- filemanagerutil.resetDocumentSettings()'s doc_settings:close() -> doc_settings:flush()
- Remove current_status from filemanagerutil.getStatusButtonsRow() args, get it inside from file
- Move genStatusButton() inside filemanagerutil.getStatusButtonsRow()
- Move "Reset settings" button generation to filemanagerutil
- Rename "Reset settings" button to "Reset" and update popup box text
- Disable "Reset settings" for file if it's currently open in Collections (same as History)
Much easier to deal with thanks to the cleanup work done in #10062 ;).
* `carrier` is set to 1 as soon as the device is *administratively* up (in practice, as soon as we run `ifconfig up`). This is perfectly fine for `isWifiOn`, but absolutely not for `isConnected`, because we are not, actually, connected to *anything*, no attempt at associating has even been made at that point. Besides being semantically wrong, in practice, this will horribly break the connectivity check, because it expects that `isConnected` means we can talk to at least the LAN.
* Delving into the Linux docs reveals that `operstate` looks like a better candidate, as it reflects *operational status*; for Wi-Fi, that means associated and successfully authenticated. That's... closer, but still not it, because we still don't have an IP, so we technically can't talk to anything other than the AP.
* So, I've brought out the big guns (`getifaddrs`), and replicated a bit of code that I already use in the USBNetwork hack on Kindle, to detect whether we actually have an IP assigned. (Other approaches, like `/proc/net/route`, may not be entirely fool-proof, and/or get complicated when IPv6 enters the fray (which it does, on Kobo, Mk. 8+ devices are IPv6-enabled)).
TL;DR: Bunch of C via ffi, and `isConnected` now returns true only when the device is operationally up *and* we have an IP assigned.
Pulls in https://github.com/koreader/koreader-base/pull/1579 & https://github.com/koreader/lj-wpaclient/pull/10
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
Re: https://github.com/koreader/koreader/issues/9806#issuecomment-1416827447
Depends on https://github.com/koreader/koreader-base/pull/1576
Includes assorted cosmetics tweaks related to duplicate `setDirty` calls when instantiating widgets that already have an `onShow` handler doing it. (I left widgets doing it in `update` instead of `init` alone, on the assumption that callers *may* be relying on that behavior when updating widgets at runtime. This might actually never matter, and it certainly didn't for ScreenSaverWidget, which is why I removed it from there ;p).
Use texteditor if available
Auto disable if patches folder doesnt exist
And show a restart message after file edit
Sort menu entries in execution order
Warning sign for failing patches
Use both a whitelist for targeted widget repaints, a blacklist for no repaint at all, and a fallback for a full in-order ReaderUI repaint when unsure.
Use a similar approach in ReaderHeader (i.e., prevent explicit refreshes while ReaderMenu is open).
Re #9979, re #9768
isWifiOn for kindle currently returns if the interface is connected, change this to doing what is says isWifiOn the file is only present if the wireless interface is up.
isConnected pings the gateway, rely on the kernel for a more reliable check.
Whan connecting to my android phone's wifi hotspot to remote debug from my phone, the network is connected yet the phone(gateway) does not respond to pings leading koreader to shut down the connection thinking it is unsuccessful
* Move natural sorting algo to a dedicated sort module to avoid code duplication
* Use a slightly more accurate algorithm, and speed it up by caching intermediary strings
* Calibre: Use natural sorting in metadata search (fix#10009)
Apparently, toggling the rtc interrupt doesn't quite work on some boards? (fix#10031)
(Drive-by tweak to UIManager: Less confusing logging when quit gets tripped both via quit
and _gated_quit (i.e., on poweroff))
Fix#10020, Regression since #10008
(hasMultiTouch is set by `Generic.init`, but we use it before that;
so just set it properly ourselves in our superclass, because we don't
actually need to rely on Generic's autodetection).
non-reflowable documents.
The code only handled setups with "reclaim bar height" enabled (because
that's my usual workflow, har har), but would have broken in various
more or less obvious ways without it, depending on the exact layout/zoom
settings.
The previous attempts at handling the no-reclaim case were focused
on scroll mode, which is a bit of a nightmare. This approach should
deal as well/badly as the previous one in scroll mode, but actually
handle page mode properly ;).
Re #9979
Generic is responsible for setting up the translation via input hooks;
since our own input hooks involve swapping or mirroring X/Y, we need to
run our own hooks *first*, so that the viewport translation actually
does the right thing...
Probably broken for a good long while, I'd just assumed the inaccuracies
on the H2O were due to the IR grid... :/.
Reported @ https://www.mobileread.com/forums/showthread.php?t=351340
Regression since #9902, because I'd forgotten that the default Kobo block *does* set those...
Reported by @ptrm on Gitter, thanks!
Take two, essentially revert 8a16518918
We have defaults for most of those in the Kobo superclass, so these can never really be `nil`.
Abort earlier if the nearest link is too far, instead of computing stuff and creating an object we'll never actually use.
Includes minor logging tweaks to vaguely related codepaths ;p.
Prevent any later hold_release event from being handled
by MovableContainer as a moving touch+hold_release.
This issue was noticable when closing DictQuickLookup
with long-press on close, resulting in the movable
highlight actions ButtonTable moving to where the
long-press happened.
The x and y coordinates of SortItemWidget's checkmark widgets were not updated, thus remained at their initial value 0.
Consequently the intersectWith check in SortItemWidget:onTap always evaluated to false, resulting in taps on checkmarks in the sort widget not being recognized.
Co-authored-by: NiLuJe <ninuje@gmail.com>
If Wi-Fi is restored on resume, going back to suspend while the
screensaver is shown via the screen_saver_lock flag would have attempted
to suspend *without* killing Wi-Fi first.
This implodes on the vast majority of NTX boards, so take the usual
precautions.
Go through a dedicated sticky invisible widget instead of piggybacking
on ScreenSaverWidget, so that we behave if there are other InputContainers
in ScreenSaverWidget, or if there isn't any ScreenSaverWidget at all.
Fix#9911, fix#9955
I'm not *quite* sure what's responsible for inverting the padding
values, since the only Widget I can see doing that is FrameContainer,
and I can't find any in that Widget chain, but, oh, well.
Easily reproducible with the FileManager's TitleBar left/right buttons
(i.e., Home & Plus).
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
- Cleanup search and animation codes, fix inconsistencies
between animation/no-animation opening, and refreshes
glitches on eInk.
- Show menu item on tap, with buttons to either open
directly, or to walk there (removed earlier "Animation"
checkbox, so the choice can be decided later).
- Move event handlers into ReaderMenu/FileManagerMenu.
- Avoid duplicated and confusing results from gestures
and font-family submenus.
Exclude some screensaver option showing book content
(title, page image) when "Exclude this book cover" is checked.
Random image as fallback, KOReader logo as 2nd-order fallback.
Use the same mtime (the newest) for both entries, so that priority order
wins the tie, giving priority to the primary.
Avoids preferring an older legacy sidecar in case of issues with the new
files.
If there are hidden flows, this calculates the current page, total pages, percent, time left in chapter, and time left in the magic variables used in screensaver message only for the current flow. If there are no hidden flows, the behavior is the same as before.
Adjust image colors for PocketBook color devices to supply
brighter image colors. Make it a config option so we can
adjust it to a sensible default for all devices later.
Also enable HW Dithering for color devices: the dithering
flag allows us to figure out if what is viewed is an
image or text. This way we can enable color rendering
or not based on the dithering flag.
Piggybacking on the touch gesture handlers implied that the gesture
filter (tap and/or swipe) was still applied, which made no sense.
Also, stop the weird Event roundtrip for events we're actually the only
ones to handle, just call the handler ourselves directly.
Fix#9792
It possibly historically never made it out of InkView in the past, but
apparently that's no longer the case and/or every other key behaves the
same way anyway, so it's harmless at worst.
Fix#9791
Adds the ability to re-assign which book a word belongs to
and change the name of an existing book. It can be used as
a way to regroup words and hide/show them by book.
Fix regression introduced by 48eb0231#9651: on re-rerendering, the new pages count didn't reach the Statistics plugin.
So, if you change font size or margins, the stats for the page read since then were badly accounted, until a change of book or restart... I noticed that in Book map, strange nobody else did over the last 2.5 weeks.
This commit adds cross-device sync ability for two plugins: reading statistics and vocabulary builder. It relies on user setting up a Cloud server (DropBox and WebDAV but not FTP though) and designating a path. Behind the curtains sqlite databases are being passed around and updated.
UI-wise, for the statistics plugin, two new menu items Synchronize now and Cloud sync to set it up (might not be the best wording) are added. As for vocabulary builder, a similar Cloud sync button is added to the menu and a shortcut icon button to Synchronize now is pinned at the bottom corner.
CloudStorage new features: WebDAV creating folders and uploading files. And a new widget-like sync server chooser. In the end I decided not to add automatic sync, as the SQL commands part seem a bit much.
This is made easier by the fact that only a single method in a single
widget actually handles Gesture, and that we barely ever overload it.
So, apply a bit of monkey-patching trickery to handle the magic :).
Fix#9695
Tools and humans alike are confused by leaving it empty. It should be inoffensive to resolve the problem this by having an unused singular. Doing anything else would make it so we couldn't have the correct plurals in Slovak, among others.
Follow-up to https://github.com/koreader/koreader/pull/9726
None[1] of them actually rely on their own onGesture handler, they
all register their own stuff to ReaderUI's.
Hotfix #9710 revealed that the way this was handled didn't exactly
work as expected ;).
The only thing that consumes ges_events is InputContainer's onGesture
method. All these modules *extend* InputContainer, but none of them
*implement* a custom onGesture, so self.onGesture = nil was just a NOP,
they always access InputContainer's method via inheritance.
If we actively want to neuter it, we *have* to implement it in that
module (with a NOP).
[1] The exception being ReaderZooming, but that only when in flip mode.
Should fix https://github.com/koreader/koreader/discussions/9719
Regression introduced in https://github.com/koreader/koreader/pull/9682 by my fault.
See the xgettext error message:
```
frontend/dispatcher.lua:573: warning: Empty msgid. It is reserved by GNU gettext:
gettext("") returns the header entry with
meta information, not the empty string.
xgettext: warning: msgid '' is used without plural and with plural.
xgettext.c:1975: Here is the occurrence without plural.
frontend/dispatcher.lua:573: Here is the occurrence with plural.
Workaround: If the msgid is a sentence, change the wording of the sentence; otherwise, use contexts for disambiguation.
```
Co-authored-by: Frans de Jonge <frans@clevercast.com>
defaults.persistent.lua
We were pcall'ing the parsing, but not the execution...
The funky Lua syntax quirks means that it is possible to pass the former
but not the latter ;).
Fix#9700, de-facto regression since #9546
(This involves moving it to the instance object to avoid inheritance).
Pocketbook: Disable rotation_map on the Era (fix#9556)
It would appear that InkView handles the translation for us, now...
Get rid of the doc & seqtext fields, as they are not actually used (nor
are they particularly useful, the event handler's name should be pretty
self-explanatory).
Also, tweak the key_events documentation to highlight the quirks of the
API, especially as far as array nesting is involved...
Random drive-by cleanup of the declarations of key_events & ges_events
to re-use the existing instance object (now that we know they're sane
;p) for tables with a single member (less GC pressure).
* Added a new plugin external-keyboard. It listens to USB events. When keyboard is plugged in or plugged out, it updates device and input configuration accordingly.
* Added new fake events UsbDevicePlugIn and UsbDevicePlugOut that are emitted when a device is connected to a book reader that plays the role of USB host. The usage of the existing events UsbPlugIn and UsbPlugOut has not changed - they are used when a reader is connected to a host. The koreader-base has a related PR for those events.
* Did a small refactoring of initialization for the modules FocusManager and InputText. They check device keyboard capabilities on their when the module is first loaded and store it. Some of the initialization code has been extracted into functions, so that we can re-initialize them when keyboard is (dis)connected.
* Initial implementation centered around text input, and tested with USB keyboards on devices with OTG support.
* Said OTG shenanigans are so far supported on devices with debugfs & the chipidea driver, or sunxi devices.
When a gesture/profile was updating multiple cre settings,
each setting handler would emit UpdatePos which each would
force a re-rendering.
When this might be happening, postpone the rerendering
until all are set.
Needs some bit of refactoring to the events at play:
introduce "DocumentRerendered" event, and use it where
we used "UpdatePos" or "UpdateToc" to mean exactly that.
If you've ever enabled the main loop debugging, you'll know that
actually dumping the full window stack was *hilarious*.
Just print table counts, it's often good enough to debug what's
happening in the exceedingly rare cases you need this ;).
Also, it'll actually be readable, unlike the previous insanity ^^.
This PR makes zh_keyboard's number pad symbol mode instead of shift mode, so that numbers are shown when the keyboard is called expecting numeral input.
* Iterate over varargs directly via select if possible
* Use table.pack otherwise (https://github.com/koreader/koreader-base/pull/1535).
* This allows us to simplify a few Logger calls, as logger now handles nil values.
This PR adds support for a Thai keyboard. Layout mostly copied from my phone, with difference in diacritics placements: phone has only one key for all of them, while here we have a couple more. Swipe in different directions needed for inputing them.
The ultimate goal is for toast widgets (i.e., Notification when flagged as such) to:
* Not stop event propagation
* Close themselves when the event was emitted by user input.
Instead of doing event filtering in UIManager, we simply overload the onGesture & onKey* handlers in Notification to do just that, and just make sure UIManager will *send* those events to toasts, but without affecting the usual semantics of top widget selection and event propagation (which is as simple as just calling handleEvent on them unchecked ;p).
Thanks to @poire-z for the brainstorming in https://github.com/koreader/koreader/issues/9594 ;).
This also happens to fix a bug in which we might have looped on the top widget twice, because of an array vs. hash mishap ;).
The candidates array had a very very very high chance of being sparse, which effectively broke the logic.
It was mostly harmless since said logic is only here for a long and varied history of backwards compatibility ;).
specifically requested.
Using a custom message would effectively prevent the event message from
showing up, which is... bad.
(In fact, I'm half of the mind to get rid of the option to hide the
event messages, because it's a goddamned terrible idea).
Also, make sure references are actually dropped,
no matter how the widget is closed, by relying on onCloseWidget ;).
Enable the "long-press-on-close" trick on the actual Close button,
too, instead of only on the title bar's cross.
Fix: https://github.com/koreader/koreader/pull/9586#issuecomment-1272332275
This should be fairly unintrusive, but still noticeable enough without having to watch the battery gauge like a hawk, or resort to actual monitoring via kernel logs and/or usb meter and/or multimeter...
* Persist: support serpent, and use by default over dump (as we assume consistency > readability in Persist).
* Logger/Dbg: Use serpent instead of dump to dump tables (it's slightly more compact, honors __tostring, and will tag tables with their ref, which can come in handy when debugging).
* Dbg: Don't duplicate Logger's log function, just use it directly.
* Fontlist/ConfigDialog: Use serpent for the debug dump.
* Call `os.setlocale(C, "numeric")` on startup instead of peppering it around dump calls. It's process-wide, so it didn't make much sense.
* Trapper: Use LuaJIT's serde facilities instead of dump. They're more reliable in the face of funky input, much faster, and in this case, the data never makes it to human eyes, so a human-readable format didn't gain us anything.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
And do so only for the active layouts.
This prevents loading a potentially large amount of data without even having navigated to said menu (or having the layout enabled).
Allow associating a font to each of the generic
font-family names.
Bump crengine:
- CSS parsing: accept (and ignore) namesspaces
- isImage(): more checks for <object> as it can have inner content
- getFontFileNameAndFaceIndex(): returns if font has math support
- getFontFileNameAndFaceIndex(): returns if font has emojis
- CSS/Fonts: add support for font-family to font name mapping
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
* Handle the power button input device
* Handle the charging LED properly
* Handle the new Wi-Fi chip properly
* Handle frontlight warmth adjustments
* Handle the battery gauge properly
* Bump base (a lot of third-party updates) [https://github.com/koreader/koreader-base/pull/1523]
* Bump android-luajit-launcher to match the LuaJIT update [https://github.com/koreader/android-luajit-launcher/pull/386]
Fix#9552 (many thanks to @Bartvelp for bearing with my stupid tests ;)).
* This removes support for the following deprecated constants: `DTAP_ZONE_FLIPPING`, `DTAP_ZONE_BOOKMARK`, `DCREREADER_CONFIG_DEFAULT_FONT_GAMMA`
* The "Advanced settings" panel now highlights modified values in bold (think about:config in Firefox ;)).
* LuaData: Isolate global table lookup shenanigans, and fix a few issues in unused-in-prod codepaths.
* CodeStyle: Require module locals for Lua/C modules, too.
* ScreenSaver: Actually garbage collect our widget on close (ScreenSaver itself is not an instantiated object).
* DateTimeWidget: Code cleanups to ensure child widgets can be GC'ed.
* ImageViewer: Minor code cleanups
* GestureDetector: Fix the `distance` field of `two_finger_pan` & `two_finger_swipe` gestures so that it's no longer the double of the actual distance traveled. Get rid of existing workarounds throughout the codebase that had to deal with this quirk.
Should avoid egregious values that would potentially alloc insanely large buffers (and likely fail to do so).
In the process, tweak the scale_factor computations when zooming so as to produce slightly less annoying behavior.
Since I never actually needed to look into that data ever until today, let's just get rid of the weird debug-specific behavior.
Instead, just add a dedicated "Developer options" entry that will dump it on demand (and it'll be sorted to boot, which makes it 500% more usable).
Plus, since yesterday's change, the cache format switch between debug or not miiiight actually be crashy, so re-trigger the migration ;p.
* Includes a couple of noteworthy base bumps:
https://github.com/koreader/koreader-base/pull/1516 (update to sdcv 0.5.4 + fixes pending upstream)
https://github.com/koreader/koreader-base/pull/1517 (fix ffiUtil.orderedPairs with keys of mixed types)
* Android: Make sure sdcv can find the STL
* DocCache: Be less greedy when serializing to disk, and only do that for the *current* document ;).
* CanvasContext: Explicitly document API quirks.
* Fontlist: Switch the on-disk Persist format to zstd (it's ever so slightly faster).
* Bump base for https://github.com/koreader/koreader-base/pull/1515 (fix#9506)
Mostly only used when rendering cover and wikipedia images.
Our SVG icons are still rendered with renderSVGImageFile()
and libkoreader-nnsvg.so (NanoSVG).
Get a Lua userdata wrapping a crengine LVSvgImageSource object
when long-press on a SVG image, and have crengine/LunaSVG render
it smoothly scaled to the requested size by ImageViewer.
Build crengine against LunaSVG instead of NanoSVG.
Includes:
- SerialBuf: allow serializing longer strings
- Support '<img src="data:image/svg+xml,<svg...', remove ;-cr-plain,
- CSS: attribute selectors: accept ' or " as the quote char
- Embedded fonts: fix ignored name when sharing same url
- LVImg: fix possible crash on GIF images
- Fonts: DrawTextString(): allow collecting glyphs as SVG paths
- Images parsing: cache native sizes
- SVG: enhanced SVG support with LunaSVG extended
- Add ldomNode::isImage(), handle <object> and <embed> as images
- Handle the <svg> element as an SVG image
- Support SVG images as first class documents
Make credocument the preferred engine for .svg files.
* Kobo: Make sure checkUnexpectedWakeup won't run between scheduled
suspend calls
Because of the suspend_wait_timeout, a previously scheduled check *could* shortcircuit a suspend scheduled a tiny bit later by a real Power event.
This led to fun breakage when you plugged/unplugged a "sleeping" device, for instance.
Fix#9457
* And clear up the unexpected_wakeup_count semantics
Bits of an older design seeped through and were causing weird corner-cases...
* Kobo: Discriminate between the Touch A/B and the Touch C properly, and implement actual support for the A/B input quirks. This means the clunky touchscreen probe widget shown on fresh installs on those devices is now gone :}.
* Input: Fix an off-by-one in most adjustTouchMirrorX/Y callers (only rM was doing it right), and adjust their documentation to avoid similar mistakes in the future.
* GestureDetector: Unify logging to always display transformed coordinates for simple gestures.
* GestureDetector: Fix two-contact hold lifts to be computed at the midpoint between the two contacts, like their holds counterpart already did.
* Kobo: Switch ST devices to a dedicated input handler
Instead of shoehorning a hack into the standard handler.
* Use setCurrentMtSlotChecked in handleTouchEvLegacy
slots
This ensures we won't leave *any* slot in an undefined state because
we skipped parsing 'em because what we consumed first yielded a
gesture.
(In particular, this could leave a few slots dangling in the "hold"
state in corner cases involving spider-hand finger tapping ;p).
Cleans up the slot state clearing in GestureDetector to only clear the
necessary slots (e.g., two-finger gestures now only clear their own two
slots; and holds only clear their own slot).
The fact that every slot will be consumed ensures that every slot will
naturally get their contact up handled, which wasn't the case before,
hence those crappy workarounds.
As far as timerfd callbacks are concerned, this *does* introduce the
possibility of deadline collisions, so, do reimplement minimal safety
checks to ensure we run (and free) the right timerfd callback.
Some drivers can bundle the same slot multiple times in the same input
frame. We were only correctly coalescing *consecutive* slots, but some
drivers can do that in non-consecutive sequences (e.g., 1a -> 2a -> 1b
-> 2b), so, handle that, too.
Seen on neonode v2 grids.
Make sure we always create the storage table when we add its reference
to the MTSlots list instead.
(The reasoning being we only add the reference once, and it's the first
thing we do, and we kinda need the storage to be created to get its
reference anyway; while we may set multiple keys per frame).
For realz, this time.
This reverts the original attempt, because it was gratuitous
overcomplexification that turns out to be completely unnecessary.
This also fixes a few subtle MT handling snafus on some devices.
We'll only honor one (the last one) anyway, and we've already cleared
the timers, so the others are essentially lost and stuck in limbo.
(Repro: do a series of staggered holds on different words with different
fingers in a CRe document; the one that'll "take" is the last one,
but *every* slot will be stuck in a hold state, which can essentially
semi lock you into broken input until you manage to clear the right
slots by doing duplicate multi-slot holds again...).
Multitouch gestures can create multiple timers on the same deadline, but
on different slots, so simply hoping that the head of the list would
match was somewhat optimistic... ;o).
Fix#9376
It's trickier in the !timerfd case, though,
so do the best we can there...
(It wouldn't crash, but it might fire the "wrong" callback).
It is used by CoverBrowser, in a subprocess, when extracting
metadata from PicDocuments, and crash on Android as calling
android methods is only allowed from the main thread.
This helps jumping to page when ToC chapters are short
and the bookmap page rows narrow.
Also fix crash when invoking BookMap and PageBrowser
on a PicDocument (considered DocLess by Statistics).
Includes:
- Text: fix possible overflow with "white-space: pre"
- Fonts: getFontFileNameAndFaceIndex(): return family type
- Fonts: account for _bias in Font hash
- epub.css, fb2.css: remove hardcoded monospace font names
- Fonts: allow scaling monospace fonts
- Fonts: allow adjusting fallback font sizes to x-height
- HTML parser: trust xml encoding before html charset
In our list of fonts, show a "M" indicator alongside
monospace fonts, and allow long-press to select the one
to be use for "font-family: monospace".
Add 2 options to Font settings, to scale monospace fonts
by a percentage, and to adjust fallback fonts to their
x-height.
In some versions of the /ebrmain/config/extensions.cfg file there is a
comment #ebrcfg. This will not match the regex and crashes koreader as
the table is empty.
Add a check to ensure the table is not empty while reading extensions
from the default file.
This is useful for the sysstat plugin not to have 00:00 for suspend time :)
Something similar should probably be done for the other canSuspend platforms.
This is mostly needed because opening the menu with swipe
is actually done by handling a pan south event, and so the
final swipe event is another event, that is then handled
by TouchMenu, which would straight away close itself.
Disable redundant or incompatible tweaks when enabling some.
This makes the menu more dynamic to show what's impacted,
save some re-renderings, and may avoid the user trying
combinations that would have no effect.
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
Schedule wifi keep-alive on wifi start but do not reschedule when
connection is lost. This will make sure this code is not run when
wifi is disabled again saving some battery and cpu cycles.
Commonize fullscreen code across different devices.
Add fullscreen toggle on SDL desktop targets.
Expose the toggle to the dispatcher and map it to F11.
Hide touchmenu when resizing.
(In which case we return a checkerboard pattern).
ScreenSaver: Make sure the choose image/folder/document settings
report what the code actually does on empty settings...
Add a copy button and save word context (off by default), shown
via the three-dot menu of word entries.
Also some db refactoring and minor UI improvements:
- a dedicated book title table in order to shrink db size by storing
references to title names instead of repeated actual strings,
- alignment of different forms of the "more" button and possible
clipped words in translations.
- fix plugin name so it can be disabled
This was originally designed for finer-grainbed control (specifically,
to correct by the amount of time spent in standby), but the final fix
only ever sets this to 0.
Simplify and rename (consumeInputEarlyAfterPM) to avoid useless computations.
Have the enabled/disabled state of the toggle show the
presence or not of embedded fonts in the current book.
Also show the names of the embedded fonts in the
help_text InfoMessage.
When selected text seems to be a "sentence segment"
(that is, when there are punctuations around start
AND end), extend the selection to include the relevant
punctuation.
Do this only when saving highlights and for translation
(but not when dict or wikipedia lookups, or search).
Includes:
- lvtext: fix m_kerning_mode type
- XML: let 'gb2312' (Chinese) encoding be known
- Add ldomXPointer::getChar()
- LVDocView::getNodeByPoint(): tweak for text selection
- Fonts: allow fetching the list of embedded fonts
cre.cpp:
- getTextFromPositions(): use getNodeByPoint(forTextSelection=true)
to allow panning in margins and get the nearest text instead
of nothing.
- add extendXPointersToSentenceSegment() to allow extending some
xpointer range to include punctuations at start or end (with
for now a quite rudimentory implementation).
- add getEmbeddedFontList() to allow fetching the list of
embedded fonts in the current EPUB book.
The setting is handled like all other bottom menu options
but, as it's really not useful and its target audience is
very limited, make it not shown in the bottom menu, but
available via another button in the (also quite not useful)
Word Expansion fine tuning widget.
* GestureDetector: Downgrade probeClockSource log messages to debug
We're seeing a bit more of 'em between autostandby and inhibitInput now,
and the whole thing was implemented long enough ago that it's no longer
critical to see this in random non-debug logs ;).
* Input: Reset gesture state in inhibitInput
Should prevent bogus gestures when re-enabling the handlers if we were
called in the middle of gesture detection.
Long story short: the LeaveStandby event is sent via `tickAfterNext`, so if we tear down the plugin right after calling it (in this case, that means that the very input event that wakes the device up from suspend is one that kills ReaderUI or FileManager), what's in UIManager's task queue isn't the actual function, but the anonymous nextTick wrapper constructed by `tickAfterNext` (c.f.,
https://github.com/koreader/koreader/issues/9112#issuecomment-1133999385).
Tweak `UIManager:tickAfterNext` to return a reference to said wrapper, so that we can store it and unschedule that one, too, in `AutoSuspend:onCloseWidget`.
Fix#9112 (many thanks to [@boredhominid](https://github.com/boredhominid) for his help in finding a repro for this ;)).
Re: #8638, as the extra debugging facilities (i.e., ebb81b9845) added during testing might help pinpoint the root issue for that one, too.
Also includes a minor simplification to `UIManager:_checkTasks`, and various other task queue related codepaths (e.g., `WakeupMgr`) ;).
The change from timeval to time completely broke reMarkable.
frontend/device/remarkable/device.lua was using TimeVal:now() to manually overwrite event time values, as noted in the code comments.
Input:handleTouchEv is expecting those event time values to be timevals, not integer times.
So as soon as the user touches the screen, crash.
Titlebar button navigation in menu, including ListMenu and MosaicMenu in FileManager, History, Favourites and Shortcuts.
Hide show password checkbox in non-touch devices
Rationale from: https://github.com/koreader/koreader/pull/9064#issuecomment-1116485065
>While we are dealing with WiFi, a slight hijack, on my kindle when the WiFi is on but not connected the ToggleWiFi gesture tries to connect so i have no way of turning it off. For eample I use the gesture to turn it on, then leave the range I can't use it to turn off. I think the more direct approach would be to toggle On -> Off states so if i am disconnected and want to reconnect i can always go Off then On, but I am able to turn it off.
>TLDR: the tooglewifi gesture should check for iswififup not isconnected
* Disable all non power management related input during suspend. (This prevents wonky touch events from being tripped when closing a sleep cover on an already-in-suspend device, among other things).
* Kobo: Use our WakeupMgr instance, not the class.
* WakupMgr: split `removeTask` in two:
* `removeTask`, which *only* takes a queue index as input, and only removes a single task. Greatly simplifies the function (i.e., it's just a `table.remove`).
* `removeTasks`, which takes an epoch or a cb ref, and removes *every* task that matches.
* Both of these will also *always* re-schedule the next task (if any) on exit, since we can have multiple WakeupMgr tasks queued, but we can only have a single RTC wake alarm set ;).
* `wakeupAction` now takes a `proximity` argument, which it passes on to its `validateWakeupAlarmByProximity` call, allowing call sites to avoir having to duplicate that call themselves when they want to use a custom proximity window.
* `wakeupAction` now re-schedules the next task (if any) on exit.
* Simplify `Kobo:checkUnexpectedWakeup`, by removing the duplicate `WakerupMgr:validateWakeupAlarmByProximity` call, now that we can pass a proximity window to `WakeuoMgr:wakeupAction`.
* The various network activity timeouts are now halved when autostandby is enabled.
* Autostandby: get rid of the dummy deadline_guard task, as it's no longer necessary since #9009.
* UIManager: The previous change allows us to simplify `getNextTaskTimes` into a simpler `getNextTaskTime` variant, getting rid of a table & a loop.
* ReaderFooter & ReaderHeader: Make sure we only perform a single refresh when exiting standby.
* Kobo: Rewrite sysfs writes to use ANSI C via FFI instead of stdio via Lua, as it obscured some common error cases (e.g., EBUSY on /sys/power/state).
* Kobo: Simplify `suspend`, now that we have sane error handling in sysfs writes.
* Kobo.powerd: Change `isCharging` & `isAuxCharging` behavior to match the behavior of the NTX ioctl (i.e., Charging == Plugged-in). This has the added benefit of making the AutoSuspend checks behave sensibly in the "fully-charged but still plugged in" scenario (because being plugged in is enough to break PM on `!canPowerSaveWhileCharging` devices).
* AutoSuspend: Disable our `AllowStandby` handler when auto standby is disabled, so as to not interfere with other modules using `UIManager:allowStandby` (fix#9038).
* PowerD: Allow platforms to implement `isCharged`, indicating that the battery is full while still plugged in to a power source (battery icon becomes a power plug icon).
* Kobo.powerd: Implement `isCharged`, and kill charging LEDs once battery is full.
* Kindle.powerd: Implement `isCharged` on post-Wario devices. (`isCharging` is still true in that state, as it ought to).
* Make sure AutoStandby cohabitates nicely with AutoSuspend (regression since #8985), specifically:
* Disable standby during suspend.
* Ensure that leaving standby restores the scheduled suspend properly, with the appropriate remaining amount of time based on the last user input.
* Handle devices with an auxiliary battery better when scheduling suspend (assume it's only charging when the aux battery is charging, not the ereader's).
* Tweak debug logging to be able to remote debug corner-cases more easily without requiring code changes.
* Fix erroneous behavior when awoken from standby by something that doesn't trigger an InputEvent Event (e.g., rtc alarm, gyro, or random bullshit).
Don't pass a non-window-level widget.
Painting is handled explicitly via widgetRepaint, so passing a widget to setDirty was just plain wrong anyway ;).
Specifically, don't forcibly unschedule/schedule on every input event, instead, let the scheduled task figure out if the deadline came to pass or not ;).
c.f., https://github.com/koreader/koreader/pull/8970#issuecomment-1092775830
Besides getting rid of some overhead, this allows proper scheduling after a task that would have blocked for longer than the standby timeout.
Instead of UIManager possibly staled _now, which could have
no effect after a long ReaderRolling re-rendering.
Also lower the delay after such ReaderRolling re-rendering,
so we can change settings quicker when comparing renderings.
* Handle said rotation shenanigans inside ScreenSaver & ScreenSaverWidget, which allows a more targeted approach; and prevents said rotation from affecting other widgets. (Also, gets rid of duplicated code).
* Handle the corner-case or exiting early from a "keep on screen for n sec" screensaver better, by unscheduling the extra refresh, since an early tap took care of that already.
Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* Ignore hardware sleep button
When running KOReader with a launcher, having the power button trigger the Power event conflicts with the launcher's built-in screensaver (see https://github.com/koreader/koreader/issues/8891). This commit ignores the hardware power button in KOReader and lets the launcher handle sleep and wake normally.
* Disable autosuspend
If a launcher is active, there will be no way to un-suspend because the power button is ignored by KOReader and handled by the launcher.
* Ignore power button only if Oxide is running
Same with disabling auto suspend
* Only toggle nightmode via the grayscale fb info flag on Kindle
Most NTX boards require elaborate trickery (see fbdepth) to actually
send a vput ioctl without the driver screwing with the rotation behind
your back.
This was causing spurious hardware rotations on exit on most Kobo
devices, something which might have gone mostly unnoticed, as current
Nickel versions will sanitize it on startup.
A simple repro was instead to start an USBMS session, as that exits
KOReader and restarts it without going through fbdepth again ;).
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
readerhighlight: non-touch support
focusmanager: fix same type container share same selected field
radiobuttonwidget: non touch support
sortwidget: non touch support
openwithdialog: fix layout contains textinput, checkboxes added to layout twice
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
Function `SetSubtaskInfo` takes only chars as a valid book. Since
filename can be `nil` (not a char) the crash would happen. This
Change avoids the crash by using a char type nil value. See:
`int SetSubtaskInfo(int task, int subtask, const char *name, const char *book);`
Fixes#8053Fixes#8392 too
Fixes#8743 last issue
With the inkview library inverting the screen seems possible but needs some
discussion with the developers of Pocketbook. For now disable HWInvert so
this feature is not broken while we figure out how to change the invert with inkview.
(1) ButtonDialogTitle: new method setTitle()
(2) OPDSbrowser
-use setTitle() instead of open/close ButtonDialogTitle (no visual changes to the download dialog)
-reduce logger.info output to avoid flooding crash.log
(3) CloudStorage
-enhance download dialog (similar to OPDS), much optimized code of downloadFile
-fix a bug: cannot create new folder or upload files to the root of the Dropbox storage
Make it a real Document property, updated at init & toggle time.
Also, simplify a bunch of redundant nested lookups in ReaderView
(self.ui.view is self, self.ui.document is self.document).
Temporary (?) workaround for the Libra 2 EPDC race issues,
since we haven't really found any better solution,
and so far, newer kernels haven't really helped...
Re #8414
Instead of using the depth configured in Book map, start
with max depth, and allow decreasing (and reseting when
at 0) with long-press on the (i) top left icon.
widget
Since we only use a single icon, we have to take a few shortcuts:
* The icon itself is computed based on the average of both batteries.
* The actual value is the sum of both batteries.
* Much like everywhere else, charging means the *aux* battery charging
(i.e., connected to a power source).
Re #8741, which does the same for ReaderHeader.
This change drops the #koreader signature check.
This check prevents KOReader from modifying associations if something else has changed the file without putting a verbatim "#koreader" string back.
While this prevents KOReader from interfering with another application or the system trying to own the file, it also leads to hard to diagnose issues, when the user can inadvertently change associations without realising they’re doing so, and being unable to return back.
I've emailed with PocketBook about the problem with Wifi on the newer models. They explained the wrong constant was being used:
> Dear Robert,
>
> Thank you for choosing Pocketbook.
> Wi-Fi Connection" enabled when no connection:
> https://github.com/koreader/koreader/issues/8617
> The problem is in incorrect usage of constant. You should use flag NET_CONNECTED with bit AND operation as shown in example below.
>
> function NetworkMgr:isWifiOn()
> local state = inkview.QueryNetwork()
> return band(state, C.NET_CONNECTED) ~= 0
> end
>
> Inkpad3 Wifi Standby
> https://github.com/koreader/koreader/issues/4747
> the same solution for this issue
Related issues:
https://github.com/koreader/koreader/issues/8617https://github.com/koreader/koreader/issues/4747
Since I made the previous hack and their suggestion seems to work on the PB741 color. I've made this PR to remove my hack.
It might be wise to also test this fix on older models.
- New button Go to bookmark in Bookmark details dialog.
- New button Latest bookmark in the popup menu.
- Empty input box for new note, new button Paste to
paste highlighted text (auto-text).
- Allow duplicated bookmarks to avoid orphaned highlights.
- TextBoxWidget: fix enabled up-arrow on empty box in InputDialog.
New real terminal emulator, replacing the old plugin.
The emulator is basically a vt52 terminal (enriched with
some ANSI-sequences, as ash, vi and mksh don't behave well
on a vt52 term).
So far working: ash, mksh, bash, nano, vi, busybox, watch...
The input supports: tab-completion; cursor movement;
backspace; start of line, end of line (long press);
page up, page down (long press).
User scripts may be placed in the koterm.koplugin/scripts/
folder, aliases can be put in the file aliases and startup
command in the file profile.user in that folder.
- Add new strikeout highlight style.
- Fix highlight style in pdf documents (save_document enabled)
not updated when KOReader highlight style changed.
- Fix ugly combination of mupdf and KOReader highlights
For consistency with BookMap and PageBrowser widgets
where swipe south (the usual gesture to quick close)
can't be used for closing and we had to use any
multiswipe instead, allow any multiswipe to close
these other fullscreen widgets too:
Menu (ToC, Bookmarks), KeyValuePage, ImageViewer,
BookStatusWidget, ReaderProgress, CalendarView.
- FocusManager: allow managing sub widgets by merging their
"layout" in the main one; make "press" support simpler by
handling it as a fake tap event at the center of the
focused widget.
- Setup gestures on non-touch devices for new focus manager.
- ToggleSwitch: use child layout.
- ButtonProgressWidget: use child layout.
- SpinWidget and DoubleSpinWidget: add keyboard navigation.
Add a submenu allowing users to add Noto Sans fonts
to be used as UI fallback fonts.
Lots of them are alrady there on Android, but can be
downloaded (manually) and side-loaded by the user
on other platforms.
EPUB: have pages with footnotes marked as non-linear
so they can be hidden with "Hide non-linear flows".
In-page footnotes: keep the footnote number near the
left margin (a recent crengine renders them near the
text by default).
## Background
`pathchooser.lua` does not support non-touch device to choose file or folder due to those device cannot generate long press event.
## Choose File
Non-touch device can select file in list, it is good enough to choose file without long press to confirm.
## Choose Folder
`pathchooser.lua` changes the label of current directory `.` to `Long-press to choose a folder`. It is user friendly, while for non-device, it is a very good place to let user tell the system I want the current folder to be chosen without extra long press.
* The first few capacity reads after connecting to the cover may fail
* The PowerCover may trigger spurious move/add usb_plug uevent,
which translate into Charging events for us.
Instead of blindly lighting up the charging LED on those,
check if the device is actually charging, first.
Avoids requring Device direction in Document.
The method needs complete access to the Device object, though, so it's
just another layer of indirection, with an extra reference on the Device
object stashed in CanvasContext...
(much like it already does for Screen)
Implement it on the Kobo Sage, for the PowerCover
TouchMenu: Display auxiliary battery status
Kobo: More accurately report the PowerCover's charging status
i.e., try to actually figure out if the auxiliary battery is charging
instead of just checking the reader's battery (because that one will
often swap between the charging and discharging state as it drains the
aux battery...).
PowerD: Use a cached timestamp when doing battery pull checks
Fix various issues with stacked Wikipedia lookup results,
and follow up lookups when invoked from Wikipedia lookup
history (where going to a search for language LL would
not use language LL when hitting "Full wikipedia").
Fix very-long-press in DictQuickLookup that should allow
doing the query to the other domain (dict/wiki) instead
of the current one.
Similar to 7dea979.
Fixes#4747.
Apparently, inkview.NetConnect() doesn’t enable the Wi-Fi on its own,
this results in a failure if the device has been put into the sleep or
standby mode, when the Wi-Fi hardware is powered down.
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
