev4 was always allowed to be built, but i guess that was a glitch.
-This allows a player to clone an excisting vehicle of his own
-[fix]: this uncovered an excisting bug in CmdBuildRailVehicle() where depots could build trains of the wrong track type. This is fixed
-Thanks to Celestar for drawing the sprites and _luca_ for including them in openttd.grf
- Benchmark shows that NTP is now around 10x faster than NPF.
- Made IsTunnelTile macro to determine if a tile is a tunnel.
- Added some useful debugging functions for making tiles red / getting accurate timestamps.
- Remove old depot finding algorithm.
- Disable warning for signed/unsigned comparisons.
- Feature: [pbs] Implement autoplacement of pbs blocks, when a block has an entry and an exit pbs signal, covert the entire block to pbs. Can be turned off in the patch settings.
- Feature: [pbs] Allow showing of reserved status by making the tracks darker, when the pbs debug level is at least 1.
- Codechange: [NPF] Check the railtype along a route against the engine type instead of against the previouse tile. This clears the way for electriefied rails.
- Add: [NPF] [ 1209644 ] A penalty for crossings (peter1138)
* Add: rail.[ch] for rail-related enums and wrapper functions.
* Codechange: Removed dozens of magic numbers with below enums.
* Codechange: Rewrote CheckTrackCombination().
* Add: TILE_SIZE, TILE_PIXELS and TILE_HEIGHT constants.
* Add: enums RailTileType, RailTileSubtype, SignalType to mask against the map arrays.
* Add: enums Track, TrackBits, Trackdir, TrackdirBits for railway track data. (Note that the old RAIL_BIT constants are replaced by TRACK_BIT ones).
* Add: enums Direction and DiagDirection
* Codechange: Moved a bunch of track(dir) related lookup arrays from npf.[ch] to rail.[ch].
* Codechange: move RailType enum from tile.h to rail.h.
* Add: Wrapper functions for masking signal status in the map arrays: SignalAlongTrackdir, SignalAgainstTrackdir and SignalOnTrack.
* Add: Wrapper functions to access rail tiles, using above enums
* Add: Wrapper functions to modify tracks, trackdirs, directions, etc.
* Add: Wrapper functions for all lookup arrays in rail.[ch] (Arrays are still used in parts of the code)
* Codechange: Renamed some variables and arguments to better represent what they contain (railbit -> track, bits -> trackdirbits, etc.).
* Codechange: Don't use FindLandscapeHeight() in CmdRemoveSingleRail(), since it returns way too much info. Use GetTileSlope() instead.
* Codechange: [NPF] Removed some unused globals and code from npf.c.
- Fix: Also recalculate the train cache values for 'wagon chains' (in the depot without an engine), to avoid possible desyncs later.
- Fix: Make CmdMoveRailVehicle update the caches of the correct trains in all cases.
- Fix: [refitting] The refit window now shows the correct refit options for the entire consist. Only if at least one of the vehicles in the train can be refitted to a certain cargo, it is shown in the list.
- Fix: [refitting] When refitting to a cargo which is already carried by some vehicles in the consist, the capacities of those vehicles are taken into account when calculating the new capacity of the train in the refit window.
- CodeChange: renamed CmdTrainGotoDepot() to CmdSendTrainToDepot() to be consistent with other depot commands.
- CodeChange: 'newgame' console command now calls the unabused GenRandomNewGame(). For the server it still creates a new game, a client quits the game and continues in SP.
- CodeChange: in the game-difficulty window, setup the disabled buttons on window creation, not every redraw.
- CodeChange: To correctly accept engine-prototypes, the best-player checking has been moved to its own function, I hope it functions the same as before.
- CodeChange: Added symbolic types of PlayerID, OrderID and EngineID. For engines also added GetEngine() and IsEngineIndex(), similar to the other such functions.
- CodeChange: To correctly build industries, some tables have been moved to build_industry.h. The only way to find out currently if an industry is valid in a climate is by looping all industries and checking if it matches. Also to comply with the patch setting build_rawmaterial_industries, it is assumed that these industries do not accept any cargo of any type. This can and probably should changed in the future to some flag in their struct. Also use _opt_ptr instead of _opt.
- CodeChange: implemented the HQ checking code inspired by MarkR2 in "[ 1190944 ] Many commands not checked for security". Unfortunately it is impossible to prevent only deleting a HQ by a modified client atm.
- CodeChange: For insert order and modify order their parameters are implicitely truncated to 8 bits, instead of the 16 bits said in the comments.
- CodeChange: changed the airport gui airport-type checking. Added function GetValidAirports() that returns bitmasked availibility, is also used for checking.
- CodeChange: to check tree-planting, 2 const arrays have been moved to table/tree_land.h (type and count)
- CodeChange: added IsTownIndex() in following of IsStationIndex(), etc.
- Fix (regression): road tunnels did not work anymore, forgot that their type was 0x200 (documented now)
- Add: [NPF] Reversing inside of depots now has a penalty. It also applies to trains only, other vehicles shouldn't bother reversing.
- Fix: [NPF] When checking whether to reverse a train, the trackdir of the first loc was used instead of the last vehicle as a starting node for pathfindig.
This might have caused some trains not reversing when they should have (or vice versa). Typo introduced when converting to GetVehicleTrackdir() in r2256.
- CodeChange: [NPF] Removed duplicate code by letting NPFRouteTjoStationOrTile() call NPFRouteToStationOrTileTwoWay().
- Add: [NPF] NPFRouteToDepotBreadthFirstTwoWay() to find a depot while also looking backwards.
- Add: It is now possibly to specify a path cost for aystar starting nodes.
GetVehicleTrackdir now tries to get a valid trackdir as much as possibly, by assuming that a vehicle is facing outwards in a depot or road station, for example.
- Codechange: [Multistop] Multistop now also tries to find a slot for road vehicles that are in stations, since the pathfinder now properly handles that.
- Add: GetVehicleTrackdir() helper function.
- Codechange: Moved SortStruct from vehicle_gui.h to ttd.h, so the dependency from vehicle.h on vehicle_gui.h could be removed.
- Codechange: Typedeffed the VehicleTypes struct so it can be used as the type for Vehicle.type instead of "byte".
- Codechange: Removed prototype for VehicleSorter(), which had no implementation anymore and was never called.
This should prevent trains, which are longer than the station, to turn around without stopping under certain circumstances and fix speed limit for trains entering a station, when realistic accerlation is used
-Codechange: rewrote some functions while moving waypoint-stuff
-Add: added support for 64k waypoints
-Fix: made the waypoint struct a bit more logic (no bit-fucking)
The bad sideeffect of this is that now no vehicle will automatically go to a depot anymore just
because it is set to be autoreplaced. We will have to find a better way to solve this problem.
Revisions reverted: 1640, 1707, 1709, 1710, 1712(but not the cheat prevention in this one)
Message for last commit should have been:
- Add: [NPF] Added penalty for curves, straighter paths are now preferred when the length is the same. (HackyKid)
- Add: asserts to find the v->u.rail.track == 0 problem.
- Add: IsValidDepot(), IsValidTown(), IsValidSign(), IsValidVehicle(), IsValidStation()
- Add: GetTileOwner(), IsTileOwner()
- Codechange: Replaced IsShipDepotTile(), IsTrainDepotTile(), IsRoadDepotTile() by IsTileDepotType().
- Codechange: typedeffed the MAP_OWNERS as Owner. Should be used as variable type.
- Codechange: Replaced a few uint by TileIndex.
-Codechange: Added wrappers around depot-access (GetDepot no exists)
-Codechange: Made depot-functions a bit more logic (no longer
GetDepotByTile crashes your game when you request it on a non-depot tile)
-Add: made depots dynamic (yes, 64k depots are possible now)
trains in one game (instead of the 240 which was the current value).
Default max allowed vehicles per type is changed:
Trains: 500 (old 80)
Road: 500 (old 80)
Ships: 200 (old 40)
Aicraft: 300 (old 50)
(Tnx to Celestar and Darkvater for checking the patch)
- Supports trains, road vehicles and ships.
- Uses A* pathfinding (same codebase as the new ai).
- Currently unlimited search depth, so might perform badly on large maps/networks (especially ships).
- Will always find a route if there is one.
- Allows custom penalties for obstacles to be set in openttd.cfg (npf_ values).
- With NPF enabled, ships can have orders that are very far apart. Be careful, this will break (ships get lost) when the old pathfinder is used again.
- Feature: Disabling 90 degree turns for trains and ships.
- Requires NPF to be enabled.
- Ships and trains can no longer make weird 90 degree turns on tile borders.
- Codechange: Removed table/directions.h.
- table/directions.h contained ugly static tables but was included more than once. The tables, along with a few new ones are in npf.[ch] now. Better suggestions for a location?
- Fix: Binary heap in queue.c did not allocate enough space, resulting in a segfault.
- Codechange: Rewritten FindFirstBit2x64, added KillFirstBit2x64.
- Codechange: Introduced constant INVALID_TILE, to replace the usage of 0 as an invalid tile. Also replaces TILE_WRAPPED.
- Codechange: Moved TileAddWrap() to map.[ch]
- Add TileIndexDiffCByDir(), TileIndexDiffCByDir().
- Codechange: Moved IsTrainStationTile() to station.h
- Add: IsRoadStationTile() and GetRoadStationDir().
- Fix: added check for v->type in some commands, which expects v to be a specific type
Checks like this is needed to protect network servers from people, who hack their clients to either cheat or crash the server
NOTE: if I made a mistake here it can make a function unreachable when it should be used. Here is one place to look if something weird happens
- Feature: [autoreplace] trains now tries to find a depot if they needs to be replaced
Now all 4 types of vehicles goes to a depot if they needs to be replaced
This will make things more difficult as narrow curves
and depots impose rather strict speed limits. Feedback welcome
For those who don't like low-speed curves: Switch it off
autoreplacing a dualheaded engine into a singleheaded engine now sells the rear engine
as a sideeffect of this, the price for replacing both engines are now added and displayed once from the depot(instead of two identical numbers written on top of each other, looking like one)
fix: cost for autorenew dualheaded engines were doubled and their value where doubled too
-Codechange: renamed all 'schedule' stuff to 'order(list)'
-Codechange: moved all order-stuff to order_cmd.c / order.h
-Codechange: vehicles that share orders are now linked to eachother
with next_shared/prev_shared in Vehicle
Developers: please use AssignOrder to assign data to an order. If not,
you _WILL_ make the save-routine to assert!
realistic acceleration calculation
-Fix: there was a big bug in setting the UP and DOWN flags making it
easy possible for a overloaded train to go up a mountain. This is no
longer possible. They will hang at a certain height
(in prepare of dynamic arrays):
- DEREF_XXX is changed into GetXXX
- All direct call are directed via GetXXX
- struct Industry has now an index-field
- ENUM'd some stuff
- Replaced home built loops with FOR_ALL_XXX
- Added _stations_size, _vehicles_size, ... which gives the length of the
array (which will be dynamic in the near future)
- Changed lengtof(XXX) to _XXX_size (e.g. _stations_size)
- Removed all endof(XXX) (because mostly it was part of a FOR_ALL_XXX)
- Made the sort-functions of all 4 dynamic
- Made all 4 Initialize functions more of the same
- Some minor tab-fixing and stuff
(tnx to Tron for proof-reading my 100kb patch ;))
Note for all: please do NOT directly call _stations, _vehicles, _towns and
_industries, but use the right wrapper to access them. Thank you.
Ps: please also do not use 'v++', where v is of type Vehicle *.
This feature works much like autorenew, but it will get you a new engine type instead of a new one of the same type. Once
ordered, it will automatically replace the engines while they visits a depot. The GUI for setting this up have been added on the
vehicle overview windows
Note: autorenew is now autoreplace, but to the same engine type
Nice new features, that was added to make this possible
- windows can now have two independant vertical scrollbars
- CMD_SHOW_NO_ERROR have been added as a flag for DoCommandP. It will make it do the action instead of showing the red box with
estimated costs even if shift is pressed
- fixed problem where enginetypes where not initialized when loading a game. It's now done in InitializeGame()
an uint8 till the savegame version is bumped to version 5. Then it works
automaticly as a fully uint16. So _stations[] can not be increased till
after the bump!!
This adds a little button per vehicle class to the station window which opens a list of all vehicles that have this station on their schedule.
As side effect this gets rid of some global variables.
This adds no functionality, but is a stepping stone for future improvement (like 16bit order indices) and is easier to read.
This changes preserves binary compatibility wrt savegames.
- reduce to 2 sizes (*DParam64 for 64bit values, *DParam for the rest)
- use inline functions instead of macros
- add assert()s to check for buffer overruns
This includes 2 fixes
-Fix: [1048596] Monorail and Maglev sounds are swapped (r511)
-Add special case to load the jackhammer sound (r478)
The rest are cleanups und enumeration to make merging possible/easier
