* Don't run multiple collectSubprocesses tasks in parallel.
UIManager:scheduleIn doesn't return anything, using that as a boolean trap made no sense.
* Make the in-place removal of collected pids use a slightly more common idiom
(table.remove in a reverse iteration of said array).
cores
* Only keep a single core online most of the time.
* Device: Add an enableCPUCores method to allow controlling the amount of
online CPU cores.
* Move the initial core onlining setup to Kobo:init, instead of the startup script.
* Enable two CPU cores while hinting new (e.g., cache miss) pages in PDF land.
* Enable two CPU cores while processing book metadata.
* Drive-by fix to isolate the DocCache pressure check to KoptInterface
and actually apply it when it matters most (e.g., k2pdfopt stuff).
* Fix XML, introduce some better error messages, etc.
See roygbyte/newsdownloader.koplugin for more info
* Fix feed attribute saving snafu; Change menu labels; etc.
Also:
- Change default feed
- Change "remove" label to "delete"
- Hide menu after feed sync
* Add comments to a few functions
* Fix bug associated with arxiv catalog.
See comments in genItemTableFromCatalog. Basically, though, the bug
was related to the checking of the acquisition urls. Arxiv only has
PDFs available to download, and the block wasn't catching these with
its existing logic. By adding another clause to look for PDF link
types, and fixing href values that were missing the PDF suffix, we can
successfully download PDFs from Arxiv.
* Gestures: standardize hold to long-press
* Common settings menu: standardize hold to long-press
* Readerstyletweak: standardize hold to long-press
* Readersearch: standardize hold to long-press
* Cleanup util.secondsFrom*Clock stuff (simpler maths, tail calls, meaningful printf tokens).
* Use util.secondsToClockDuration in ReadTimer instead of reinventing the wheel three different ways.
* Reschedule unexpired timers properly on resume (as best as we can, given the unreliable nature of REALTIME).
* Make clock timers tick on the dot, instead of at the same second as when being set.
* Speaking of clock timers, leave the math to os.date & os.time, don't reinvent the wheel yet again.
Add the possibility to autostart profiles when KOReader is started with filemanager or lastfile.
Discussed in #8020
If more profiles are selected, they are started in alphabetically order.
OPDS catalog can be invoked from reader with gesture.
Then on closing OPDS catalog, KOReader crashes.
Let's jump to the download folder instead.
Closes#7784.
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
It can happen in perfectly sane contexts.
CReDocument: Don't destroy internal engine data when Document just
decreased the refcount (as opposed to actually tore down the document
userdata if it were the last ref).
PdfDocument: Only write edited documents if the Doc instance was torn
down.
PicDocument: Silence some DocumentRegistry related warnings
Make 'em match backward & forward.
Now that we have working overrides and the gesture manager, trying to fit them in a weird superset of the top corner tapzones in a vain attempt to avoid bad interactions doesn't make much sense anymore, and just makes the Gesture Manager UI confusing.
Also make sure the corner zones override the L/R ones for double taps, like it's the case with other gestures.
Fix#7710
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
* FileManager/ReaderUI: Clarify the current instance accessor
Make it clearer that we actually store it in a *module/class* member, not an *instance* member.
Also, warn if there's a close/open mismatch.
* Allow doing away with CacheItem
Now that we have working FFI finalizers on BBs, it's mostly useless overhead.
We only keep it for DocCache, because it's slightly larger, and memory pressure might put us in a do or die situation where waiting for the GC might mean an OOM kill.
* Expose's LRU slot-only mode
And use it for CatalogCache, which doesn't care about storage space
* Make GlyphCache slots only (storage space is insignificant here, it was
always going to be evicted by running out of slots).
* More informative warning when we chop the cache in half
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
* Ensure that going from one to the other tears down the former and
its plugins before instantiating the latter and its plugins.
UIManager: Unify Event sending & broadcasting
* Make the two behave the same way (walk the widget stack from top to
bottom), and properly handle the window stack shrinking shrinking
*and* growing.
Previously, broadcasting happened bottom-to-top and didn't really
handle the list shrinking/growing, while sending only handled the list
shrinking by a single element, and hopefully that element being the one
the event was just sent to.
These two items combined allowed us to optimize suboptimal
refresh behavior with Menu and other Menu classes when
opening/closing a document.
e.g., the "opening document" Notification is now properly regional,
and the "open last doc" option no longer flashes like a crazy person
anymore.
Plugins: Allow optimizing Menu refresh with custom menus, too.
Requires moving Menu's close_callback *after* onMenuSelect, which, eh,
probably makes sense, and is probably harmless in the grand scheme of
things.
Plugins are loaded *once*, but torn-down/instantiated multiple times,
and sometimes in the reverse order.
As such, if we use a public function member as the scheduled task, we're
always pointing to the same function, and going from FM to RD
effectively *un*schedules it.
Instead, use an instance-specific closure, so that each instance
schedules & unschedules don't affect each other.
In the same vein, settings ought to be read at instantiation, not at
loading, otherwise, changing a setting in the FM, then switching to the
reader will not pick up the changes.
Kindles are not flagged canPowerOff, although that's technically not
entirely warranted, but sorta makes sense.
The Plugin already handles that sanely, and will only expose/honor the
suspend timer.
The object was never re-assigned, so closing a smaller menu (e.g.,
Calibre metadata search) made the underlying one (e.g., CoverBrowser's
ListMenu) inherit the smaller dimensions...
Instead of creating the object in the Class constructor, create it in the
instance constructor (i.e., :init).
Similar cleanups in other Menu* related classes.
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* Wireless: Optimize memory usage in StreamMessageQueue (use an array of string ropes, that we only concatenate once). Allowed to relax the throttling, making transfers that much faster.
* Persist: Add a "zstd" codec, that uses the "luajit" codec, but compressed via zstd. Since both of those are very fast, it pretty much trounces everything in terms of speed and size ;).
* Persist: Implemented a "writes_to_file" framework, much like the existing "reads_from_file" one. And use it in the zstd codec to avoid useless temporary string interning.
* Metadata: Switch to the zstd codec.
There have been a couple of these this month, and keeping stuff that should only ever run once piling up in their respective module was getting ugly, especially when it's usually simple stuff (settings, files).
So, move everything to a dedicated module, run by reader.lua on startup, and that will actually only do things once, when necessary.
* CalibreMetadata: Get rid of the now useless NULL-hunt: here, this was basically looking for `rapidjson.null` to replace them with... `rapidjson.null` :?. IIRC, that's a remnant of a quirk of the previous JSON parser (possibly even the previous, *previous* JSON parser ^^).
* CalibreSearch: Update the actually relevant NULL-hunt to make it explicit: replace JSON NULLs with Lua nils, instead of relying on an implementation detail of Lua-RapidJSON, because that detail just changed data type ;).
* UIManager: Make sure tasks scheduled during the final ZMQ callback are honored. e.g., the Calibre "Disconnect" handler. This happened to mostly work purely by chance before the event loop rework.
* Calibre: Restore a proper receiveCallback handler after receiving a book, in order not to break the "Disconnect" handler's state (and, well, get a working Disconnect handler, period ^^).
* Calibre: Unbreak metadata cache when it's initialized by a search (regression since #7159).
* Calibre: Handle UTC <-> local time conversions when checking the cache's timestamp against the Calibre metadata timestamp.
* Bump base (Unbreak CRe on Android, update RapidJSON)
Requires https://github.com/koreader/koreader-base/pull/1344 & https://github.com/koreader/koreader-base/pull/1346 (fix#7485)
Assorted input fixes:
* Actually handle errors in the "there's a callback timer" input polling loop.
* Don't break timerfd when the clock probe was inconclusive.
Not directly related, but noticed because of duplicate onInputEvent handlers:
* HookContainer: Fix deregistration to actually deregister properly. "Regression" extant since its inception in #2933 (!).
* Made sure the three plugins (basically the trio of AutoThingies ;p) that were using HookContainer actually unschedule their task on teardown.
* Change 'Find a file' to 'File search' for consistency
There is 'File search' in the Gesture manager already.
There is 'Fulltext search' in the readermenu.
Some help text added.
Allows to hide keyboard on start to see more text.
Default is to show keyboard.
Some wordings unification.
`Open file` goes down, closer to the history of opened files.
* 'Lua check' button
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* Add a new socketutil module with a few helper functions that allow us to:
* Always use a sane User-Agent (previously, only Wikipedia did so)
* Set timeouts in an almost sane manner. Doing it explicitly prevents an interaction with KOSync that does crazy stuff I don't even want to try to understand.
* Unified said timeouts based on the request's intended usage (except for Wikipedia, which already had meaningful timeout values).
* Stopped using LuaSec directly, LuaSocket defers to LuaSec sanely on its own. Everything now transparently supports HTTPS without code duplication.
* Unify logging with AutoSuspend (e.g., keep ourselves to showing the delay in seconds, not the raw timestamp, as that's way harder to interpret, and the RTC module and/or logger will do that for us when the time comes).
* Speaking of, minor revamp of RTC related logging to make it more human-readable.
* On Kobo, if we hit the unexpected wakeup limit, re-engage AutoSuspend's *suspend* check, so that the device has a chance to poweroff instead of being kept awake.
* Screensaver: Unbreak screensaver_stretch_images
We don't have real ternary operators in Lua, if the second argument evaluates to false, it doesn't work.
Invert the test to avoid this pitfall.
(c.f., http://lua-users.org/wiki/TernaryOperator).
Fix#7402, regression since #7371
* Free a few similar constructs (incidentally, some of 'em also tweaked in #7371 ^^).
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
* OPDS: Don't save an empty username.
That causes LuaSockets to try Basic auth, which is useless (and may or may not be problematic for some servers).
* Attempt to explicitly request non-compressed content.
Some servers may still refuse to obey, though.
They're breaking RFC2616 (a.k.a. HTTP/1.1) by doing so, though, meh.
* Let LuaSocket do its job.
It already handles setting up the Host header, as well as Basic authentication if both username & password are set.
Remember, it's life +70 in US & EU, life +50 is Canada.
(It's actually slightly more complex than that, and some periods of
time/countries may use a far longer term. IANAL).
* Menu/KeyValuePage/ReaderGoTo: Unify the dialogs. (Generally, "Enter page number" as title, and "Go to page" as OK button).
* Allow *tapping* on pagination buttons, too. Added spacers around the text to accommodate for that.
* Disable input handlers when <= 1 pages, while still printing the label in black.
* Always display both the label and the chevrons, even on single page content. (Menu being an exception, because it can handle showing no content at all, in which case we hide the chevrons).
* KVP: Tweak the pagination buttons layout in order to have consistent centering, regardless of whether the return arrow is enabled or not. (Also, match Menu's layout, more or less).
* Menu: Minor layout tweaks to follow the KVP tweaks above. Fixes, among possibly other things, buttons in (non-FM) "List" menus overlapping the final entry (e.g., OPDS), and popout menus with a border being misaligned (e.g., Calibre, Find a file).
* CalendarView: Minor layout tweaks to follow the KVP tweaks. Ensures the pagination buttons are laid out in the same way as everywhere else (they used to be a wee bit higher).
Make "Current statistics" and previsouly opened book
statistics display missing info that the other view
has, mostly:
- Pages read: nb (pct%)
- Current page/Total pages: num/total (pct%)
Tweak building to start from items per page instead of
a fixed item height.
Guess the best font size that fit.
Update separator specification from using a "----" to
the now generic separator=true (this allows not wasting
a slot for each separator in the page and not have
only 12 items and 2 small lines in a 14 items page).
Move classic file browser settings from CoverBrowser plugin
into FileManagerMenu, so they are available when this
plugin is disabled (as they also apply to everything
based on Menu).
* QuickDictLookup, ImageViewer, NumberPicker: Smarter `update` that will re-use most of the widget's layout instead of re-instantiating all the things.
* SpinWidget/DoubleSpinWidget: The NumberPicker change above renders a hack to preserve alpha on these widgets almost unnecessary. Also fixed said hack to also apply to the center, value button.
* Button: Don't re-instantiate the frame in setText/setIcon when unnecessary (e.g., no change at all, or no layout change).
* Button: Add a refresh method that repaints and refreshes a *specific* Button (provided it's been painted once) all on its lonesome.
* ConfigDialog: Free everything that's going to be re-instatiated on update
* A few more post #7118 fixes:
* SkimTo: Always flag the chapter nav buttons as vsync
* Button: Fix the highlight on rounded buttons when vsync is enabled (e.g., it's now entirely visible, instead of showing a weird inverted corner glitch).
* Some more heuristic tweaks in Menu/TouchMenu/Button/IconButton
* ButtonTable: fix the annoying rounding issue I'd noticed in #7054 ;).
* Enable dithering in TextBoxWidget (e.g., in the Wikipedia full view). This involved moving the HW dithering align fixup to base, where it always ought to have been ;).
* Switch a few widgets that were using "partial" on close to "ui", or, more rarely, "flashui". The intent being to limit "partial" purely to the Reader, because it has a latency cost when mixed with other refreshes, which happens often enough in UI ;).
* Minor documentation tweaks around UIManager's `setDirty` to reflect that change.
* ReaderFooter: Force a footer repaint on resume if it is visible (otherwise, just update it).
* ReaderBookmark: In the same vein, don't repaint an invisible footer on bookmark count changes.
* Fix typo in dropbox
Reported by @lescheck
* Rephrase text justification explanation more elegantly
* CoverBrowser: fix up some plurals
* Statistics: remove random use of template function
* Use ngettext for minute/minutes and second/seconds
* Change KB/MB/GB to kB/MB/GB SI units
Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Avoid opening two connections in //, by feeding the current connection
to saveSetting, like we were already doing for loadSettings...
It somehow worked just fine on Kobo/Emu, but blew up in fun and
interesting ways on Kindle, probably because of the Fuse proxy.
It was still pretty dumb nonetheless.
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
* Avoid the Lua string copies when compressing/uncompressing the bb
thumbs
* Delay the statement reset so that the pointer returned by the BLOB
query is actually usable ;).
* Re-use a ZSTD decompression context
* Store date & mtime for successfully extracted documents
c.f., 10477501f9 (r44914917)
* Switch to user_version pragma to handle DB schema versioning
* Update file size/date on *each* extraction attempt.
@poirez-z raised a good point, this ought to be useful to deem a file
re-parseable after an update.
* Remove xutil
Functionality has been moved to ffi/zlib & ffi/zstd
* Preserve settings when migrating the BookInfo DB
* Warn via InfoMessage that the DB was updated
* Only store the series name in series, and move the index in series_index
(Column names chosen to match Calibre's).
* Handle the new series_index column in BookInfo consumers
* This allows us to get rid of the code that stripped empty decimals
from series index in *most* places, since it's now a real Lua
number, and the string formatting library does that magic on its
own.
* stride is now a size_t
On some platforms, that's 64 bits, which means it's no longer
automatically converted to a Lua number to avoid precision loss.
Do that ourselves, because lua-serialize doesn't know how to handle an
uint64_t cdata ;).
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
nextTick was too early ;).
Prevents small hitches when turning the page for the page where this
triggers.
Apply the same trickery to the Stats DB insert, even if that one probably
had a much smaller impact.
2 new widgets:
- QRWidget, that's like an ImageWidget, but with a text property that will be converted to a QR code ;
- QRMessage, that's like an InfoMessage, but shows the message as QR code.
Moreover, it adds the ability to export QR codes to the text editor.
1 new plugin:
- Generate QR codes from clipboard
Changes to text editor plugin:
- Add the ability to export QR codes.
Have ReaderBack be the sole handler of onBack.
Add 4 mutually exclusive options for the Back key,
to avoid ReaderLink and ReaderBack location stacks
from interfering (ReaderBack's stack being always a
superset of ReaderLink's stack).
So, remove "Enable back history", which is replaced
by Back option "Go to previous read page".
Fix a few possible crashes and inconsistencies (when
zoom, scroll or reflow have changed) with ReaderPaging
and ReaderView when restoring previous page/view.
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* Add a few IF (NOT) EXISTS guards to DB schema stuff
* Chunk DB migrations into each specific schema revision
And bump to 20201022 to pickup the changes from #6807
Always VACUUM at the end of a (set of) migration.
Just by tweaking the SQL queries, and adding an index
on page_stat_data(start_time).
Also, in the hourly histogram, show at least a 1px bar
when there was any reading this hour.
This allows for better energy efficiency (no more 50Hz tick poll),
as well as lower input lag / higher precision - touch events are
native linux ones.
In addition, auto off/suspend plugin is used in this mode, as we need
to trigger (timed) sleep / poweroff on our own, since the OS ones
will no longer work whenever koreader has focus.
This is for rooted devices only, and possibly somewhat FW
specific, so enabled only on PB740-2 where it's reasonably tested.
* Update the data collection format & handler to make it much less tortuous
* Update the pagecount & resync the stats on document layout changes
* Update the database schema to allow doing most queries against a SQL view that rescales the collected data to be accurate regardless of document layout (thanks to @marek-g for the SQL magic ;)).
* Add a "reset stats for current book" entry in the list of reset options, one that won't horribly break stats in said book ;).
* Fixed a couple of resource (SQL connection) leaks (in ReaderStatistics:getCurrentBookStats & ReaderStatistics:getCurrentBookStats).
* Flush stats to the DB on periodical metadata saves.
* Minor cosmetic tweaks to the code
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
* KOSync - allow automatic WiFi enabling, when user requested progress update
* Add "Sync every # pages" setting to menu
* Get rid of unused default variable
* Simplify logic
Adaptively pins the auto-standby UI lock. When frequent input
from user is observed, we'll prevent for increasingly longer
periods of time, and revert back to more aggressive standby
with infrequent input (infrequent taps when reading a book).
A BackgroundRunner plugin instance will stop running
(rescheduling a check every 2 seconds) when there is no
(or no more) job to run.
Clients of this service now have to emit an event after
adding a job into PluginShare.backgroundJobs, so an
already loaded but stopped BackgroundRunner can notice
it and start running again.
Also prevent very long directory names from overflowing
over neighbour items.
Also bump base for lua-ljsqlite3 to use sqlite3_close_v2()
and avoid possible crashes.
This reverts commit d90e221a17. Reverts #6489 since it introduced problems for people having [*]Auto sync now and in the furture & Action when wifi off: prompt.
Slow browsing and exiting (ex: closing History) could
be noticed when the memory usage is already high (as the
GC has a lot of memory to visit). Delaying it to after
the new screen is shown limits the feeling of slowness.
there is no need to pass the caller rather just the table where the setting is located. passing the setting alone is not enough as sometimes it is nil and then you do not get a reference to its location
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
add a Dispatcher module that allows for dispatching multiple events at once.
This will allow for profiles & for gestures that do multiple things.
it has 2 methods:
Execute which is given a kv table of settings to change and fires an event for each of them.
addSubMenu adds a menu item to a menu to allow for modifying which events are called
it also has settingsList which is a master table of all allowed setting and their corresponding info
(it is mostly from ReaderGesture and needs a lot of work)
to allow for a new setting all one has to do is add a entry to settingsList with a corresponding event and it will work out of the box.
the profile plugin is right now still a stub, just to test Dispatcher. the plan is to finish it and eventually refactor ReaderGesture to rely on this.
This also needs effort to move many functions out of reader gesture into events where they belong.
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
This number might have been leaking from a previously opened
book, and can be innacurate.
Reset it from the number of highlights stored in settings.
Note that the number of "Notes" shown does not mean much.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Simplify (and avoid edge cases) in other code by having
ReadHistory manage the "lastfile" setting on add, remove,
rename...
Fixed a few other cases of things not updated.
- Show output in a TextViewer with a monospace font.
- Include stderr, so errors are shown
- Use Trapper to allow interrupting command (and to fix
some refresh issues)
Really needed these :resetLayout() (as done in Menu.lua)
when stuff is right aligned (otherwise, first computation
of x-offset, when there was no content, being Screen.width,
would stick, and would draw the content off-screen on the
right - no issue noticed when left-aligned as the offsets
would stay being 0 whether there is content or none).
So that Statistics settings modified while in FileManager
are saved.
Also allows resetting statistics when in FileManager
(where there is no current book id to exclude).
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
Update shellcheck and shfmt to the latest version.
Fixes <https://github.com/koreader/koreader/issues/5152>.
Btw, you can apply shellcheck suggestions with a command like:
```
shellcheck --include=SC2250 -f diff *.sh | git apply
```
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
The edited `netsh` command line had errors:
1- missing v4tov4 (or v6 variant)
2- should have `=` instead of `:`
3- typo in listen(ing)address and listen(ing)port
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Replaces DAUTO_SAVE_PAGING_COUNT in defaults.lua with
a new option available in menu, that allows setting
an interval in minutes instead of a page count.
Update words wrapping tweaks for use_xtext: add zero-width spaces
around dots and underscores to allow more wraps.
Fix overlap of directory name and nbitems for long directory names.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Left align partially filled rows for File browser/chooser, but
have them centered for History and Favorites for a prettier
look when only a few items are displayed.
- fix incorrectly shown awake, sleeping, charging and discharging,
- remove unneeded debug mode and logging to external file,
- prevent showing values like inf, -inf, nan in estimated times
(we now show "n/a"), and values below zero,
- show extra confirm box when we want to reset data,
- show time in format xxhxxm instead of only pure minutes,
- check at initialization that the device was charging when it was
turned off (battery level larger than at the time of exit).
Avoid saving/getting "12.0" (as the lua-ljsqlite3 driver does),
and save/get "12" instead by properly converting it to a string
and back, as the config.value table column is of type TEXT.
- Use a hardcoded default value of 10 files per page.
- Save cover sizetag as "s<nb of items per page>" instead
of "s<item height>" so they are stable (and not re-fetched)
when switching between FileBrowser and History, which have
some small geometry differences.
- When showing History in landscape mode, decrease perpage
from the set value, so items don't look smaller.
- Use a step, larger with big items, when iterating and decreasing
font sizes to make text fit, to speed up the process a bit.
Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
A new setting has been adding allowing to set a comma separated list of
tags to ignore.
Entries with either of these tags will be skipped by the client when
fetching the list of articles to download. Extra articles will be
fetched from the server to make up for the skipped articles, ensuring to
meet the target number of articles.
Currently, all the articles were converted to .epub by default. When
handling an article that linked to a .pdf file, it resulted in an
unreadable file.
This patch skips the conversion for a pdf file, and download it directly
instead.
Adds joplin support, fixes https://github.com/koreader/koreader/issues/5086
Changes
-adds a submenu to evernote menu
- -Joplin
|-Set IP and port
|-Set authorization token
|-Export to Joplin
|-Help
-adds EvernoteExporter:exportBooknotesToJoplin()
-adds JoplinClient.lua
-modifies html_export, txt_export and joplin_export flags to work with each other. (eg if user selects one others deactivated)
