max_autosave_num in the config files sets the number of autosaves to keep (default 16)
MAX_NUM_AUTOSAVES in Makefile.config sets the default value. 16 is used if no value is given
this behaviour can still be overwritten by keep_all_autosave (openttd.config setting)
Note: this is a requested behaviour for PDA ports, since they got limited storage space
- Benchmark shows that NTP is now around 10x faster than NPF.
- Made IsTunnelTile macro to determine if a tile is a tunnel.
- Added some useful debugging functions for making tiles red / getting accurate timestamps.
- Remove old depot finding algorithm.
- Disable warning for signed/unsigned comparisons.
- Feature: [pbs] Implement autoplacement of pbs blocks, when a block has an entry and an exit pbs signal, covert the entire block to pbs. Can be turned off in the patch settings.
- Feature: [pbs] Allow showing of reserved status by making the tracks darker, when the pbs debug level is at least 1.
- Codechange: [NPF] Check the railtype along a route against the engine type instead of against the previouse tile. This clears the way for electriefied rails.
- Add: [NPF] [ 1209644 ] A penalty for crossings (peter1138)
- Add: [NPF] Reversing inside of depots now has a penalty. It also applies to trains only, other vehicles shouldn't bother reversing.
- Fix: [NPF] When checking whether to reverse a train, the trackdir of the first loc was used instead of the last vehicle as a starting node for pathfindig.
This might have caused some trains not reversing when they should have (or vice versa). Typo introduced when converting to GetVehicleTrackdir() in r2256.
- CodeChange: [NPF] Removed duplicate code by letting NPFRouteTjoStationOrTile() call NPFRouteToStationOrTileTwoWay().
- Add: [NPF] NPFRouteToDepotBreadthFirstTwoWay() to find a depot while also looking backwards.
- Add: It is now possibly to specify a path cost for aystar starting nodes.
Buoys will now try to get within 3 tiles of a buoy instead of a the actual buoy tile. This gets ships to got past buoys in a realistic (IMO) way instead of barging right through them.
- Fix: [NPF] Trains get curves penalties sometimes even when the track is straight.
- Add: [NPF] Ships get a penalty for going over buoys now, so they will try to go around.
- Add: [NPF] Ships get a penalty for curves too, yay for straight lines.
- Add: TrackdirToTrack(), TrackToTrackdir(), IsDiagonalTrack() and IsDiagonalTrackdir() helper functions.
- Add: IsBuoy() and IsBuoyTile() helper functions.
- Codechange: Rearranged part of the control flow of ShipController(), removing a goto.
- I also changed an order of strings from On, Off to Off, On, so this can be used ingame with the WWT_4 widget type.
- Since the newssettings now take 2 bits per setting (off/summary/on) _news_display_opt is widened to 32 bits and the settings code changed slightly to accomodate for a maximum of 16 message-types.
-Add: added 'pause_on_join' and 'max_join_time' for MP games, where you
can auto-pause the game when a client wants to join the game. This to
avoid connection losses because of big maps (200+ trains). (with tnx to
#openttdcoop for the ideas and testing)
- Fix: [ 1153926 ] All my settings in vain... IGNORED!
- Change: I hope I got it all right. Pressing 'New Game' (either choosing random or a preset scenario) and 'Create Scenario' will start a new game with the settings and difficulty in the intro menu. Using 'Load Game' and 'Play Scenario' will take the values from the savegame/scenario itself.
- name_spanish_1, name_french_1, name_czech_1, name_romanian_1, name_finnish_1
and name_german_hardcoded were renamed to *_real.
- name_slovakish_1 was renamed to name_slovak_real.
- name_finnish_2[ab] was renamed to name_finnish[12].
- Added comment near the town_names setting definition about the "Slovakish"
pigginess.
trains in one game (instead of the 240 which was the current value).
Default max allowed vehicles per type is changed:
Trains: 500 (old 80)
Road: 500 (old 80)
Ships: 200 (old 40)
Aicraft: 300 (old 50)
(Tnx to Celestar and Darkvater for checking the patch)
REMINDER FOR ALL DEVELOPERS:
We do have 2 patch-setting-arrays: player-based, server-based. PLEASE
put your new patch setting in the right one... thank you :)
- Supports trains, road vehicles and ships.
- Uses A* pathfinding (same codebase as the new ai).
- Currently unlimited search depth, so might perform badly on large maps/networks (especially ships).
- Will always find a route if there is one.
- Allows custom penalties for obstacles to be set in openttd.cfg (npf_ values).
- With NPF enabled, ships can have orders that are very far apart. Be careful, this will break (ships get lost) when the old pathfinder is used again.
- Feature: Disabling 90 degree turns for trains and ships.
- Requires NPF to be enabled.
- Ships and trains can no longer make weird 90 degree turns on tile borders.
- Codechange: Removed table/directions.h.
- table/directions.h contained ugly static tables but was included more than once. The tables, along with a few new ones are in npf.[ch] now. Better suggestions for a location?
- Fix: Binary heap in queue.c did not allocate enough space, resulting in a segfault.
- Codechange: Rewritten FindFirstBit2x64, added KillFirstBit2x64.
- Codechange: Introduced constant INVALID_TILE, to replace the usage of 0 as an invalid tile. Also replaces TILE_WRAPPED.
- Codechange: Moved TileAddWrap() to map.[ch]
- Add TileIndexDiffCByDir(), TileIndexDiffCByDir().
- Codechange: Moved IsTrainStationTile() to station.h
- Add: IsRoadStationTile() and GetRoadStationDir().
'set rcon_pw <password>'
Which enables rcon. A client can now do:
'rcon <password> "<command>"'
The command will be executed on the server. (guru3)
-Fix: 'kick 1' did crash dedicated servers
-Fix: server password is now correctly saved
!!Warning!!: do not give your rcon password to people you do not thrust!
When enabled, empty companies (companies with no active clients) with no
password are declared bankrupt after 1 year of emptyness.
For empty companies with password, the password is removed after 3 years
of emptyness.
The delay of removing company/password can be configured via:
- 'set autoclean_protected <months>'
- 'set autoclean_unprotected <months>'
to Start Server, you can select by connection: 'Internet (advertise)'.
When selected, the server will announce itself to the server-list at
http://servers.openttd.org (when finished)
If you set autosave_on_exit = true in openttd.cfg, your game will be saved as exit.sav in the autosave folder and you won't be asked if you want to quit the game any more.
The correct default value is 0.0.0.0. If you are experiencing problems with connecting to your server you'll have to change the value of server_bind_ip to 0.0.0.0 in openttd.cfg
It's not FIFO loading, but does the right thing in the common case:
If a vehicle is empty and another vehicle is already loading the same cargo at this station then the vehicle waits.
This is an reworked version of [ 1072211 ] submitted by Hackykid, thanks!
Features:
* network core is dynamicly loaded when needed (-n isn't needed anymore)
for easy switching between single and multiplayer. But commandline
shortcuts are still enabled:
-n = autodetect network server
-n [ip] = connect to the server
* udp now uses 2 different ports
- you can run 1 server and serveral clients on one pc
- the clients udp-socket gets unloaded when the
network game starts
- the servers udp-sockets remains online to allow the
network gui to detect itself
* new gameinfo structure
this struct is available for every online/lan game
* dynamic NetworkGameList
