The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
Don't close the popup on the first hold_release, ensuring it won't
immediately close on a *different* key if the finger hasn't moved.
If the finger *did* move, that's a quick swipe, and that's unaffected by
this tweak.
That seems like a rather terrible idea to beign with, and that that may actually have fatal consequences.
Re #7738
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
- TextWidget: avoid crash with small max_width (could happen
when opening menu on a small emulator window)
- TextWidget: avoid crash if re-used after :free()
- ReaderHighlight:clear(): fix possible crash when
scheduled and run after document closed
- DictQuickLookup: minor canSearch() tweak ('selected_text'
is normally available only on multiple words selection,
but is currently available on single word selection thanks
to some unrelated side effect)
We're now more careful about this, so, I suppose weird timings may mean
we might be trying to access a nil here.
Fix#7706
Guard a few other similar constructs
FFI finalizers can fire in unspecified orders, but for MuPDF,
we need to ensure that the context is the *very* last thing that get
destroyed.
As such, we need to make sure we close open documents properly on our
end, first.
This prevents potential crashes while switchign to USBMS inside an open
document handled by MuPDF.
Fix#7428
Searches for a string in the edited text.
Available in the Text editor and other input dialogs with the navigation bar enabled.
Find first searches from the beginning of the text.
Find next searches from the next to cursor position, used for continious search.
By now, the Search input window is closed after the search. You need to press the Find button again for continious search, the search string is kept in the input.
Is it better to keep the dialog open for the comfortable continious search? And close it with the Cancel only?
Case insensitive. Cursor jumps to the beginning of the found string.
Notifications are shown for better results visibility.
Unfortunately, violated our standartization to "search", couldn't invent better short wordings.
We've managed to trip a few of those on dimen fields post-init but
pre-paintTo in a few weird coner-cases, a point at which dimen is often
nil.
ConfigDialog: Deal with that very thing in update()
Fix#7656
A dotted line joining the ToC entry text to the
page number may make it easier to use.
(This replaces the menu item separator from d879062e.)
Also fix baselines aligment, which could be a bit off.
* FileManager/ReaderUI: Clarify the current instance accessor
Make it clearer that we actually store it in a *module/class* member, not an *instance* member.
Also, warn if there's a close/open mismatch.
Use a table & table.concat instead of individual concats.
And then use that same table for every hash-related operation.
(Nothing else uses the configurable hash function, otherwise I'd have
limited the table shenanigans to the function itself).
* Allow doing away with CacheItem
Now that we have working FFI finalizers on BBs, it's mostly useless overhead.
We only keep it for DocCache, because it's slightly larger, and memory pressure might put us in a do or die situation where waiting for the GC might mean an OOM kill.
* Expose's LRU slot-only mode
And use it for CatalogCache, which doesn't care about storage space
* Make GlyphCache slots only (storage space is insignificant here, it was
always going to be evicted by running out of slots).
* More informative warning when we chop the cache in half
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
* Ensure that going from one to the other tears down the former and
its plugins before instantiating the latter and its plugins.
UIManager: Unify Event sending & broadcasting
* Make the two behave the same way (walk the widget stack from top to
bottom), and properly handle the window stack shrinking shrinking
*and* growing.
Previously, broadcasting happened bottom-to-top and didn't really
handle the list shrinking/growing, while sending only handled the list
shrinking by a single element, and hopefully that element being the one
the event was just sent to.
These two items combined allowed us to optimize suboptimal
refresh behavior with Menu and other Menu classes when
opening/closing a document.
e.g., the "opening document" Notification is now properly regional,
and the "open last doc" option no longer flashes like a crazy person
anymore.
Plugins: Allow optimizing Menu refresh with custom menus, too.
Requires moving Menu's close_callback *after* onMenuSelect, which, eh,
probably makes sense, and is probably harmless in the grand scheme of
things.
Includes:
- MathML: a few minor fixes
- (Upstream) lvtext: fix possible index out of range
- Fonts: RegisterExternalFont() should take a documentId
- Fonts: fix: letter-spacing should not be applied on diacritic
- (Upstream) Fonts: more granular synthetic weights
- Fonts: synthesized weights: tweak some comments
- Fonts: keep hinting with synthetic weight
- Fonts: fix synthesized weight inconsitencies
- Fonts: fix getFontFileNameAndFaceIndex()
- Fonts: adds LVFontMan::RegularizeRegisteredFontsWeights()
- Fonts: handle synth_weight tweaks in glyph/glyphinfo slots
- (Upstream) Fonts: fix some compiler warnings
- Fix hyphenation on Armenian and Georgian text
Update the bottom menu widget "Font Weight" to allow more
granular weights than the previous "regular | bold".
Also bump thirdparty/luasec to v1.0.1.
successful authentication.
Fully tearing down Wi-Fi was a bit optimistic, as the AP list can
technically still be up, so the user might want to try again and/or
connect to another AP.
Fix#5912, regression since #4616.
The reasoning behind #4616 doesn't really apply anymore anyway, as the
Wi-Fi prompt now handles this inconsistent state properly.
The whole codepath should be *extremely* rare anyway (and/or require
super-broken network conditions).
* Support cancelling individual moves.
Coopt the cancel button to actually do just that, cancel, instead of close.
* Don't close when hitting the accept button, allowing to chain multiple moves.
Changes are still propagated to the caller on each individual move, though.
* Update the new icons to match our usual stroke width.
* ReaderToc: Tweak padding around items to be a tad more balanced for multi-level ToCs, and perfectly balanced for flat ToCs. (Re #7548)
* ReaderToc: Make the onHold popup's width match said padding. (Re #7548)
* InfoMessage: Allow passing the alignment flag to TextBoxWidget
* ReaderToc: Center text inside the InfoMessage onHold popup
The object was never re-assigned, so closing a smaller menu (e.g.,
Calibre metadata search) made the underlying one (e.g., CoverBrowser's
ListMenu) inherit the smaller dimensions...
Instead of creating the object in the Class constructor, create it in the
instance constructor (i.e., :init).
Similar cleanups in other Menu* related classes.
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* Wireless: Optimize memory usage in StreamMessageQueue (use an array of string ropes, that we only concatenate once). Allowed to relax the throttling, making transfers that much faster.
* Persist: Add a "zstd" codec, that uses the "luajit" codec, but compressed via zstd. Since both of those are very fast, it pretty much trounces everything in terms of speed and size ;).
* Persist: Implemented a "writes_to_file" framework, much like the existing "reads_from_file" one. And use it in the zstd codec to avoid useless temporary string interning.
* Metadata: Switch to the zstd codec.
There have been a couple of these this month, and keeping stuff that should only ever run once piling up in their respective module was getting ugly, especially when it's usually simple stuff (settings, files).
So, move everything to a dedicated module, run by reader.lua on startup, and that will actually only do things once, when necessary.
* TimeVal: Log the results of the COARSE probes in debug logs
* GestureDetector: Print details of failed clock probes in debug logs
* GestureDetector: Skip the BOOTTIME probe when CLOCK_BOOTTIME is unsupported.
* Input: Decode ABS_DISTANCE events in debug logs
* Get rid of duplicated <linux/input.h> constants, use the FFI module everywhere (re #7536)
* Kobo: Get rid of the `touch_alyssum_protocol` quirk. Replace it by setting `main_finger_slot` to `1`, like on the H2O.
* CalibreMetadata: Get rid of the now useless NULL-hunt: here, this was basically looking for `rapidjson.null` to replace them with... `rapidjson.null` :?. IIRC, that's a remnant of a quirk of the previous JSON parser (possibly even the previous, *previous* JSON parser ^^).
* CalibreSearch: Update the actually relevant NULL-hunt to make it explicit: replace JSON NULLs with Lua nils, instead of relying on an implementation detail of Lua-RapidJSON, because that detail just changed data type ;).
* UIManager: Make sure tasks scheduled during the final ZMQ callback are honored. e.g., the Calibre "Disconnect" handler. This happened to mostly work purely by chance before the event loop rework.
* Calibre: Restore a proper receiveCallback handler after receiving a book, in order not to break the "Disconnect" handler's state (and, well, get a working Disconnect handler, period ^^).
* Calibre: Unbreak metadata cache when it's initialized by a search (regression since #7159).
* Calibre: Handle UTC <-> local time conversions when checking the cache's timestamp against the Calibre metadata timestamp.
* Bump base (Unbreak CRe on Android, update RapidJSON)
By which I mean, explicitly initialize default settings, making everything seven hundred billion percent less weird.
Also, split the background option between image and (solo) message, because the defaults for those are different, and trying to twist the one into the other was leading to pure madness.
Requires https://github.com/koreader/koreader-base/pull/1344 & https://github.com/koreader/koreader-base/pull/1346 (fix#7485)
Assorted input fixes:
* Actually handle errors in the "there's a callback timer" input polling loop.
* Don't break timerfd when the clock probe was inconclusive.
Not directly related, but noticed because of duplicate onInputEvent handlers:
* HookContainer: Fix deregistration to actually deregister properly. "Regression" extant since its inception in #2933 (!).
* Made sure the three plugins (basically the trio of AutoThingies ;p) that were using HookContainer actually unschedule their task on teardown.
68a5fcdb moved them a bit to near the top than before,
and it can overlap with CRE rendering progress bar.
Also makes it nicer when multiple notications are stacked.
Generic feature added to TouchMenu: an optional callback
'open_on_menu_item_id_func()' set on an items table can
tell which menu item should be shown when opening a menu.
TouchMenu: allows jumping to first or last page with
long-press on the chevrons.
* Change 'Find a file' to 'File search' for consistency
There is 'File search' in the Gesture manager already.
There is 'Fulltext search' in the readermenu.
Some help text added.
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
Followup to #7306.
As discussed there, the only way to make everybody happy is to make 'em context-aware. At which point, trying to make the fact that it's a *device* rotation and not a *content* one come across in the icon design loses its interest, and would actually only further muddy the issue.
So, these are similar is spirit to the traditional rotation icons in pretty much anything that can rotate text content, with a special inspiration from the Kindle 4 & PocketBook UI.
Fix#7429
* Add a new socketutil module with a few helper functions that allow us to:
* Always use a sane User-Agent (previously, only Wikipedia did so)
* Set timeouts in an almost sane manner. Doing it explicitly prevents an interaction with KOSync that does crazy stuff I don't even want to try to understand.
* Unified said timeouts based on the request's intended usage (except for Wikipedia, which already had meaningful timeout values).
* Stopped using LuaSec directly, LuaSocket defers to LuaSec sanely on its own. Everything now transparently supports HTTPS without code duplication.
* Hold "Wi-Fi connection" to show network connection options.
* Honor backend connections (e.g., if wpa_supplicant found a matching AP in its own config first).
* When user clicks "Wi-Fi connection" in menu, only prompt if state is ambiguous.
* Screensaver: Unbreak screensaver_stretch_images
We don't have real ternary operators in Lua, if the second argument evaluates to false, it doesn't work.
Invert the test to avoid this pitfall.
(c.f., http://lua-users.org/wiki/TernaryOperator).
Fix#7402, regression since #7371
* Free a few similar constructs (incidentally, some of 'em also tweaked in #7371 ^^).
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
* Menu/KeyValuePage/ReaderGoTo: Unify the dialogs. (Generally, "Enter page number" as title, and "Go to page" as OK button).
* Allow *tapping* on pagination buttons, too. Added spacers around the text to accommodate for that.
* Disable input handlers when <= 1 pages, while still printing the label in black.
* Always display both the label and the chevrons, even on single page content. (Menu being an exception, because it can handle showing no content at all, in which case we hide the chevrons).
* KVP: Tweak the pagination buttons layout in order to have consistent centering, regardless of whether the return arrow is enabled or not. (Also, match Menu's layout, more or less).
* Menu: Minor layout tweaks to follow the KVP tweaks above. Fixes, among possibly other things, buttons in (non-FM) "List" menus overlapping the final entry (e.g., OPDS), and popout menus with a border being misaligned (e.g., Calibre, Find a file).
* CalendarView: Minor layout tweaks to follow the KVP tweaks. Ensures the pagination buttons are laid out in the same way as everywhere else (they used to be a wee bit higher).
Includes:
- LVString: Fix a c/p issue in lString8::atoi64
- LVTextFm: Simplify and fix resizeImage logic
- LVXMLParser::ReadText(): fix parsing at buffer boundaries
- TextLang: fix lang_tag first part comparison
- CSS font-family: fix parsing of 'inherit' and '!important'
- CSS: support a few -epub-* and -webkit-* properties
- Text fragment flags: add LTEXT_HAS_EXTRA
- CSS: add support for 'line-break' and 'word-break'
* flash_ui: Yield to the kernel between the HL and the UNHL/CB to let the EPDC do its thing in peace.
* UIManager: Handle nils in task scheduling arguments.
* SkimTo: Use the same, thicker chapter nav icons as ReaderSearch (fix#7326).
* SkimTo: The bookmark toggle button doesn't require a vsync flag.
Tweak building to start from items per page instead of
a fixed item height.
Guess the best font size that fit.
Update separator specification from using a "----" to
the now generic separator=true (this allows not wasting
a slot for each separator in the page and not have
only 12 items and 2 small lines in a 14 items page).
ScrollTextWidget
Despite a similar API between ScrollTextWidget and ScrollHtmlWiget, what
they do internally doesn't quite match.
So, while ScrollHtmlWidget's resetSCroll *does* rewind back to the top,
ScrollTextWidget's doesn't, it just updates the scrollbar itself.
So, do that on our end, *before* the (re-)init, which'll call
_renderText for us.
Fix#7318
Remove the title bar, as it was just taking uneeded
space over the book content.
Add a middle button in the top row to toggle bookmark
for the current page.
Rework the UI building to get more consistent and
aligned buttons and progress bar.
Move SkimToWidget from apps/reader/ to ui/widgets/.
* Simplify flash_ui handling (by handling the unhighlight pre-callback, c.f., #7262 for more details).
* UIManager: Handle translucent window-level widgets (and those wrapped in a translucent MovableContainer) properly in setDirty directly, making sure what's *underneath* them gets repainted to avoid alpha layering glitches. (This was previously handled via localized hacks).
* Update UIManager's documentation, and format it properly for ldoc parsing, making the HTML docs more useful.
* ReaderView: Reinitialize the various page areas when opening a new document, to prevent poisoning from the previous document.
* Event: Handle nils in an event's arguments.
* CheckButton/RadioButton: Switch to simple inversion to handle highlighting
* CheckButton: Make the highlight span the inner frame's width, instead of just the text's width, if possible.
* AlphaContainer: Fix & simplify, given the UIManager alpha handling.
* MovableContainer: When translucent, cache the canvas bb used for composition.
* Avoid spurious refreshes in a few widgets using various dummy *TextWidgets in order to first compute a text height.
* KeyValuePage: Avoid floats in size computations.
It was only not handled when hold_callback. Do that
also when hold_input/hold_input_func.
Also fix the handling of HoldRelease (as the Hold may
change the state of 'enabled', so we can't rely
on it to guess the Hold is being handled by Button).
Menu: prevent long-press on "No choice available",
as there's then no page to navigate to.
* In ReaderPaging, the panning step pre-PanningUpdate can be wildly overshot near page edges, so, use the corrected value instead by recomputing it after the panning has been effectively computed by ReaderView.
This fixes slight inaccuracies, as well as glaring mistakes when going backwards, or when near page edges.
This is in line with how ReaderRolling computes the value, which I only realized later because I'm an idiot.
* Minor cleanups around the handling of the dim_area Geom object in general.
* Fix the "Arrow" page overlap mode to be painted in the right coordinates when going backward. Issue might not have been terribly clear because of the previous issue ;).
* Center the arrow's point, while we're here.
* Don't use AlphaContainer to make it translucent, because AlphaContainer is horribly broken, and has weird quirks and behavior that make no sense to me unless some very specific and unlikely constraints are met, and they definitely aren't here.
This fixes the arrow copying an arrow-sized square of the original page the book was opened on on the top-left corner of *every* page with an arrow. (lol).
* Do real proper alpha-blending via Icon/ImageWidget from the original icon, instead of faking it via addBlitFrom, in order to avoid the dimming *around* the triangle's shape.
Move classic file browser settings from CoverBrowser plugin
into FileManagerMenu, so they are available when this
plugin is disabled (as they also apply to everything
based on Menu).
Namely, the Terminal plug-in and its chain of InputDialog on top of each other (via the "Save" button, which opens a whole new fs InputDialog to set the filename, while keeping the file's fs InputDialog open).
- Menu widget: allow specifying the number of items per
page and the item font size, so we can use other values
than the default File browser ones
- Menu: fix setDirty when a border is used
- ToC: add item per page and font size settings, make
Alternative ToC more visible (was previously
available on long-press on Table of contents)
- Bookmarks: add item per page, font size, size reduction
- Progress bars (Skim widget and footer): allow selecting
ToC depths from which ticks are made.
as it is used for the "Set as default" popup.
This allows having that text accurate on widgets without an
actual name_text (e.g., the font size wheel).
Fix#7231
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
* DictQuickLookup: Preserve alpha when switching dict, and scrolling
inside a dict.
* Start moving the NumberPicker alpha hack to Button itself
This makes handling flash_ui easier and saner, avoiding flickering.
* Handle the transparency hack entirely from within Button
* Murder the now unnecessary NumberPicker update_callback hack
* Tweak comments
* And the Button handling made that redundant, too
* Squish debug print
* More comment tweaks
* Reset transparency on scrolling instead of rpeserving it
* Reset alpha when switching dictionaries
* Simplify the pre/post callbakc transparency state handling
And explain why we need to care.
* Give a named reference to ButtonDialog's MovableContainer, so the Button
alpha hack behaves with it
* Document the "self.movable" convention
* Amend that comment a bit
e.g., we don't care much about MultiConfirmBox'w MpvableContainer, as
any button action will close it.
* And make SkimTo's MovableContainer accessible so that Button can grok
that it's translucent
* Switching between HTML/text dicts (Fix#7209)
* Updating the scrollbar and scroll state properly when switching dicts
* Highlights in SortWidget
* Highlights in the Dictionary Download page
* Minor simplification of the tail end of the update process in ImageViewer
Rework Dual pages code so that the view is considered
a single page number, so it looks more like 2-columns
on a single page.
This solves a few issues like:
- Page number and count are consistent between top
and bottom status bars
- SkimTo -1/+1 doing nothing every other tap
- Statistics being wrong (like "Pages read" never
going over half of the book page count)
* QuickDictLookup, ImageViewer, NumberPicker: Smarter `update` that will re-use most of the widget's layout instead of re-instantiating all the things.
* SpinWidget/DoubleSpinWidget: The NumberPicker change above renders a hack to preserve alpha on these widgets almost unnecessary. Also fixed said hack to also apply to the center, value button.
* Button: Don't re-instantiate the frame in setText/setIcon when unnecessary (e.g., no change at all, or no layout change).
* Button: Add a refresh method that repaints and refreshes a *specific* Button (provided it's been painted once) all on its lonesome.
* ConfigDialog: Free everything that's going to be re-instatiated on update
* A few more post #7118 fixes:
* SkimTo: Always flag the chapter nav buttons as vsync
* Button: Fix the highlight on rounded buttons when vsync is enabled (e.g., it's now entirely visible, instead of showing a weird inverted corner glitch).
* Some more heuristic tweaks in Menu/TouchMenu/Button/IconButton
* ButtonTable: fix the annoying rounding issue I'd noticed in #7054 ;).
* Enable dithering in TextBoxWidget (e.g., in the Wikipedia full view). This involved moving the HW dithering align fixup to base, where it always ought to have been ;).
* Switch a few widgets that were using "partial" on close to "ui", or, more rarely, "flashui". The intent being to limit "partial" purely to the Reader, because it has a latency cost when mixed with other refreshes, which happens often enough in UI ;).
* Minor documentation tweaks around UIManager's `setDirty` to reflect that change.
* ReaderFooter: Force a footer repaint on resume if it is visible (otherwise, just update it).
* ReaderBookmark: In the same vein, don't repaint an invisible footer on bookmark count changes.
* I'd failed to notice that ButtonTable *also* instantiates seven billion Buttons on each update. Unfortunately, that one is way trickier to fix properly, so, work around its behavior in Button. (This fixes multiple issues with stuff using ButtonTable, which is basically anything with a persistent set of buttons. A good and easy test-case is the dictionary popup, e.g., the Highlight button changes text, and the next/prev dic buttons change state. All that, and more, was broken ;p).
* Handle corner-cases related to VirtualKeyboard (e.g., Terminal & Text Editor), which screwed with both TouchMenu & Button heuristics because it's weird.
* Flag a the dictionary switch buttons as vsync
(They trigger a partial repaint of the dictionary content).
* Flag the ReaderSearch buttons as vsync
They very obviously trigger a partial repaint, much like SkimTo ;p.
If we're in range of multiple known WiFi Access Points (including multiple instances of the same SSID), we don't need to keep trying to connect after the first successful connection.
Minimal change would have been replacing the return inside the foreach function with return [a non-nil value].
But foreach is deprecated, and since I was touching the code anyhow, I figured I'd do that tiny update as well.
* Fix typo in dropbox
Reported by @lescheck
* Rephrase text justification explanation more elegantly
* CoverBrowser: fix up some plurals
* Statistics: remove random use of template function
* Use ngettext for minute/minutes and second/seconds
* Change KB/MB/GB to kB/MB/GB SI units
Hide bottom panel when showing a SpinWidget, so we gain
on the bottom the space covered by the SpinWidget to see
more how a change is affecting the book text.
For clarity, rename delay_repaint & refresh_callback
to hide_on_apply & when_applied_callback.
Normalize SpinWidgets: have them both accept a
cancel_callback and a close_callback.
InfoMessage: call dissmiss_callback also on timeout.
Rework eb66856d so that "Sync T/B Margins" is disabled
when set Top and Bottom margins differ (previously,
the bottom one was taking over the top one when
it was enabled).
Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Rework b66d0be3 and 6205f260 by making that simpler
to comprehend:
- If interruption or search result window is shown in
less than 3 secondes: no specific tweak, a tap outside
will dismiss everything instantaneously.
- If done after 3 seconds: show the interruption or result
window, and discard input for a few 100ms.
- UIManager:discardEvents(): increase a bit default delays.
Restore feature removed in c98dfef7: tap on title
to set dict of current result as a preferred dictionary
for this document.
Changes from former implementation:
- trust sdcv for ordering, instead of doing it ourselves
by looking at the results (which didn't always work)
- allow setting multiple preferred dicts
- order of preference is shown with a number as a prefix
to the dictionary name in the title
- taping again allows removing it from preferred dicts,
and taping again allows setting it back as the first
preferred dict
* Don't try to expand a screensaver message without any special tokens
* Don't needlessly nil the background when show_message is true
Honor the actual nil background setting, now that we've got one.
Also, only clear covers_fullscreen with no background *and* no widget.
* Support special tokens outside of ReaderUI. Because the undocumented
"Oops, I'll use the fallback otherwise" was extremely not
user-friendly.
If you're *extremely* unlucky, the scheduled check might run *right*
after a wakeup, before the network interface is up. So, you have a
previously stored packet count, but the new one is nil. Boom.
By having the same DoubleSpinWidget launched when
hitting "..." on any of Top margin or Bottom margin
progress bars.
DoubleSpinWidget: remove blank space when no info_text.
Add UIManager:discardEvents(), to allow dropping events
for a period of time.
Default duration of 600ms on eInk, 300ms otherwise.
Used when showing the dict result window, so that a tap
happening just when it's being shown won't discard it.
Used with Trapper:confirm()/:info(), to avoid taps made
in a previous processing to dismiss (and so, select the
cancel action) a ConfirmBox not yet painted/visible.
Don't cleanup input text as much when entered manually
(or when it's sane) than when coming from book text
selection.
This may allow looking up words like "-suffix", or
do more precise Wikipedia queries.
- Rework widget layout to avoid implicit (and wrong)
sizing, using proper padding/margins and correct
measurements of components.
- Adjust lookup word font size so it's not smaller
than the definition.
- Tweak small window positionning: keep it centered
if possible, only move it to keep the highlighted
word shown when we can.
- Large window: adjust to screen size correctly,
leaving room for footer.
- Always have a "Close" button at bottom right.
Former always displayed button "Follow link" will
be added as a 3rd row in the rare case we select
a word in a link.
- Replace "tap on lookup word to edit and redo the
query" with an icon on the right: tap on it to
edit the queries word, long-press to edit the
current result word. Only close the current dict
window when lookup is launched.
- Remove feature "tap on title to set current dict
as the default dict for this document", as it didn't
really work, and it was bad UX.
- InfoMessage: add an option show_delay.
- MovableContainer: avoid possible crash when
not yet painted.
- ReaderDictionary: use show_delay=0.5 instead of
scheduleIn(0.5n...) (a5b133da) as we need the
InfoWidget to be known to UIManager to catch tap
and allow interrupting lookups properly.
- ReaderDictionary: rework handling of no_refresh_on_close
(6162c287) with proper regions comparisons
* Modernize jit syntax
It's built-in, no need for a require anymore.
* Flag Android should_restrict_JIT again
It's mildly helpful at putting off the inevitable.
(very, very, very, very mildly).
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/281
* Don't paint invisible background-colored rounded corners
Made obvious when testing #7042
* Only enforce a highlight radius on buttons that don't already set a
custom one ;).
(Mostly, square buttons with a 0 radius ^^).
ffi/blitbuffer already handles radius being nil, which suits us just fine
:)
* Implement proper alpha-blending of SVG icons
Also, instead of doing that every time, cache a pre-composited version
that matches the screen's BB type.
This is faster, and also has the advantage of making icon highlights
behave.
Jot down a few notes about corner-cases or future improvements, e.g.,
dimming icons on non-white backgrounds, and nightmode with color icons.
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
* stride is now a size_t
On some platforms, that's 64 bits, which means it's no longer
automatically converted to a Lua number to avoid precision loss.
Do that ourselves, because lua-serialize doesn't know how to handle an
uint64_t cdata ;).
* Make switching *back* to the default DPI via auto actually work
properly.
eg., by actually setting DPI back to defaults, and clearing the override
flag.
* Bump base to pickup https://github.com/koreader/koreader-base/pull/1258
* ReaderFooter:
* Honor the global twelve_hour_clock setting, instead of
duplicating a local one.
(Re #6969)
* os.date is a thin wrapper around strftime, so we might be able to get
away with some not-quite-standard extensions...
These are *definitely* supported on Linux, but are *NOT* the glibc
extension (that'd be e.g., %-I), so, hopefully, they're somewhat
portable...
They are also supported on BSD/macOS.
They are *not* supported by the MS UCRT. That means MinGW-w64, too.
This *appears* to be supported on current Bionic (it might even support
said glibc format altering extensions).
* And of course, Windows is terrible, so, make this terribly ugly to not
break it there...
* Turns out BSD also supports the dash trim format extension, so, leave
the trimming to the libc, and handle the special-casing in a way that
doesn't create stupid locals.
* Random unrelated cleanup ^^.
(https://gitter.im/koreader/koreader?at=5fd24be492aa1c4ef5d11f31)
* Update the testsuite
(Because the default used to be 24h clock).
Changed the default to 24h clock ;p.
* Explain why we don't try to fix it in Lua
Avoid crash with RTL UI after options we moved.
Swap Zoom direction items when RTL UI.
Also don't check show_func when sizing the names
on the bottom menu, to avoid icons moving or
resizing when toggling options.
* ReaderDictionary: Don't refresh when dimissing the lookup info
InfoMessage
Re #6932
* Fix dict_largewindow in Landscape
Have to leave some room for the UI chrome
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
Change the text in the button from a hypen (-) to a
Unicode minus size (−, U+2212). This is the same width
as the + sign.
The NaturalLightWidget and FrontLightWidget controls
already use minus signs in this way.
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
By essentially dropping the whole XHTML block, instead of trying to salvage each and every tag one by one as we did before.
Also, as that's usually the result after broken parsing, handle nil URLs slightly better in the frontend, so that they get caught/reported properly instead of doing nothing and/or crashing half the time.
Add option to hide (skip) non-linear fragments, only working
in 1-page mode. Tweaks mostly to footer, toc and skim code
to make it clear(er) which pages belong to linear or non-linear
fragments.
* Don't attempt to restart Nickel when asking for a reboot/shutdown
Use a magic exit code to ID those cases.
* Limit this to Kobo, to avoid breaking potentially existing assumptions
with other platform's startup scripts
- Lcd devices won't use the SurfaceView, just the good old native content/window (except AndroidTv and ChromeOS)
- All android dialogs will be presented with Material Design on recent devices.
- Added an option to device settings to manage application battery optimization.
- Permissions that require the user to go to a settings page will be presented with a native android dialog.
- bump android-luajit-launcher
- Changes under the hood: koreader/android-luajit-launcher#257
2 new widgets:
- QRWidget, that's like an ImageWidget, but with a text property that will be converted to a QR code ;
- QRMessage, that's like an InfoMessage, but shows the message as QR code.
Moreover, it adds the ability to export QR codes to the text editor.
1 new plugin:
- Generate QR codes from clipboard
Changes to text editor plugin:
- Add the ability to export QR codes.
Have ReaderBack be the sole handler of onBack.
Add 4 mutually exclusive options for the Back key,
to avoid ReaderLink and ReaderBack location stacks
from interfering (ReaderBack's stack being always a
superset of ReaderLink's stack).
So, remove "Enable back history", which is replaced
by Back option "Go to previous read page".
Fix a few possible crashes and inconsistencies (when
zoom, scroll or reflow have changed) with ReaderPaging
and ReaderView when restoring previous page/view.
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* When closing a widget, stop sending setDirty call for widgets lower on
the stack as soon as we hit a full-screen one.
This prevents inflated refresh regions when closing stuff on top of a
stack of multiple covers_fullscreen widgets (i.e., InfoMessages on top
of the Favorites page on top of the FM, for instance).
And, while we're there, also prevent getting infected by dithered
widgets when they're below a non dithered full-screen widget (the exact
same examples works, if the underlying FM page requires dithering).
On pocketbook, update modes are not as clear cut due to overall
chipset and kernel version mess. Inkview solves this by always
using the slowest (and safe) GC16 waveform. We now do that too
by default.
Slow updates suck though, so there's now a menu entry to configure
it for speed (with mild artifacts at best, kernel panic at worst).
This is a generic interface (any eink Screen can announce support).
The driver may interpret the slow/fast range however they want.
This allows for better energy efficiency (no more 50Hz tick poll),
as well as lower input lag / higher precision - touch events are
native linux ones.
In addition, auto off/suspend plugin is used in this mode, as we need
to trigger (timed) sleep / poweroff on our own, since the OS ones
will no longer work whenever koreader has focus.
This is for rooted devices only, and possibly somewhat FW
specific, so enabled only on PB740-2 where it's reasonably tested.
* Update the data collection format & handler to make it much less tortuous
* Update the pagecount & resync the stats on document layout changes
* Update the database schema to allow doing most queries against a SQL view that rescales the collected data to be accurate regardless of document layout (thanks to @marek-g for the SQL magic ;)).
* Add a "reset stats for current book" entry in the list of reset options, one that won't horribly break stats in said book ;).
* Fixed a couple of resource (SQL connection) leaks (in ReaderStatistics:getCurrentBookStats & ReaderStatistics:getCurrentBookStats).
* Flush stats to the DB on periodical metadata saves.
* Minor cosmetic tweaks to the code
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
Previously items weren't actually moved, but swapped with the item
at their new position. That works well if you move an item for one position.
However, if you move an item over several positions, you won't get the
expected behaivor.
And to make it the screensaver image.
Done on two-finger large diagonal tap on multitouch
devices (like regular ScreenShoter) as long-diagonal
swipe is reserved for panning.
Fallback to tap in the bottom left corner on
non-multitouch devices.
As things were, when I activated USBMS, any bookmarks recently added and not yet stored in the sidecar file would be lost after returning to the reader. These changes fix that.
This pull requests aims to provide convenient way to zoom in comics. The idea is when user holds/double taps (not decided yet) on a manga/comic panel, it gets cut out from the rest of the image and zoomed. More details in koreader/koreader-base#1148. Depends on koreader/koreader-base#1159
* Uses bunch of new plumbing in base to configure screen rotations in hardware (koreader normally does this via blit buffer rotations, except for android).
* Some PB specific kludges that used to pollute core/framebuffer_linux are brought into PBs frontend driver.
Includes:
- Update German hyphenation patterns
- (Upstream) Adds ODT (ODF) format support
- TextLang, hyphenation: add Basque, Croatian, Esperanto,
Estonian, Georgian, Latvian, Lithuanian, Macedonian,
Occitan, Welsh; update Bulgarian, Irish, Portuguese,
Slovak, Dutch, Norwegian, Spanish; update hyphen min
for Czech, English, Greek; fix Romanian and Ukrainian
pattern file names
- HyphMan: adds HyphMethod::getLeft/RightHyphenMin()
- epub.css: update HR default style
- fb2.css: keep <date> in main text left-aligned
- getRenderedWidths(): inline-block and table fixes
- CSS: avoid style hash mismatch when serializing content:''
- Tables: re-order row groups when necessary
- XML parsing: don't drop trailing text
- HTML parser: tweak implicit head/body insertion code
- Fix text search failure when blank at start or end
readertypography.lua: some cleanup by removing the first
table listing hyph dicts, and including their filenames
in the second table so we can build the first table
dynamically. Also fetch hyph left/right min limits from
crengine to not have to duplicate them here and keep them
in sync.
css_tweaks.lua: for in-page footnotes, switched from
"-cr-only-if: epub-document" to ": -fb2-document"
("not" FB2 documents), so these tweaks also work with
DocX and ODT footnotes.
Also included in base bump:
- KOPTContext: add comic panel detection function/additional
leptonica declarations
- Forcibly disable docs when building giflib
In the "Set footnote popup font size", allow toggling
between setting a relative (to the document) font size
and setting an absolute font size (that won't change
with the document font size).
Since 8815cbe0 and getSafeFilename() taking additional
parameters, and :gsub() returning multiple values,
filesystem type wasn't really checked and replacements
were not ensured, so saving articles like "Portal:Stuff"
failed on VFAT devices as ':' wasn't replaced.
After the awesome work made by @ezdiy:
- Remove empty dir from release zip
- Remove misc files (txt, md, html, gif) to prevent displaying them in PB library
- Do not asociate executable files (sh and py for the moment), just openable files
- Rename the font sample from html to template (to prevent wiping it during clean)
* Only ask to start an USBMS session when plugged into a USB host on Kobo
Also, fix a typo that broke plugout detection on cervantes
* Bump base (necessary input/KoboUSBMS changes)
https://github.com/koreader/koreader-base/pull/1183
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
Adaptively pins the auto-standby UI lock. When frequent input
from user is observed, we'll prevent for increasingly longer
periods of time, and revert back to more aggressive standby
with infrequent input (infrequent taps when reading a book).
A BackgroundRunner plugin instance will stop running
(rescheduling a check every 2 seconds) when there is no
(or no more) job to run.
Clients of this service now have to emit an event after
adding a job into PluginShare.backgroundJobs, so an
already loaded but stopped BackgroundRunner can notice
it and start running again.
* Be even more defensive around KoboUSBMS handling in the startup script
And add some more logging. To the log before a session, to the syslog
after, because we can't be sure onboard is viable.
* Display a short version string straight in the Version label
* Move system statistics inside the Help menu
* Move Version inside Help
* Bump base
https://github.com/koreader/koreader-base/pull/1173
* Enable i18n in KoboUSBMS
* Rejig the "No confirmation" USBMS setting:
In now *only* affects the USB plug in event.
The menu entry will never show the popup (clicking on it should already
be confirmation enough, that, yes, we really would like to do that,
please ;)).
Also, enable said plug in behavior on Cervantes, too ;).
* Add an option to disable USBMS entirely
* Bump base
https://github.com/koreader/koreader-base/pull/1170
* Add an option to *always* flash on chapter boundaries
* Optionally, in flash on chapter boundaries mode, also flash on the *second* page of a chapter.
(There's often a large river at the top of the page on a chapter's first page)
* In CRe, request a flashing update when there is significant image content on the page.
* Register all refresh rate related options in Dispatcher, making them available in Gestures & Profiles.
Includes:
- (Upstream) LVBase64NodeStream: fix possible segfault
- (Upstream) Fix getting encoding from HTML META tags
- FB2: also look for cover in <src-title-info>
- FB2: fix cover image colors
- FB2: don't draw cover in scroll mode
- TextLang: better linebreaks at em-dash (EN/ES/FR)
- TextLang: increase _lb_props static array size
FB2 footnotes style tweaks: avoid gap above first footnote,
caused by the title bottom margin collapsing into it.
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
Witnessed with "L/R Margins": tapping on a button
sets the value to the preset table, by reference.
Tapping the -/+ fine tuning buttons was updating
these tables in-place, in effect modifying the presets.
Avoid conflicts having "In-page EPUB footnotes (smaller)"
affects FB2 documents that use "<a type=note>12</a>" which
would then get smaller if both tweaks are enabled (which
they are, by default).
Also switch "-cr-hint: strut-confined" from being set on "*"
to being set only on "body", now that it is inherited.
Footnote popups: add styles for some non-HTML FB2 tags,
so MuPDF can render them as expected.
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
* Mangle stupid defaults test so that it compares tables, and not a non-deterministic string representation of one.
It's still extremely dumb and annoying to update. (i.e., feel free to kill it with fire in a subsequent PR, I think everybody would cheer).
* Rewrite DepGraph to be deterministic
i.e., fully array based, no more hashes, which means no more pairs randomly re-ordering stuff.
Insertion order is now preserved.
Pretty sure a couple of bugs have been fixed and/or added along the way
;p.
* Resync frontend/apps/filemanager/lib/md.lua w/ upstream
And use orderedPairs in the attribute parsing code, just to make that stupid test happy.
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
* landscape FM / Refactor rotation
refactor and simplify the orientation handling code. the user generally cares about the rotation (what direction the device is facing) and not about if koreader is displaying in portrait or landscape mode
* bump base
update luasocket, libjpeg-turbo, curl
add logging to evernote-sdk-lua
update framebuffer for proper rotation
add a Dispatcher module that allows for dispatching multiple events at once.
This will allow for profiles & for gestures that do multiple things.
it has 2 methods:
Execute which is given a kv table of settings to change and fires an event for each of them.
addSubMenu adds a menu item to a menu to allow for modifying which events are called
it also has settingsList which is a master table of all allowed setting and their corresponding info
(it is mostly from ReaderGesture and needs a lot of work)
to allow for a new setting all one has to do is add a entry to settingsList with a corresponding event and it will work out of the box.
the profile plugin is right now still a stub, just to test Dispatcher. the plan is to finish it and eventually refactor ReaderGesture to rely on this.
This also needs effort to move many functions out of reader gesture into events where they belong.
Err, kind of nitpick PR. Is just add some "permanent" menus other than plugins to the new "more_tools" submenu. So it will never be empty.
Follow-up: #6279
Supersedes: #5512#6092Fixes: #5461
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
* generic Device:info() function which returns the model
* add Device:canSuspend() and make it true in all devices that have suspend routines and the emulator
* also enable fake poweroff/reboot on the emulator
* add Device.home_dir
* add Device:hasExitOptions() and update menus & comments
More tools is a submenu in the tools menu, not in the plugins menu. That everything in there happens to be plugins is merely a technical detail and not considered part of the unifying menu vision. Plugin management should be last as it is because it's only used once in a blue moon, if it should be in the tools menu at all. The same applies to settings more broadly. Putting plugin management in the tools menu is traditional, however.
Plugins should not and are not supposed to be most at home in the tools menu. Those plugins that happen to be in the tools menu are by and large there because that's where they fit best. Those that don't are new and I didn't have the heart or energy to make much of a fuzz about it provided they had a reasonable claim to the tools menu. That includes plugins like tweak document settings which should be more at home in settings → document.
Also see <https://github.com/koreader/koreader/issues/6105#issuecomment-621653800>.
Requires koreader/android-luajit-launcher#233
Requires koreader/koreader-base#1117
It is a workaround for #6263 but can be useful on some devices with erratic back key behaviour too (yep, Onyx)
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
dofile() wasn't enough to copy en_keyboard, as the references
to key popups would still be shared, and hacks to them (as
done by the FR keyboard) would be active on the EN keyboard.
Also, for the FR Keyboard:
- bring M key popup too when moving it to 2nd row.
- keep original ',' and '.' as on EN keyboard.
- add ';' instead of ',' as the added key, and let it have
some key popup too, with keys helpful when CSS editing.
Allows editing a CSS snippet to be applied to this
book only, without the need to create and edit
a User style tweak.
Allows copying any other tweak CSS by just taping
on it (and pasting into this with Hold).
Limit User style tweaks nb of items per menu page
to 6 (like we try to do for other tweaks menus).
Includes:
- GIF decoding: avoid crash on some images
- Top progress bar: avoid re-computing when not needed
- Top progress bar: allow external filling of marks
- CSS/Text: properly inherit and handle text-align-last
- getRenderedWidths(): fix handling of text-indent
- Reorder some flags to make the sets clearer
- CSS: support more white-space named values
- Text: fix standalone BR not making an empty line (rework)
- CSS: support for pseudo elements ::before & ::after
- CSS: content: open-quote support via TextLangMan
- CSS/Text selection: adds a few "-cr-hint:" tweaks
cre.cpp: adds setHeaderProgressMarks()
Added 2 style tweaks to disable pseudo elements
::before/after and common ligatures.
This is a quick exploration into how the new Device:hasFewKeys() method could work to make things more usable on very limited devices.
In the reader, the right is repurposed to open the menu. Left in turn closes it.
The same principle is applied to ButtonDialog. This means you can select anything in principle, but once you go right you can't go back.
References <https://github.com/koreader/koreader/issues/4029>.
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
Using DoubleSpinWidget.
Also keep SpinWidgets open on Apply.
Added little trick: if widget has been moved, close
bottom config menu on next Apply to show more of
the book.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Make them external links so they don't trigger a "link is
invalid" popup and we can use swipe left/right to navigate
pages (and jump to latest bookmark/go back for comparing).
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
Bump crengine:
- Text: fix occasional BiDi bad word splitting
- Font: fix HB fallback measurement/drawing mismatches
- Font: do not add letter spacing on diacritics
- Text: tunable use of letter spacing for justification
- Text: dont adjust space after initial quotation mark/dash (rework)
- Text: fix possible bad widths after collapsed spaces
xtext.cpp: pick crengine fix with HB fallback
measurement/drawing mismatches
Adds "Word Expansion" to bottom Font size menu, and moved
"Word Spacing" there too, to balance the panels' heights
to 4 items.
Also add "Dictionary" and "Fulltext search" to available
and cycleable highlight actions.
Generalize long-press (3s) at end of selection to show
the highlight dialog popup.
Replace Hyphenation menu with Typography menu.
This works mostly like before:
- typography/hyphenation is chosen according to the book
metadata language,
- one can set a default or a fallback language,
- hyphenation is now just a subset of typography, and
can be disabled while still setting a language and
enabling the other features,
- the typography language enables newly added features
to crengine: per-language line breaking rules and
per-language Harfbuzz glyph selection.
bump crengine: support for EPUB3 nav toc and page maps
Includes:
- Fix lvRect:isRectInside(rc) with 0-width or 0-height rect
- TOC: parse EPUB3 nav toc, fallback to spine when no toc
- Parse and cache various hardcopy page list maps
- epub.css: hide EPUB3 <span epub:type="pagebreak"> content
cre.cpp: add a few PageMap helper functions.
Adds ReaderPageMap which will add a new menu (under TOC and
Bookmarks) that will allow:
- to list source page numbers (like a TOC)
- to show visible page labels in the right margin
- to use these source page numbers in the footer, the TOC,
the GoTo and SkimTo widgets, and to use the source page
number in the standard bookmark and highlight initial text.
- Add some style tweaks to allow displaying FB2 end notes
in-page too - and to allow showing them without a smaller
font size.
- Show footnote number in bold in popup footnotes.
Set these 2 tweaks as default global tweaks for new users
(and existing users that have not set any global defaults).
One can disable them by long-press on each of them.
Only per-specs EPUB and FB2 footnotes (other in-page footnotes
tweaks may trigger on non-footnote content on some books, so
let enabling them be a user decision).
- FB2 footnotes are no more rendered in-page by default
- In-page rendering can be enable by the added Style tweak
- FB2 footnotes can also show in footnote popup (with
some added not-so-nice CSS so MuPDF can render them
as crengine)
Just like what's been done previously for InfoMessage.
Also tweak 'other_buttons' option (not yet used anywhere)
to allow multiple rows of such other buttons.
Adds a screensaver mode which is just a line of text at the top of the screen. Purpose is to be minimally obstructive while still displaying something to indicate the device is asleep.
Don't display a tofu glyph when meeting a tab (none of
our fonts have a glyph for it).
New parameter: TextBoxWidget.tabstop_nb_space_width,
that defaults to 8, to ensure tabstops in the usual
left aligmnent (or right when para is RTL).
* Make sure the Color menu is accessible on GrayScale device, in the event
one would have inherited a color-enabled settings from another
device...
* Warn on startup if color rendering is enabled on a grayscale device.
A non-exhaustive lists of things such a setup would break:
* same-to-same blitbuffers for pretty much every rendering engine
* same-to-same blitting codepaths and fast-paths
* software dithering in CRe
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
Try to limit the nb of items per menu page to 5 or 6 by
splitting related ones into sub-menus, so we get more
room below to see how they affect the content.
Adds "No indentation on first/following paragraphs" and
"Paragraphs margins and paddings", and Links underlining.
The default left margin on blockquote and dd is `40px`, but unfortunately that doesn't scale. rem is calculated using a hardcoded16px, so em or % is the best compromise in this case.
PS If we assume 1em = 16px then 40px is actually 2.5em, not 1em. This reduction in indentation is mainly intended for the benefit of smaller E Ink devices.
Closes <https://github.com/koreader/koreader/issues/5859>.
* Unbreak OTA on crappy shells
Very, very old ash versions abort on set -o failures (as mandated by
POSIX, granted). This makes it impossible to reliably catch failures in
a single step.
So do it from the Lua side instead.
Should fix#5844
* Launch the zsync wrapper through bash on Cervantes
Previous cleanup resurrected multiple class names, so
we know now the original alignment of a float.
Use them in 'web' mode, as it allows floats to be nearer
the section they are refering to, and it may limit
floats truncation in page splitting.
But keep floats aligned on a single side in 'book' mode,
as it might allow easier reading.
* Also remove the temporary files when doing a full retry
* Bump base
Pickup the required zsync2/FBInk updates
(https://github.com/koreader/koreader-base/pull/1038)
* Actually does what it says on the tin for Abort
i.e., cleanup temporary files
Touchscreen is mirrored in X & Y and has a different resolution from the eink panel.
Uses systemd for time/date/suspend/poweroff/reboot
Two systemd units for platform integration. button-listen is a very
simple launcher.
to-do: add support for wifi by implementing a wpa supplicant dbus client.
Authored-by: Thomas Spurden <tcrs@users.noreply.github.com>
OPDS catalogs may have search query capabilities. It is very usefull to find a
book in huge catalog, even when they are organized as directories. This commit
provides the possibility to add a %s mark in an OPS catalog URL, that would
trigger a search box when browsing the OPDS in koreader.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
It's extremely confusing, as it has nothing to do with calibre catalogs,
which are actual things the user can generate manually.
What it's using instead is actually a metadata cache in a flatfile db
that's always present, as long as "Send To Device" was used to upload
the content to the device.
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
MuPDF does not handle "text-align: justify" correctly on
RTL text: the last line is left-aligned, but it should be
right-aligned.
Not using justify makes it correctly right align the whole
text.
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Ellipsis was sometimes not displayed when text is right aligned,
because width was not updated with ellipsis size.
bump base/xtext: fix truncation ellipsis position in bidi text
so it stays nearer to previous logical order char, instead of
sometimes being thrown away to start or end of line.
Replaces DAUTO_SAVE_PAGING_COUNT in defaults.lua with
a new option available in menu, that allows setting
an interval in minutes instead of a page count.
The Japanese keyboard still needs to be cleaned out a bit more at some point, but the important thing is that this commit fixes#5632 by restoring the kanji layer with the voiced-unvoiced conversion symbol.
- Alias everything to Bidi.nowrap() when in LTR UI, as using
LTR isolates seems uneeded when already LTR.
- Better wrapping of RTL filename by using auto direction and
LTR-isolating only the suffix so it's always on a side.
- menu.lua: handle bidi_wrap_func outside getMenuText(), which
may be used in other contexts.
- Add BD.filepath() and BD.dirpath()
- bump crengine: (Upstream) DocX: fix paragraphs with single hyperlink
- bump fribidi to 1.0.8 (for nested isolates fix)
- xtext.makeLine(): return no_allowed_break_met=true when that
happens, so we know the line breaks inside a word.
TextBoxWidget: add forgotten property (when use_xtext=true) when no
line break opportunity was found: has_split_inside_word=true.
(Only used by CoverBrowser Mosaic mode to make nicer text covers
by reducing font size when that happens.)
A few fixes and enhancement related to bold text:
- When using bold=true with a regular font, use its bold
variant if one exists (can be prevented by manually
adding a setting: "use_bold_font_for_bold" = false).
- When using a bold font without bold=true, promote bold
to true, so fallback fonts are drawn bold too.
- Whether using a bold font, or using bold=true, ensure
fallback fonts are drawn bold, with their available bold
variant if one exists, or with synthetized bold.
- When using a bold variant of a fallback font, keep using
the regular variant as another fallback (as bold fonts
may contain less glyphs than their regular counterpart).
- Allow providing bold=Font.FORCE_SYNTHETIZED_BOLD to
get synth bold even when a bold font exists (might be
interesting to get text in bold the same width as the
same text non-bold).
- Use the font realname in the key when caching glyphs,
instead of our aliases (cfont, infont...) to avoid
duplication and wasting memory.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Set default language (for Harfbuzz to pick up localized glyphs
in a font), default text direction, and UI element mirroring
depending on the UI language.
Use some HorizontalSpan for padding between key and value,
instead of prepending a space to the value text (which
won't work as expected if value text is RTL, as it would
be put on the right side of screen).
Changes in this commit:
- Fix arrays to large (10 elements instead of 8) copied from the old keyboard system. Issue introduced in #5610
- Add ё popup.
- Change shift key as per #5659 (for both ro and ru keyboards)
- Translate Russian space and symbol keys.
- Rename Sym key to 123
This adds a new separate Romanian keyboard layout, with popup support.
- Functional buttons are translated.
- Pages 5&6 contain 3 groups of characters (I tried my best to group them logically):
- On the left: traditional Romanian cyrillic pre-1850s
- On the middle latinised forms from 1850s onwards
- On the right modern diacritics from 1900s to today
- Pages 7&8 add only large double quotes and section/paragraph mark.
- Popups are only avalable for most common diacritics. Swipe up for circumflex, swipe down for breve.
I can really call this the most complete though-the-ages Romanian keyboard. :)
Includes:
- New option to tune word spacing: space width scale percent
- Text: look for hyphenation in more words if needed
- CSS: fix "hyphens:none" should override inherited "hyphens:auto"
- getHtml(): grab dir= and lang= attributes from upper nodes
Replace our Word Gap/Space condensing toggle/setting with
a new Word Spacing toggle/setting, made of 2 values:
- 1st number scales the normal width of spaces in all font
(100% uses the font space width untouched)
- 2nd number applies after the 1st has been applied, and
tells how much these spaces can additionally be condensed
to make more text fit on a line.
The japanese keyboard being taller than the others, when
switching to/from it from/to another layout:
- re-init InputDialog for proper sizing and positionning
- refresh the whole screen, to remove any trace of
a previous taller keyboard
Also add calls to :free() here and there to free keyboard
keys' TextWidgets' XText C objects without waiting for GC.
The korean keyboard wraps InputText and overrides some
of its methods to process input in some specific way.
When switching to another keyboard layout, the original
methods need to be restored.
* Switch the last few remaining icons to true glyphs
(Del/Backspace & Enter).
Also, allow a glyph to be rendered in (fake) bold, and use it for Enter.
* Update fonts
Pickup the tweaked nerdfonts for the backspace symbol
Follow-up to #5583.
* Add separate Cyrillic/Russian keyboard
* And remove that from English
* Update French keyboard (is easy)
* Remove yahzhert, that was just a double of QWERTY
* Update Spanish keyboard
* Reduce Japanese to 4 layers and add globe
* Reduce Korean to 4 layers
* Reduce Greek to 8 layers
Option to synchronize files in local koreader folder with folder on Dropbox. All files that aren't on the local disk will be downloaded. Files with different sizes will also be downloaded and overwritten.
The download process can be paused or stopped at any time (similar to downloading images in Wikipedia).
Synchronize and settings are available after long press in dropbox account in Cloud storage.
Limitations: Only one folder (without subfolders) can be synchronize with one folder on local storage.
- height_adjust: if true, reduce height to a multiple of
line_height (for nicer centering)
- height_overflow_show_ellipsis: if height overflow, append
ellipsis to last shown line
(Implemented in both use_xtext and legacy code path.)
Use them in Menu.lua to clean up/shorten the code used for multiline
menu items by delegating the work to TextBoxWidget, or using
TextWidget when we end up needing only a single line.
Alternative code to size, split lines and draw text with
the help of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
- alignment_strict: prevent the inversion of the specified
alignment= that is done when a paragraph direction is
set or detected as RTL.
Also: fix possible memory leak (present even when not using xtext)
by calling :free() in onCloseWidget() like it's done in ImageWidget.
Alternative code to size and draw text with the help
of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
bump base for libkoreader-xtext.so:
- ffi/pic.lua: fix memory leak with some unsupported PNG files
- FreeType ffi: add methods for use with Harfbuzz shaping
- thirdparty: adds libunibreak
- Adds libkoreader-xtext.so: enhanced text shaping
Add a getFallbackFont(N) to each Lua font object to instantiate
(if not yet done) and return the Nth fallback font for the font.
Fallback fonts list: add NotoSansArabicUI-Regular.ttf
Add RenderText:getGlyphByIndex() to get a glyph bitmap by glyph
index, which is what we'll get from Harfbuzz shaping.
(RenderText:getGlyph() works with unicode charcode).
Tapping to turn page while some image is loading was
interrupting the image loading, but not turning the page,
since a82d7832 where using trap_widget=false is to be
used to not resend the event (while =nil does resend it).
It might be slower, but is needed to properly display
books in arabic, indic...
Also bump crengine: use FreeType "light" hinting algorithm,
which hints on the y-axis only (and so avoid messing with
advances and kerning on the x-axis).
* Unify battery meters look'n feel
Switch to proper (vertical) battery icons (one per 10% steps).
Fix#5535
* Bump fonts (https://github.com/koreader/koreader-fonts/pull/7)
Because we need the new symbols from nerdfonts ;).
(used by bookmarks list and classic file browser)
When text is too long or line too tall:
first: we try to decrease the number of lines (eg from 3 to 2 and from 2 to 1 line)
second: when 1 line is too tall, we try to decrease font size (-1)
And at the end we try to add or remove chars to better fit text.
Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
* Don't break `doc_pages` updates when it's completely disabled. (c.f., the commit's comment, doing it on every page turn seems a bit overkill, but I get that it's probably done that way because it was easier ;)).
* Detect the empty footerTextGenerator properly in `_updateFooterText` (it's `""`, not `nil`).
* Abort `_updateFooterText` early when the footer is invisible (and has been for a while/ever, i.e., when not requesting a repaint, like a mode switch would).
* Never send `SetBottomPageMargin` events twice.
* Minor tweaks to touchmenu & configdialog to avoid useless repaints (don't redraw the reader/fm unless we absolutely need to).
* Make sure we show the progress bar alone instead of nothing when disabling the last enabled mode in the menu.
Tap any part of screen to toggle bottom buttons visibility.
Swipe south to quickly close it (as long as image is scaled
to fit, and there's no need for panning).
bump crengine: enhanced RTL block rendering.
Includes:
- Re-enable: Use the same FT load flags in HB as in FT
- Avoid redundant calls to getStyle()
- CSS: parse and store "direction:"
- Enhanced block rendering: handle RTL direction
- Enhanced block rendering: handle RTL tables
- Pagesplitting: account for lines' text direction
- CSS: add support for more pseudo-classes
- epub.css: a few updates for RTL documents
- Fix LVDocView::getBookmark() which could be slow or wrong
Add a few style tweaks useful to RTL readers.
Wikipedia Save as EPUB: build proper RTL documents from
persian, arabic, hebrew (and others) Wikipedia articles.
And a couple bugfix this unearthed:
* Always set the default as the *current* value, no matter what (by chance, this was not an issue for margins).
* Don't crash on the hold gesture in the -/+ buttons for the horizontal margins (regression since #5303).
Thanks to <https://github.com/koreader/koreader/pull/5237> we can now extract the knowledge currently embedded in Transifex and put it directly in our source. This positively affects <https://github.com/koreader/koreader/issues/3754>.
Translation instructions and knowledge that comes out of localization-related questions should be preserved in the source, because Transifex is too ephemeral. For example, the links from <https://github.com/koreader/koreader/pull/2290> are no longer accessible. Even when they are, it's quite useful to have this information around while dealing with the code as well, and I also hope it'll be informative to contributors who seldom visit Transifex.
This commit also makes a few minor changes to obviate the need for comments where possible.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
This introduces context to our strings to differentiate them when necessary.
The syntax chosen is `C_()`, following [glib](https://developer.gnome.org/glib/2.28/glib-I18N.html#C-:CAPS).
```lua
local _ = require("gettext")
local C_ = _.pgettext
C_("Menu|StyleTweaks|", "Pages")
```
Closes#5232.
The current name causes people to think of scrolling, which is slightly awkward on E Ink. For example, see <https://github.com/koreader/koreader/issues/5166#issuecomment-517771475>.
> But this on LCD, not E-ink where the lag is unbearable, especially if you want to correct any scrolling over/undershoot.
Scroll mode is a misnomer. It should be renamed continuous. I use "scroll mode" as the default, but I seldom or never scroll. Conversely, you can still scroll in paged mode if a page is longer than the screen. As far as I'm concerned if you're scrolling (panning) you may be doing it wrong, but to anyone reading: you do you. ;-)
* Try to make sure restoreWifiAsync eventually sends a NetworkConnected
event...
re: #5109
* Take a page from @shermp's book, and make sure wpa_supplicant managed to
connect to the AP before acquiring an IP.
Tear down WiFi modules in case of failure.
c.f., https://github.com/shermp/Kobo-UNCaGED/pull/21
* Don't let restore-wifi-async.sh enable WiFi behind our back when we're
killing it to start Nickel...
* Don't even call ping if there's no default gw
Provides a bit more granularity than the generic "Ignore all
publisher margins" - and allow the same for paddings for books
that wrongly use paddings for that effect.
Main thumbnails and galleries items will float in "book" and
"web" modes.
Also use a honest User-Agent when requesting Wikipedia to
comply with their policy and avoid rate limitation (and
broken images).
- Updated "Avoid page break" tweaks to work on our latest epub.css.
- Added "New page on headings>" menu, as we no more break page on
H1, H2, H3 in EPUBs.
- Added "Center headings" as we no more have them centered.
- Added "Pure black and white" which can make some documents
more readable.
Adds "Render mode" toggle with 4 modes, to enable some or all
of crengine's new enhanced block rendering features.
Use "legacy" rendering for previously opened books to not mess
with bookmarks, and "web" (all of the new features) for new books.
Also make available the added "HTML5" stylesheet to the Style menu.
* Make toggling Gyro events more robust
Actually ask to turn it on/off depending on the setting, instead of a
blind toggle
A quick succession of suspend/resume events could otherwise leave it
in an unexpected state (i.e., off when it should have been on).
Specifically, how we ignore it.
No longer do anything specific and potentially racy, and let the
unexpected wakeup handler take care of putting us back to sleep.
Also add an option to only ignore wakeup events from the SleepCover.
Re #5098
Re #5087
For some mysterious reason, I have a duplicate default gateway on my
Forma, one with no metrics, and a proper one.
This ensures we pick the proper one.
I'm fairly sure this is temporary insanity on the part of my device,
but, still, it can't hurt.
route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 208 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 208 0 0 eth0
ip r:
default via 192.168.0.1 dev eth0
default via 192.168.0.1 dev eth0 metric 208
192.168.0.0/24 dev eth0 src 192.168.0.49 metric 208
* Make the cover thumbnail respect the cover's AR in the widget
* Add a "Mark as read/unread" button in the FM's longpress menu.
* Make sure the cover_info cache is wiped if necessary (sidecar purge/BookInfo cache clear).
The contained widget may not have integer position/dimen
(which should probably be fixed in those that don't ensure
that), and our maths could eventually make them even more
shifted by fractional parts.
In the end, when closing the widget, the refresh code may
miss painting/cleaning 1px and leave a border of the widget
on the screen.
- Popup footnotes: workaround strange behaviour of MuPDF
which is adding some unwanted margin above elements
with an "id=" attribute.
- In-page footnotes: also remove any left and right margin,
to keep footnotes aligned with the main text.
Also add 2 classnames (witnessed in quite a few recent
french books) to the list of classic classnames.
- Also bump crengine: CSS: fix parsing of multi classnames
and attributes selectors
Without having to resort to weird custom defaults.
* Split the current margins setting in three:
* Horizontal margins (because you generally want those two to be balanced).
* Top margin & Bottom margin (because you may want to tweak those separately to deal with quirky status bar/final line shenanigans).
* Also, add a "Reclaim bar height from bottom margin" toggle to the status bar menu, to optionally make sure the status bar won't eat into the bottom margin.
* Includes a free fix to diacritics popup refresh handling in the keyboard ;).
Extend the FR and ES keyboards from the EN one, and
just tweak what has to be changed.
This will allow them to stay in sync with the EN keyboard's
recent and futur developments of key popups.
Also make the FR keyboard a bit more AZERTY.
Eth (ð) is an important letter for people who like Old English (me), and for IPA.
Ď/ď is Czech/Slovak.
Đ/đ is sometimes an alternative rendering of ð, maybe because you could type it on a traditional typewriter. It's also Slavic and something Vietnamese.
Delta is an often-used Greek letter.
Companion PR to https://github.com/koreader/koreader-base/pull/884
* Basically flags devices known to be stable when using PxP inversion.
* Plus, random fix for #4870 ;).
* A few FrontLight tweaks & cleanups on Kobo:
* Moved the Kobo-specific startup status insanity to Kobo-specific init
* Made turnOff/turnOn frontlight do a smooth ramp down/up
* On Kobo, use turnOff/turnOn for suspend/resume, to get that smooth toggle
* On Kobo, for NaturalLight w/ a mixer, only set warmth for setWarmth, and only set Brightness for setBrightness, otherwise, it tried to set both with not in-sync values, which made the FL widget jittery.
Adds configuration to the top corners as well as the additional gestures hold and two-finger tap.
Deprecates `DTAP_ZONE_FLIPPING` and `DTAP_ZONE_BOOKMARK`.
Fixes#4877.
- Removed "Swipe to follow first link on page" menu item and
handling code, as it feels not really as practical as
"Swipe to follow nearest link".
- Removed recently added "External link action", as we can
just always present a popup with the url and the available
actions.
- Generic handling of these actions in onGoToExternalLink(),
so they are proposed on the Wikipedia lookup popup too.
- Allow external link on PDF documents (previously, only
internal links were handled).
- Have "Ignore external links on tap" available on all
document types.
- Added "Ignore external links on swipe" (default to true,
the current behaviour).
- Added multiswipe gesture "Follow nearest internal link"
(the existing "Follow nearest link" now follows the
nearest external or internal link)
- ButtonDialogTitle: added an option to look a bit more
alike ConfirmBoxes.
- Footnote popups: fix link unhighlight when tap on external link.
Otherwise it's:
1. Too small on virtually all devices due to a lack of scaling.
2. Unusably small by default.
It's currently scaled by the callers (dictquicklookup & footnotewidget) based on other properties, but you shouldn't have to change it from the default just to get something usable. ;-)
Have the code pre-invert some images when in night mode,
so they get inverted back to normal by night mode.
This will allow images to be displayed normally in
the following contexts:
- images in credocument pages
- long-press on images in credocument viewed in ImageViewer
- cover thumbnails in File browser and History
- full size covers when viewed in ImageViewer
- images in Wikipedia lookup results
* Add a toggle to disable the C blitter in the Dev menu (depends on https://github.com/koreader/koreader-base/pull/882) (never shown if the JIT is disabled, grayed out if the C blitter is not installed)
* Fix a few sizeUtf8Text call sites that were doing a nil check in order to account for the new return type.
* Tweak statusbar handling to avoid spurious sizeUtf8Text warnings when it's hidden, and unify its behavior between being hidden via toggle, and hidden on book open (at least when all-at-once is not enabled).
* c.f., https://github.com/koreader/koreader-base/pull/882 (Android, PB, RGB32 & Legacy Kindle regression fixes).
This internal ButtonProgressWidget widget was behaving
differently from all others (OptionTextItem, OptionIconItem
and ToggleSwitch) by duplicating some code from
ConfigDialog:onConfigChoose() instead of calling it directly.
While making it similar to others, I noticed that onConfigChoose()
did a full repaint, which was necessary for some settings to
be applied (ie: Contrast).
On CreDocument, this full repaint may cause some double drawing
on config changes (ie: Margins, drawing once after margin changes,
and then re-positionning to previous xpointer).
So, make the need for full repaint a condition on KoptOptions.
Remove gray underline on text items (font size items).
Adjust gray color of ButtonProgressWidget to match the
one of ToggleSwitch (just need to invert it, as it's
used to select button, which cause this color to be
inverted).
* Fix the "Enable debug logging" checkbox so that it properly disables "Enable verbose debug logging" when it gets disabled
* Avoid asking ImageWidget for alpha-blending when it's not useful
* Make ImageWidget's alpha-blending code-path double-check that alpha-blending actually is needed, and avoid it if possible
* In the same vein, only do alpha-blending in textboxwidget when absolutely necessary
* Prefer color constants over the gray() method, ensuring that they're part of the eInk palette
Depends on https://github.com/koreader/koreader-base/pull/853Fix#4774
Adds a toggle switch in the Orientation bottom config menu to
allow showing 1 page or 2 pages when in landscape mode.
Previously, this was hardcoded to be in 2-pages modes only
in some circumstances (device resolution + user dpi).
Partially resolves#4747. Will enable switching Wi-Fi on/off in the menu and getting the network status. However, a new Wi-Fi session lasts ~100 seconds and then terminates automatically, apparently, to save the energy. I believe it can be prolonged by some networking activity. Also it is not shut down if the auto suspension is disabled.
[fix, UX] Fix slow keyboard when double tap not disabled
When double tap is not disabled (only ensured in ReaderRolling),
repeated key hits were slowed down by it. This ensures
Input widgets that temporarily overrides it to be disabled
are satisfied.
Before multiswipes and the gesture manager this was impractical on touch-only devices, but no more!
Also includes some minor textual clarifications on some of the settings.
The concept is quite simple: stick a file on the OTA server named
something like `koreader-appimage-latest-stable` (by analogy with
`koreader-cervantes-latest-stable.zsync`), which contains nothing
but a filename.
The difference with the zsync update is that the link is then launched
in the user's browser (AppImage) or DownloadManager (Android, not yet
implemented).
* Android hasOTAUpdate = no for the moment
* Double-checks that the connection was successful, and forcefully kills WiFi if it didn't, to avoid leaving stuff in an inconsistent state.
Should fix#2183
* Limit the turnOffWifi call to devices where it might make some sense to
do
When we rotate to show a screensaver, restore original rotation *before* closing the ScreenSaver window.
And ensure closing the ScreenSaver *always* triggers a full update, no
matter the settings.
Fix#4621
* On Kobo, kill WiFi on startup if we detect an inconsistent state...
Untested, not terribly pretty.
The other solution is to slow down the Wi-Fi meny by doing the same
check for the "Wi-Fi connection" checkbox as in the later wifi_status
one...
* Don't enable auto_restore_wifi by default
It's liable to silently murder batteries for no good reason, given that
we prompt to enable WiFi by default when needed, and we otherwise have
no actual need to keep WiFi on in the background.
re #2215 (in particular, this directly contradicts @houqp in
https://github.com/koreader/koreader/pull/2215#discussion_r74696133 ;)).
* Various FocusManager related tweaks to limit its usage to devices with a DPad, and prevent initial button highlights in Dialogs on devices where it makes no sense (i.e., those without a DPad. And even on DPad devices, I'm not even sure how we'd go about making one of those pop up anyway, because no Touch ;)!).
* One mysterious fix to text-only Buttons so that the flash_ui highlight always works, and always honors `FrameContainer`'s pill shape. (Before that, an unhighlight on a text button with a callback that didn't repaint anything [say, the find first/find last buttons in the Reader's search bar when you're already on the first/last match] would do a square black highlight, and a white pill-shaped unhighlight (leaving the black corners visible)).
The workaround makes *absolutely* no sense to me (as `self[1] -> self.frame`, AFAICT), but it works, and ensures all highlights/unhighlights are pill-shaped, so at least we're not doing maths for rounded corners for nothing ;).
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
Supported devices:
- Boyue T61 and *some* clones
- Boyue T62 and *some* clones
- Onyx C67
- Energy Sistem (which are in fact Boyue T62 clones). Was tested on a energy pro 4.
Others may work with the same controller too, but are disabled by default.
Requires https://github.com/koreader/koreader-base/pull/798
Requires https://github.com/koreader/android-luajit-launcher/pull/96Fixes#4373Fixes#1613 (supported devices will show the "full refresh rate" option under eink settings. Others won't)
Related #4228 (need to add support for this specific device to work)
Revert 9971eb85 and make multi-lines strings more readable.
(Multiline translatable strings extraction has been fixed
in koreader-misc tralua_xgettext.py.)
Includes:
- (Upstream) Harfbuzz light: fix rendering of fallback font
- CSS: adds support for 'orphans:' and 'widows:' properties
Adds some Style tweaks related to Widows and orphans.
* use product as device model
* print android version (codename + number) + api at launch
* exit the application properly
* fix fullscreen switching (and disable it on newer android versions)
* gettext: lower log level for message: cannot open translation file
* android common settings refactor
- Remove duplicated "Show footnote popup". Have the same setting
applied for Tap or 'Swipe to follow nearest link'.
- Make some menu items enabled or disabled depending on if they would
have some effect with the current state of other menu items, as
some kind of visual self-documentation of these dependancies.
- Add menu item to set the footnote popup font size, relative to
the book font size.
- SpinWidget: allow for showing some informative text
Includes:
- EPUB: workaround ZIP files with corrupted central directories
- Supports book text encoded in WTF-8
- Harfbuzz kerning (full): fix possible wrong flags
- (Upstream) Adds new kerning method: Harfbuzz light, without ligatures
Adds Harfbuzz light kerning methods as the 3rd toggle.
Small fixes to widths computation for a more balanced layout.
Decreased min width of names (on the left) from 33% to 25%, to
allow more room for toggles on the right.
(May make things a little bit too stretched out with english,
but should help with other languages that use longer words to
name things than english.)
Also ignore disabled option names in the names width calculation
(noticable on the PDF right most config menu, where toggles were
uneededly too small)
When no height= provided, and the InfoMessage would overflow
screen height when some long message is provided, decrease the
font size until the widget fit.
Defines new function reconnectOrShowNetworkMenu(), which iterates over
available networks ordered by signal power, and check if we can connect
to saved SSIDs. If we can, then skip network list dialog.
* Fix the Touch input probe on Trilogy devices that depend on the touch_probe_ev_epoch_time quirk (fix#630)
* Expose a "Pageturn button inversion" feature in the Navigation menu (for all devices with keys) (fix#4446)
* Allow ignoring the accelerometer on the Forma (Screen > Ignore accelerometer rotation events; also available from the Gesture Manager) (fix#4451)
* Fix SleepCover handling on the Forma (fix#4457)
* Make isWifiOn a tiny bit more accurate (check the actual WiFi module instead of sdio_wifi_pwr)
* Move all flash related Screen options to the eInk submenu
Split the In-page footnotes tweak into 3 distinct ones,
mainly because I want the 3rd one with classic class names
to be disabled'able, while keeping the others, in case
these classic class names are not used for footnotes.
Also fix footnotes list-style-type in Wikipedia EPUBs,
which may have been wrong (but it was less noticable when
following page links because of the little black marker,
or showing them in popup footnotes where the number/letter
is not shown).
For a hidden setting already present, and used in
/apps/reader/modules/readerback.lua
Only shown, as the whole Navigation> submenu, on
devices with keys.
Adds 2 tweaks to allow displaying footnotes at the bottom of pages,
like it's done in some printed books. This will work only with
books with correctly specified footnotes with the adequate EPUB
attributes, and with Wikipedia EPUBs. But users may be able to
activate them for other books with some user style tweaks.
Adds a few tweaks to control the build of the alternative TOC.
With some user style tweaks, one may be able to build a usable
TOC for some badly formatted or converted books.
Also fixes 2 paragraphs tweaks.
* On zsync delta failure, offer to retry OTA update with a full download
Fix#4429
* Bring the "this may take a while" popup back up before full DL
Don't rebuild the local tarball for a full dl, we're ignoring it anyway
;)
Co-Authored-By: NiLuJe <ninuje@gmail.com>
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
Split https/http code-path (as socket.http can adjust the Authorization/Host headers automatically)
Warn the user when the protocol differs from http/https
* Virtually the entire list that was originally on Sourceforge, except for some dictionaries with unclear or questionable licences.
* Without the Webster's duplicates. The GCIDE (GNU Collaborative International Dictionary of English), already included, is the extended version of it.
* Without Freelang. To "dissociate" dictionaries, the permission of individual authors has to be obtained.
Many thanks to @avsej who prepared it all.
See https://github.com/koreader/koreader/pull/3176#issuecomment-447085441
Update translator.lua to use a still working google translate API.
Add a method to show translations (main and alternates) in
a TextViewer.
Re-enable "Translate" button in text selection/highlight buttons
dialog.
Target language can be set with a manually added setting:
translator_target_language = "fr"
and will fallback to the UI language.
By adding a `sorting_hint` to a menu item, the program will put orphaned items in the relevant (sub)menu instead of in the first menu with a NEW prefix.
Fixes#4393.
Includes:
- (Upstream) Fix dangerous compile warnings
- Fix max image height to prevent spurious page breaks
- Hide <epub:case> in <epub:switch>, show only <epub:default>
Adds a style tweak to show <epub:case> and hide <epub:default>
for the curious person.
We don't need that first-level menu to be short
as it contains no tweak itself (only the submenus
with toggable tweaks need to be kept shorter to
let room below to see the tweak effects).
bump crengine, which includes:
- Adds support for symbol fonts (local or embedded)
- Fix some issues when rendering text in constrained width
- Page splitting: fix possible missing blocks
- CSS: adds support for 'auto', ignore % for borders
- Fix right border drawing position
- Fix: adds missing properties in copystyle()
- Adds comments, erm_killed rendering method
- Adds getRenderedWidths(): get node min/max node content width
- Tables rendering: fixes and improvements
- getRenderedWidths: enable min_width to be a single CJK char
- Fix wrong text wrap avoid in some case
- epub.css: add style for 'blockquote'
- Fix rendering issue when line ends with an image
Adds a few style tweaks related to tables.
Enforce table width: 100% in Wikipedia EPUBs to keep
previous look, which feels better with the various kinds
of tables in Wikipedia pages.
Fix unit tests as juliet.epub (full of blockquotes), grew quite
a few pages with the epub.css update.
When Wifi is connected, the message "Connected." stays on the screen
waiting for the user feedback. The change sets reasonable timeout
for info message to disappear
When a main document is opened for displaying, some other
document openings (for getting metadata or cover image)
could affect the main document.
Split some code from CreDocument:init() into another new
method CreDocument:setupDefaultView(), that will only be
called by ReaderUI when opening the main document (and not
by these other openings like Book inforation, View cover...)
Also speed up some of these other openings (Search, Screensaver)
by using doc:loadDocument(false) to load only metadata and
avoid parsing the HTML.
Details in https://github.com/koreader/koreader/issues/4346#issuecomment-440036496
The font size items (Aa Aa ... Aa) and the align & column
items (for PDF) had a non-tapable spacing between them,
which could make hitting an item difficult.
This replaces this spacing by padding on each side of the item,
so a tap in between will always catch one item, for easier
selection.
- ReaderConfig does not need to call again self:initGesListener() on
screen rotation/resize, as it uses the TouchZone infrastructure
that deals itself with rotation. So, it was adding new gestures
that were overriding tap on footer and preventing it from working.
- ReaderFooter: fix refresh area (which was too small when toggling
from hidden to visible)
- ReaderToc: fix crash when showing TOC in scroll mode after rotation
- Menu: fix crash when no onReturn defined (could happen when tap on
bottom left corner when showing an empty TOC)
bump crengine, which includes:
- Avoid uneeded re-rendering on load when with full status bar
- Update french hyphenation pattern
- Fix border-collapse on table cells in some cases
- Fix line-height inheritance when no unit
- Fix: don't ignore space following an image
- Fix: ignore occasional space at start of line
- Fix possible segfault when viewing HTML
- Fix and extend support of vertical-align
Also add a style tweak to middle align images with text, which
may make some text with inline icons and such nicer (depending
on images sizes and selected Zoom/DPI).
When a link is covered by the footnote widget, we highlight it
again when closing the footnote, and schedule an unhighlight
0.5s later.
When we tap on another footnote link, this was happening too
but the unhighlight unhighlighted all, including the new
footnote link.
This disable the former when the latter happens.
Adds new options to the Links> submenu, for now only
available and used with CRE documents.
- Allow larger tap area around links
- Ignore external links
- Show footnotes in popup
- Show more links as footnotes
(This last item is mostly for testing and loosening the
footnote detection algorithm, and see how it would behave
with glossary-like links and inter glossary terms links.)
Fix distance computation from gesture position to link by
using segments.
Code for detecting if a link is a footnote is in cre.cpp, and
tweakable a bit with flags in ReaderLink:showAsFoonotePopup().
Footnotes HTML content is displayed by a new FootnoteWidget,
which uses MuPDF for its rendering.
From it, swipe south or tap outside to close, swipe to the left
to follow the original link and jump to the footnote location
in the book.
Also fix tap on highlights after the recent change to use segments
for displaying: use segments also when checking taps.
Manager supports separate gestures for the file manager and the reader. Gestures from the manager have a higher priority than built-in gestures.
Settings available in Gear -> Device -> Gesture manager
Mostly all that have a close button at top right, that may
be hard to reach or hit for some people: TOC, Bookmarks, History,
KeyValuePage (Book information, Statistics...), Book status...
Added full refresh on diagonal swipe where it was missing.
CoverMenu: removed onSwipe override, as it had become the same as
Menu a few months ago.
* Don't optimize away a touchmenu unhighlight when we need it
Fix#4234
(Regression after #4189, which, incidentally, gave us a neat way to
handle the issue, which was theoretically present well before that ;)).
* Bump base
Pickup latest changes, just because we can ;).
(OpenSSH bump)
TouchMenu: added options to menu items with the following defaults:
keep_menu_open = false
hold_keep_menu_open = true
So, default for Tap callback is to close menu, and for Hold callback
to keep menu open.
In both cases, provide the TouchMenu instance as the 1st argument to
the callback functions (instead of a refresh_menu_func I added in #3941)
so the callback can do more things, like closing, refreshing,
changing menu items text and re-ordering...
ReaderZooming: show symbol for default (like it was done for
ReaderFont, ReaderHyphenation...)
TextEditor plugin: update the previously opened files list in real
time, so the menu can be kept open and used as the TextEditor main
interface.
SSH plugin: keep menu open and update the Start/Stop state in real time
ReadTimer plugin: tried to do what feels right (but I don't use it)
Also remove forgotten cp in the move/paste file code
Provided by @gerhaher: removed some duplicated keys, replaced
them with other useful ones (to swedish and kenyan people).
Stick cyrillic letter io to a single key
French keyboard: aligned to std.lua, fixed '.' and ',' keys.
- css tweaks: use correct CSS "hyphens:" instead of "hyphenate:"
- screenshoter: more logical order of lines (no change in what it does)
- textviewer: make diagonal swipe really trigger a full refresh
- textwidget: more adequate text length to help with centering
- toggleswitch: fix sizing & centering with correct calculations
(this reduces a bit the size of switches, and may cause a new
truncation in some translations)
Feature of ScrollTextWidget, only used for now by TextEditor.
Pan is like Swipe, but wait a bit at end of gesture to release:
the line on which Pan was started will be moved to where Pan is
released.
May conflict with MovableContainer (so not enabled for DictQuickLookup,
where it could have been nice - but it would work only with text
dictionaries, not with HTML ones, as ScrollHtmlWidget can't really
do that).
* Bump base
* Fix tar flag ordering in OTAManager
So that no-recursion actually gets honored, preventing us from creating
extra-large archives with unrelated content...
(Tar started being pickier about flag ordering in a recent version bump).
Fix#4147Closes#4148 (by superceding it)
Don't consider sidecar file when sorting by access time.
Rename 'sort by title' to 'sort by filename':
This is in accordance with the actual function of the code, which
uses filename rather than title as specified in file metadata.
This plugin mostly sets up a "Text editor>" submenu, that allows
browsing files, creating a new file, and managing a history of
previously opened file for easier re-opening.
It restore previous scroll and cursor positions on re-opening.
Additional "Check lua" syntax button is added when editing
a .lua file, and prevent saving if errors.
The text editing is mainly provided by the enhanced InputDialog.
InputDialog: added a few more options, the main one being
'save_callback', which will add a Save and Close buttons
and manage saving/discarding/exiting.
If "fullscreen" and "add_nav_bar", will add a show/hide keyboard
button to it.
Moved the preset buttons setup code in their own InputDialog
methods for clarity of the main init code.
Buttons are now enabled/disabled depending on context for feedback
(eg: Save is disabled as long as text has not been modified).
Added util.checkLuaSyntax(lua_string), might be useful elsewhere.
Explicit new options: select_directory, select_file, show_files.
With select_directory, show an entry to select current directory
(so, removed undocumented hack "hold on .. to select current
directory").
Some problem somewhere with [[...]] strings starting with a
leading newline. Should probably be allowed, but for now
fix the few such cases to allow them being translated.
InputText: checks whether provided content can be given
back unaltered, which may not be the case after it is
splitted to UTF8 chars if the text is binary content.
Prevent editing text if that is the case.
Adds InputText and InputDialog :isEditable() and :isEdited()
methods.
Also accounts for the scrollbar width when measuring text
to prevent it from being displayed when not needed.
Also ensure a minimal size of the scrollbar thumb so it is
rendered when huge text with many lines is displayed.
Virtual keyboard: Hold on Backspace: delete from cursor
to start of line instead of clearing all text content.
* Make findcalibre actually useful
By setting SEARCH_LIBRARY_PATH when a Calibre tree is found, so that
book paths can properly be constructed.
Users should still very much set it themselves, but at least everything
works as intended when not, instead of mysteriously half-breaking later.
Drop the SetDefaults bits, it appeared to have been added to fix no-ops
detected by Luacheck, and it's actually non-functional, because
SetDefaults doesn't handle saving variables it did not itself assign.
So this was just causing the "Do you want to save new defaults" popup to
show up on exit, but it couldn't actually do anything useful (like, say,
save the new SEARCH_LIBRARY_PATH value).
fix#4082
* Better comments about the state of NaturalLight on the Clara, and how this might translate to the H2O²r2.
re #4015
* Make ScrolltextWidget refresh as "partial" only on actual Scroll events
Moving the cursor should stay "ui", or things gets annoying really fast
;).
re #4084
* Bump base to pickup ZMQ fixes (fix#4086)
InputText, ScrollTextWidget, TextBoxWidget:
- proper line scrolling when moving cursor or inserting/deleting text
to behave like most text editors do
- fix cursor navigation, optimize refreshes when moving only the cursor,
don't recreate the textwidget when moving cursor up/down
- optimize refresh areas, stick to "ui" to avoid a "partial" black
flash every 6 appended or deleted chars
InputText:
- fix issue when toggling Show password multiple times
- new option: InputText.cursor_at_end (default: true)
- if no InputText.height provided, measure the text widget height
that we would start with, and use a ScrollTextWidget with that
fixed height, so widget does not overflow container if we extend
the text and increase the number of lines
- as we are using "ui" refreshes while text editing, allows refreshing
the InputText with a diagonal swipe on it (actually, refresh the
whole screen, which allows refreshing the keyboard too if needed)
ScrollTextWidget:
- properly align scrollbar with its TextBoxWidget
TextBoxWidget:
- some cleanup (added new properties to avoid many method calls), added
proxy methods for upper widgets to get them
- reordered/renamed/refactored the *CharPos* methods for easier reading
(sorry for the diff that won't help reviewing, but that was needed)
InputDialog:
- new options:
allow_newline = false, -- allow entering new lines
cursor_at_end = true, -- starts with cursor at end of text, ready to append
fullscreen = false, -- adjust to full screen minus keyboard
condensed = false, -- true will prevent adding air and balance between elements
add_scroll_buttons = false, -- add scroll Up/Down buttons to first row of buttons
add_nav_bar = false, -- append a row of page navigation buttons
- find the most adequate text height, when none provided or fullscreen, to
not overflow screen (and not be stuck with Cancel/Save buttons hidden)
- had to disable the use of a MovableContainer (many issues like becoming
transparent when a PathChooser comes in front, Hold to paste from
clipboard, moving the InputDialog under the keyboard and getting stuck...)
GestureRange: fix possible crash (when event processed after widget
destruction ?)
LoginDialog: fix some ui stack increase and possible crash when switching
focus many times.
The Dogear icon is 20x20 pixels and was never scaled where used. Now:
- The bookmark icon (top right of screen) is scaled to 1/32th of the screen
width (previously, it was 1/30th on a 600px wide emulator, 1/53th on a GloHD).
On CreDocument, furthermore decrease its size if needed depending on the
selected margins so it never overwrite the text.
- CoverBrowser list view: scale it to the available room under
the "N % of P page" text, so it does not cover "page".
- CoverBrowser mosaic view: scale it to 1/16th of the cover rectangle, which
should prevent if from overwritting the text thanks to a max text width of
7/8 of the cover rectangle.
Also for CoverBrowser: don't index metadata for unsupported document
(which could happen when browsing files with PathChooser) and show
full filename for such documents.
Also: ImageWidget: small fix in case we use both scale_factor and
scale_for_dpi.
* Unbreak dropbear after #4077
* Move the Kindle SO check to init
* Various virtual keyboard fixes to eradicate the remaining refresh conflicts (i.e., tearing artifacts), no matter the user's settings. (re #4069, re #3130).
- add refresh after tap Cancel button,
- radiobutton and checkbutton with the same font size,
- truncates text outside window,
- better control font face and size in OpenWithDialog
and RadioButtonTable widgets
* Reader menu: adds "Open previous document"
Allows for quick switching between 2 documents, and keep
symmetry with FileManager menu "Open last document".
* Use "Last:" and "Previous:" when Show filename
* Handle OTA updates during the restart loop on Kobo/Kindle
So we can actually process OTA updates without ever truly exiting
KOReader (i.e., via the "Restart KOReader" menu entry) ;).
* With a bonus version normalizer fix.
* And a zsync bump/fix to avoid softlocks with OpenStack HTTP frontends (also, pull those from the OTA mirror list).
* Discard dotfiles when looking for fonts
So as not to pickup, among other things:
* macOS resource forks
* *nix hidden files (which may be stale fuse ghosts on Kindle)
* Update Kindle font blacklist
Up to FW 5.9.6
Basically blacklist anything non-LGC, requiring lab126's FT build, or FC tweaks.
One day we'll fix CRe instead, maybe.
* Link to the WiKi, it's a bit more explainy ;).
* More WiFi trickery for some HW revs
* Fix Rev2 detection under KSM
That's to future-proof it, the other end of this hasn't made it into
current KSM build yet.
* Resync nickel.sh w/ current rcS
We don't have CPU, but we have PLATFORM, which is based on CPU, so,
that'll do :).
* Go back to using rmmod instead of modprobe -r
Functionally identical on current FW, will potentially avoid getting
outsmarted by modprobe if Kobo ever deigns shipping an actually usable
Linux system one day...
* Don't crash if screensavers directory doesn't exist
c.f., https://www.mobileread.com/forums/showpost.php?p=3706979&postcount=2919
Includes:
- Avoid page break between a node and its borders
- Allow building an alternative TOC from document headings
On CRE documents, allows toggling between original TOC and an
alternative TOC with long-press on the "Table of content" menu
item.
Also update the Wikipedia stylesheet to further avoid
page-breaks between images and their caption, so a full
bordered wikipedia thumbnail is always full on a single page.
* Switch all initial highlights to "fast" update
i.e., everything that does an invert
Plus a few other things that refresh small UI elements onTap
Re #3130
* Tweak refreshtype for a number of widgets:
* Fix iconbutton dimen
* Make touchmenu flash on close & initial menu popup. Full-screen on close.
* Use flashing updates when opening/closing dictionary popup. Full-screen on close.
* Switch FileManager to partial.
It's mostly text, and we want flash promotion there.
* Make configdialog & menu flash on exit
* Make FLWidget flash on close
* virtualkeyboard: flash on layout change & popup.
* Potentially not that great workaround to ensure we actually see the
highlights in the FM's chevrons
* Flash when closing BookStatus Widget
* Optimize away a quirk of the dual "fast" update in touchmenu
* Promote updates to flashing slightly more agressively.
* Document what each refreshtype actually does.
With a few guidelines on their optimal usecases.
* Switch remaining scheduleIn(0.0) to nextTick()
* Tighter scheduling timers
Shaving a hundred ms off UI callbacks...
* Cache FFI C Library namespace
* Ask MuPDF to convert pixmaps to BGR on Kobo
Fix#3949
* Mention koxtoolchain in the README
re #3972
* Kindle: Handle *all* fonts via EXT_FONT_DIR instead of bind mounts insanity
* Make black flashes in UI elements user-configurable
(All or nothing).
* Jot down some random KOA2 sysfs path
- Fix getting xpointer to current page
- epub.css cleanup
- fb2def.h update
- Fix a few edge-case rendering issues
- Fix border being drawn in spite of 'border-width: 0'
Also update Wikipedia epub.css stylesheets regarding
recent HTML fixes and enhancements.
Remove "Remove all borders" workaround tweaks, as it's
now fixed.
(Unit tests failure to be fixed in upcoming commit)
Books previously opened (that have a metadata.lua, whether with
highlights or not, but because they all have a last_xpointer that
points to the current page, that can be broken too by the changes)
will continue to have the old wrong behaviour, so they won't be
impacted by the breaking changes.
Update cre_dom_version code to use the new functions from cre.cpp.
Remove these Workarounds from Style tweaks.
Alternate rendering of list items as block elements (instead of
inline/final).
Check the built DOM is still coherent with styles on stylesheet
change, and propose to reload the document if not. Also
invalidate cache on close in that case so a new DOM is built
at next opening.
ReaderStyleTweak: fix tweak css duplication; when globally
enabled, when disabling and re-enabling locally, the css would
be added twice to the final CSS.
Also adds !important to "sub_sup_smaller" tweak, and increase
its priority so it can override "font_size_all_inherit".
Adds CreDocument:getCacheFilePath() for futur features.
Changed from 1 second to 2.
I also fixed the problem with blocking the UI when displaying the message. Now notification box is closed after taping anywhere (like InfoMessage).
* Minor cleanup
We don't ship Droid Sans Fallback anymore
* Tweak UI fallback font list for better coverage
* Bump base & fonts
To pickup related changes
Also allows for updating the fallback font and see results
in real-time on the underlying document.
Bump crengine for: fix updating fallback font
Also adds a menu item to generate a html document showing some
sample text rendered with each available font (only if the user has
a file koreader/settings/fonts-test-sample.html with some HTML
snippet of his choice).
Avoid drawing the fill bar our of the progress bar.
Avoid zero divided by zero that return 'nan' (Not a Number),
that does not bother lua code, but will crash libblitbuffer.so
when it gets nan as a coordinate.
New module RenderImage (alongside existing RenderText) to provides
image rendering and scaling facilities.
Uses MuPDF, but tries first giflib on GIF.
Allows for getting all the frames from an animated GIF.
When hyphenating a word, the existing algorithms enforced a minimal
length of 2 for each word fragments on left or right side.
This adds a widget to allow changing these minimal sizes (from 1 to 10).
Removed width:80% as it was never supported by crengine (the effect
was achieved thanks to margins and paddings).
Wikipedia saved articles from now on won't be effected by a double
effect if we later add full support for width: into crengine.
* Wiki Save as EPUB: various encoding fixes
Fix display of & in article titles
Fix display of &, <, > in TOC entries and in targeted anchor (the mismatch
with the target id made these TOC entries invalid and simply not displayed).
Remove percent-encoded URLs tweaks for crengine now that crengine
correctly supports them (each percent encode handled as an UTF8 byte).
Bump crengine for that.
Don't include <meta name="cover"> when no cover present.
* bump base/crengine
Transifex warns about some issues but this is not one of them.
The proper solution would be `padding_right`. But although it's supported on FrameContainer it's not passed on through TextBoxWidget.
If the device supports it, add a checkbox for enabling automatic
warmth, and a widget for setting the hour at which warmth should be
maximal ("bedtime").
The hour can be changed through +/- buttons; holding them will change
with 30min steps. As soon as automatic warmth is enabled, the 'warmth'
cannot be changed manually anymore, so we make its widget grey, but
the current value is still displayed correctly. Changing the hour
changes warmth accordingly.
* [VirtualKeyboard] Add support for keynaviguation
Also rename the variable "layout" to "keyboard_layout" because conflict
with the layout from the focusmanager
* Make the goto dialog compatible with key naviguation
My solution is to change the order of the widget. The last one will the
virtualkeybard so it catch all the keybinding, and below it, make the
dialog "is_always_active = true" so it can receive touch event.
* Correctly show the virtual keyboard on dpad devices
* change the order to call the virtualKeyboard so it end up on top
* Handle the multi input dialog
* Support reopening the virtualKeyboard by the Press key
* add check focusmanager
* Fix https://github.com/koreader/koreader/issues/3797
* MultiInputDialog : Now work on non touch-device
* Set the virtualkeyboard to be a modal widget
* Fix the layout in multiinputwidget
* Fix for the various combination of
hasKeys,hasDpad,isTouchDevice
* [Focusmanager] Better handling of malformed layout
* [toggleswitch] Add support for key navigation to this widget
Add the onFocus an onUnfocus event handler
add a new function that just circle the switch if not touch event is
detected
* Add key navigation to the readermenu
The shortcut is still Alt-gr on sdl, to be defined on Kindle
* Remove the old method of handling the Press key.
Now the event is handled by the main widget who implement focusmanager
and then dispatched to the currently focused item.
Modify the fine font tuning only for non touch-devices
See : https://github.com/koreader/koreader/pull/3785#issuecomment-375306466
Emulate the hold touch behavior on non touch device by clicking the right key
ButtonTable: do not add vertical separator to the layout because the focus
manager can't traverse them. Add check to make disabled button non-clickable.
Navigating the TOC, viewing a full screen image, browsing
reading stats... would call paintTo() on ReaderUI (so, asking
the engine to render the page) or FileManager (so, rendering cover
images) even though their content is hidden.
Widgets registering to UIManager have to explicitely states
they cover the full screen (UIManager can't know, parts of their
dimen may be transparent, e.g. if it is a CenterContainer).
Also uses PathChooser (instead of InputDialog) in 'Set Wikipedia
Save as EPUB directory'. When setting not yet set, propose to
create and use ~/Wikipedia/ .
* [device][kindle4] add fake event to kindle4
* modify focusmanager to allow for more complex layout
The focusmanager now naviguate the layout by avoiding nil value
instead of relying on table lenght. It should be completely backward
compatible
* add Dpad naviguation to the touchmenu
* fix crash because virtualkeyboard on non touch device
the kindle4NT has no keyboard nor touch, the fix open the virtual
keyboard so koreader dont crash but it's not useable
* Enable device with keys to use the touchmenu
* Don't get stuck in reader progress statistics plugin
* [underlinecontainer] Fix and remove unused function
References #1898.
For devices with natural light (KA1, H2O2), add new button 'Configure'
at the bottom which will open the naturallightwidget, which will be
placed at the top. The frontlightwidget will be moved to the bottom,
and both have permanent focus. This way, you can change the parameters
and immediately test them by changing the frontlight level and
warmth. On the KA1, both widgets will easily fit, but on smaller
devices it may be that they overlap.
Since the frontlightwidget will keep focus, we disable the 'Configure'
button when the naturallightwidget opens. We also remove its 'Close'
button and disable 'onTapCloseFL', so that the frontlightwidget cannot
be closed while the naturallightwidget is displayed.
This widget is used to configure the natural light on KA1/H2O2. It
allows the user to set the gain/offset values for white/red/green, as
well as the exponent used in the formula.
Numbers can be changed via screen keyboard or through the plus/minus
buttons next to the numbers (holding the buttons will in/decrase with
smaller steps). Changes are applied immediately, but will only be set
permanently if 'OK' is pressed. If 'Cancel' is pressed, the new values
are discarded and the old ones restored. Also, pressing 'OK' will save
these values in the koreader settings file (there's no support for
changing these values in Nickel, so there's nothing to sync to its
config file). The 'Restore Default' button will install the original
defaults that were derived from Nickel's behavior.
This widget is meant to be called from the frontlight widget and is
placed at the top, so that the frontlight widget can still be used to
test the current values (see next commit).
Some Hold and move (hold on title and move away from it) would not work.
Pan (=swipe with hold at end) while selecting text would move the
window (it now does nothing: proper text selection still needs Hold
on word at start).
Also increase hold duration from 2s to 3s (for switching lookup
between dict/wikipedia) to be consistent with the 3s duration in
readerhighlight.
If the device supports natural light (currently only KA1), extend the
frontlight widget to also allow for changing the 'warmth' value. We
more or less duplicate the widget for 'brightness', with the exception
that we drop the 'toggle' button, which does not make much sense for
the frontlight's warmth. Also, we add captions 'Brightness' and
'Warmth' for clarity.
First item would be underlined if the device is both Touch and Keys
capable (emulator, android, pocketboot...), which is not really
pretty. Delay that till Keys for focusing are really used.
Also fix some bad filename and extension in epub's OEBPS/content.opf,
Store image files (jpg, png, gif) uncompressed in the .epub as they
don't need compression.
crengine may now give us multiple authors (if multiple <dc:creator>
in epub metadata) separated by \n.
Deal with that where needed.
Limit the number of authors displayed in coverbrowser views.
Bumped base/crengine: multiple <dc:creator> + fix mobi images order
Bumped base: util.runInSubProcess(): give child its own process group
When no manually added specific 'poweroff' or 'reboot' screensaver
settings, use the suspend/sleep settings set via menu with an added
overlay message in top right corner.
Generalized some settings: "White background behind message and images"
and "Stretch covers and images to fit screen", and move "Exclude this
book's cover from screensaver" up a level (and remove this menu item
added by ReaderMenu when closing document).
Don't use memory cache with rendered screensaver images.
ImageWidget: fix wrong behaviour (stretch) when 'file', 'width',
'height' and 'scale_factor' provided: now, keep aspect ratio.
ImageWidget: increase file image mem cache (mostly used for icons)
from 2 to 5MB to be ready for devices with very high DPI.
(each one at top right of each page)
Such images can be loaded dynamically when the display of a page requires it.
Allow alternating between the image and its title with Tap on it.
Allow for viewing this image zoomed in ImageViewer with Hold on it.
DictQuickLookup: add generic support for result.images, that
could optionally be provided in Wikipedia lookup results.
New TrapWidget: invisible full screen widget for catching UI events. Can
optionally display a text message at bottom left of screen (ie: "Loading..."),
used by default by Trapper:dismissable functions when no widget provided.
Added Trapper:dismissableRunInSubprocess() to run a lua function in
a sub-process, allowing it to be dismissed, and returns its return
value(s).