- Change fixed array per player to a single pool. This avoids future problems
with vehicle numbers and decreases savegame size. Engine replacements from
previous savegames will be lost.
- Move engine replacement code from players.c to engine.c.
(thanks to blathijs for rewriting this)
As side effect this is a
-Fix: The default AI tried to change the service intervals of vehicles via the CMD_CHANGE_TRAIN_SERVICE_INT command - regardless of the type of the vehicle - which of course failed for non-trains
This means that any user attempt to remove a rear engine will tell the user to move the front engine instead
This fixes the assert when moving multiheaded engines (introduced in r3144)
Note: to make old savegames use this feature, some engines might be turned around in order to link engines in pairs
-Codechange: train subtype is now a bitmask
This allows fast access to info like if it is a wagon or engine and if it is in front and so on
Note: savegame version bump
-Indentation
-Whitespace
-DeMorgan's Law
-Test with NULL or 0 for non-booleans
-'\0' instead of 0 for chars
-Remove redundantly redundant comments (like DoFoo(); // Do foo)
-Join multiple short lines with a single statement
-Split single lines with multiple statements
-Avoid assignments in if
-Trains will now remember the length of stations it visits and sell cars
when being autoreplaced if they became too long
-If it needs to remove cars, then it starts from the front and sells
all it can find until the train is short enough
-This only works for trains, that knows the station length of the route
so a full uninterrupted run is needed
-a train needs 1-2 runs to detect if the shortest station is expanded
-This feature can be turned on and off in the train replace window
and each company can have it's own setting
-NOTE: minor savegame version bump
This increases the speed greatly when allocating more than one at a time
(planes, artic engines, cloning...) and when adding another block of
vehicles to the vehicle pool (adding 512 vehicles each time)
Now it gives "too many vehicles" error message instead
To make this work, AllocateVehicles() needed to be moved to vehicle.c (from aircraft_cmd.c) and made non-static
this assert could be reached by clicking on the goto depot button to cancel goto depot from the orders and the vehicle
still entered the depot. The flags in that case would not be "normal" anymore. An additional check is added to prevent this
currently this applies to planes and multiheaded train engines (no more lost airmail)
added GetNextEnginePart() that returns the next vehicle in an engine nomatter what type it is
when more types of multivehicle engines are added, they will have to be added here too or autoreplace will not remove all cargo
this would result in the construction of a new vehicle while the old one just continued
added an assert to make sure it's always stopped before trying to sell the old vehicle
running MaybeReplaceVehicle() is now delayed until after the loop in CallVehicleTicks()
This avoids selling the vehicle the loop currently works with (and continues to work with afterwards)
this var works like _new_train_id and the rest of that kind of vars, except it is set each time a vehicle is build, nomatter what type
this is a nice tool to code vehicle independent code, which in turn can reduce code duplication
Right now it's used in ReplaceVehicle() and CmdCloneVehicle()
This makes GetSpriteDimension() superflous, because now it's just a thin wrapper around GetSprite() returning only part of the information, therefore remove it too
-This means that one company can only have one setting for renew and replacing
more clients will not fight due to different settings anymore
-This is a needed step in the line to fix autoreplacing dualheaded locomotives
NOTE: savegame revision bump (peter1138 + me in coop)
-This allows a player to clone an excisting vehicle of his own
-[fix]: this uncovered an excisting bug in CmdBuildRailVehicle() where depots could build trains of the wrong track type. This is fixed
-Thanks to Celestar for drawing the sprites and _luca_ for including them in openttd.grf
- Feature: [pbs] Implement autoplacement of pbs blocks, when a block has an entry and an exit pbs signal, covert the entire block to pbs. Can be turned off in the patch settings.
- Feature: [pbs] Allow showing of reserved status by making the tracks darker, when the pbs debug level is at least 1.
- Codechange: [NPF] Check the railtype along a route against the engine type instead of against the previouse tile. This clears the way for electriefied rails.
- Add: [NPF] [ 1209644 ] A penalty for crossings (peter1138)
* Codechange: Made npf.c use some map array accessing wrappers instead of direct access.
* Codechange/Fix: Named every enum in tile.h. Fixes a nasty bug on MSVC where arrays would be initialised with zeroes (tnx Asterix_)
* Removed magic numbers from tables in tile.c.
* Added some explicit casts in tile.h.
* Add: rail.[ch] for rail-related enums and wrapper functions.
* Codechange: Removed dozens of magic numbers with below enums.
* Codechange: Rewrote CheckTrackCombination().
* Add: TILE_SIZE, TILE_PIXELS and TILE_HEIGHT constants.
* Add: enums RailTileType, RailTileSubtype, SignalType to mask against the map arrays.
* Add: enums Track, TrackBits, Trackdir, TrackdirBits for railway track data. (Note that the old RAIL_BIT constants are replaced by TRACK_BIT ones).
* Add: enums Direction and DiagDirection
* Codechange: Moved a bunch of track(dir) related lookup arrays from npf.[ch] to rail.[ch].
* Codechange: move RailType enum from tile.h to rail.h.
* Add: Wrapper functions for masking signal status in the map arrays: SignalAlongTrackdir, SignalAgainstTrackdir and SignalOnTrack.
* Add: Wrapper functions to access rail tiles, using above enums
* Add: Wrapper functions to modify tracks, trackdirs, directions, etc.
* Add: Wrapper functions for all lookup arrays in rail.[ch] (Arrays are still used in parts of the code)
* Codechange: Renamed some variables and arguments to better represent what they contain (railbit -> track, bits -> trackdirbits, etc.).
* Codechange: Don't use FindLandscapeHeight() in CmdRemoveSingleRail(), since it returns way too much info. Use GetTileSlope() instead.
* Codechange: [NPF] Removed some unused globals and code from npf.c.
- Fix: Also recalculate the train cache values for 'wagon chains' (in the depot without an engine), to avoid possible desyncs later.
- Fix: Make CmdMoveRailVehicle update the caches of the correct trains in all cases.
- CodeChange: remove cmd-misuses CmdStartScenario() and CmdDestroyCompanyHQ()
- Fix (invisible): when parameter checking CmdRestoreOrderIndex() the vehicle did not have its orders yet, so it would fail. So move doing this until AFTER the orders have been added back in RestoreVehicleOrders()
- CodeChange: since only the server will be able to modify difficulty settings, leave the checking of correct values besides, and trust users will join legit servers.
- CodeChange: for renaming signs, only check if GetDParam(); eg _decode_parameters is empty ('\0') or not, instead of the extra check of players, etc. That basically does the same thing. Also dirty sign two times when renaming, once before, once after the action. Because if the name becomes shorter and you update only after, garbage remains on the screen.
- CodeChange: made GetMaskOfTownActions() available to the town-cmd to double-check if the action was available to the player. For this purpose the hardcoded _local_player has been removed from the function and is now passed as a parameter.
- CodeChange: To correctly accept engine-prototypes, the best-player checking has been moved to its own function, I hope it functions the same as before.
- CodeChange: Added symbolic types of PlayerID, OrderID and EngineID. For engines also added GetEngine() and IsEngineIndex(), similar to the other such functions.
- CodeChange: To correctly build industries, some tables have been moved to build_industry.h. The only way to find out currently if an industry is valid in a climate is by looping all industries and checking if it matches. Also to comply with the patch setting build_rawmaterial_industries, it is assumed that these industries do not accept any cargo of any type. This can and probably should changed in the future to some flag in their struct. Also use _opt_ptr instead of _opt.
- CodeChange: implemented the HQ checking code inspired by MarkR2 in "[ 1190944 ] Many commands not checked for security". Unfortunately it is impossible to prevent only deleting a HQ by a modified client atm.
- CodeChange: For insert order and modify order their parameters are implicitely truncated to 8 bits, instead of the 16 bits said in the comments.
GetVehicleTrackdir now tries to get a valid trackdir as much as possibly, by assuming that a vehicle is facing outwards in a depot or road station, for example.
- Codechange: [Multistop] Multistop now also tries to find a slot for road vehicles that are in stations, since the pathfinder now properly handles that.
- Add: GetVehicleTrackdir() helper function.
- Codechange: Moved SortStruct from vehicle_gui.h to ttd.h, so the dependency from vehicle.h on vehicle_gui.h could be removed.
- Codechange: Typedeffed the VehicleTypes struct so it can be used as the type for Vehicle.type instead of "byte".
- Codechange: Removed prototype for VehicleSorter(), which had no implementation anymore and was never called.
It do have one side effect through. Now no engines are added/removed from the train anymore, so it produces "half dualheaded engines"
This will be fixed when autoreplace will get a major overhaul at a later date
GetPrevVehicleInChain; this caused some nasty bugs in depots, like
wagons without engines complain about not being stopped, and stuff like
that. Hopefully this fixes those problems. With a big tnx to BJH for his
perfect demo!
