-Indentation
-Whitespace
-DeMorgan's Law
-Test with NULL or 0 for non-booleans
-'\0' instead of 0 for chars
-Remove redundantly redundant comments (like DoFoo(); // Do foo)
-Join multiple short lines with a single statement
-Split single lines with multiple statements
-Avoid assignments in if
-Trains will now remember the length of stations it visits and sell cars
when being autoreplaced if they became too long
-If it needs to remove cars, then it starts from the front and sells
all it can find until the train is short enough
-This only works for trains, that knows the station length of the route
so a full uninterrupted run is needed
-a train needs 1-2 runs to detect if the shortest station is expanded
-This feature can be turned on and off in the train replace window
and each company can have it's own setting
-NOTE: minor savegame version bump
This increases the speed greatly when allocating more than one at a time
(planes, artic engines, cloning...) and when adding another block of
vehicles to the vehicle pool (adding 512 vehicles each time)
Now it gives "too many vehicles" error message instead
To make this work, AllocateVehicles() needed to be moved to vehicle.c (from aircraft_cmd.c) and made non-static
this assert could be reached by clicking on the goto depot button to cancel goto depot from the orders and the vehicle
still entered the depot. The flags in that case would not be "normal" anymore. An additional check is added to prevent this
currently this applies to planes and multiheaded train engines (no more lost airmail)
added GetNextEnginePart() that returns the next vehicle in an engine nomatter what type it is
when more types of multivehicle engines are added, they will have to be added here too or autoreplace will not remove all cargo
this would result in the construction of a new vehicle while the old one just continued
added an assert to make sure it's always stopped before trying to sell the old vehicle
running MaybeReplaceVehicle() is now delayed until after the loop in CallVehicleTicks()
This avoids selling the vehicle the loop currently works with (and continues to work with afterwards)
this var works like _new_train_id and the rest of that kind of vars, except it is set each time a vehicle is build, nomatter what type
this is a nice tool to code vehicle independent code, which in turn can reduce code duplication
Right now it's used in ReplaceVehicle() and CmdCloneVehicle()
This makes GetSpriteDimension() superflous, because now it's just a thin wrapper around GetSprite() returning only part of the information, therefore remove it too
-This means that one company can only have one setting for renew and replacing
more clients will not fight due to different settings anymore
-This is a needed step in the line to fix autoreplacing dualheaded locomotives
NOTE: savegame revision bump (peter1138 + me in coop)
-This allows a player to clone an excisting vehicle of his own
-[fix]: this uncovered an excisting bug in CmdBuildRailVehicle() where depots could build trains of the wrong track type. This is fixed
-Thanks to Celestar for drawing the sprites and _luca_ for including them in openttd.grf
- Feature: [pbs] Implement autoplacement of pbs blocks, when a block has an entry and an exit pbs signal, covert the entire block to pbs. Can be turned off in the patch settings.
- Feature: [pbs] Allow showing of reserved status by making the tracks darker, when the pbs debug level is at least 1.
- Codechange: [NPF] Check the railtype along a route against the engine type instead of against the previouse tile. This clears the way for electriefied rails.
- Add: [NPF] [ 1209644 ] A penalty for crossings (peter1138)
* Codechange: Made npf.c use some map array accessing wrappers instead of direct access.
* Codechange/Fix: Named every enum in tile.h. Fixes a nasty bug on MSVC where arrays would be initialised with zeroes (tnx Asterix_)
* Removed magic numbers from tables in tile.c.
* Added some explicit casts in tile.h.
* Add: rail.[ch] for rail-related enums and wrapper functions.
* Codechange: Removed dozens of magic numbers with below enums.
* Codechange: Rewrote CheckTrackCombination().
* Add: TILE_SIZE, TILE_PIXELS and TILE_HEIGHT constants.
* Add: enums RailTileType, RailTileSubtype, SignalType to mask against the map arrays.
* Add: enums Track, TrackBits, Trackdir, TrackdirBits for railway track data. (Note that the old RAIL_BIT constants are replaced by TRACK_BIT ones).
* Add: enums Direction and DiagDirection
* Codechange: Moved a bunch of track(dir) related lookup arrays from npf.[ch] to rail.[ch].
* Codechange: move RailType enum from tile.h to rail.h.
* Add: Wrapper functions for masking signal status in the map arrays: SignalAlongTrackdir, SignalAgainstTrackdir and SignalOnTrack.
* Add: Wrapper functions to access rail tiles, using above enums
* Add: Wrapper functions to modify tracks, trackdirs, directions, etc.
* Add: Wrapper functions for all lookup arrays in rail.[ch] (Arrays are still used in parts of the code)
* Codechange: Renamed some variables and arguments to better represent what they contain (railbit -> track, bits -> trackdirbits, etc.).
* Codechange: Don't use FindLandscapeHeight() in CmdRemoveSingleRail(), since it returns way too much info. Use GetTileSlope() instead.
* Codechange: [NPF] Removed some unused globals and code from npf.c.
- Fix: Also recalculate the train cache values for 'wagon chains' (in the depot without an engine), to avoid possible desyncs later.
- Fix: Make CmdMoveRailVehicle update the caches of the correct trains in all cases.
- CodeChange: remove cmd-misuses CmdStartScenario() and CmdDestroyCompanyHQ()
- Fix (invisible): when parameter checking CmdRestoreOrderIndex() the vehicle did not have its orders yet, so it would fail. So move doing this until AFTER the orders have been added back in RestoreVehicleOrders()
- CodeChange: since only the server will be able to modify difficulty settings, leave the checking of correct values besides, and trust users will join legit servers.
- CodeChange: for renaming signs, only check if GetDParam(); eg _decode_parameters is empty ('\0') or not, instead of the extra check of players, etc. That basically does the same thing. Also dirty sign two times when renaming, once before, once after the action. Because if the name becomes shorter and you update only after, garbage remains on the screen.
- CodeChange: made GetMaskOfTownActions() available to the town-cmd to double-check if the action was available to the player. For this purpose the hardcoded _local_player has been removed from the function and is now passed as a parameter.
- CodeChange: To correctly accept engine-prototypes, the best-player checking has been moved to its own function, I hope it functions the same as before.
- CodeChange: Added symbolic types of PlayerID, OrderID and EngineID. For engines also added GetEngine() and IsEngineIndex(), similar to the other such functions.
- CodeChange: To correctly build industries, some tables have been moved to build_industry.h. The only way to find out currently if an industry is valid in a climate is by looping all industries and checking if it matches. Also to comply with the patch setting build_rawmaterial_industries, it is assumed that these industries do not accept any cargo of any type. This can and probably should changed in the future to some flag in their struct. Also use _opt_ptr instead of _opt.
- CodeChange: implemented the HQ checking code inspired by MarkR2 in "[ 1190944 ] Many commands not checked for security". Unfortunately it is impossible to prevent only deleting a HQ by a modified client atm.
- CodeChange: For insert order and modify order their parameters are implicitely truncated to 8 bits, instead of the 16 bits said in the comments.
GetVehicleTrackdir now tries to get a valid trackdir as much as possibly, by assuming that a vehicle is facing outwards in a depot or road station, for example.
- Codechange: [Multistop] Multistop now also tries to find a slot for road vehicles that are in stations, since the pathfinder now properly handles that.
- Add: GetVehicleTrackdir() helper function.
- Codechange: Moved SortStruct from vehicle_gui.h to ttd.h, so the dependency from vehicle.h on vehicle_gui.h could be removed.
- Codechange: Typedeffed the VehicleTypes struct so it can be used as the type for Vehicle.type instead of "byte".
- Codechange: Removed prototype for VehicleSorter(), which had no implementation anymore and was never called.
It do have one side effect through. Now no engines are added/removed from the train anymore, so it produces "half dualheaded engines"
This will be fixed when autoreplace will get a major overhaul at a later date
GetPrevVehicleInChain; this caused some nasty bugs in depots, like
wagons without engines complain about not being stopped, and stuff like
that. Hopefully this fixes those problems. With a big tnx to BJH for his
perfect demo!
-Codechange: rewrote some functions while moving waypoint-stuff
-Add: added support for 64k waypoints
-Fix: made the waypoint struct a bit more logic (no bit-fucking)
The bad sideeffect of this is that now no vehicle will automatically go to a depot anymore just
because it is set to be autoreplaced. We will have to find a better way to solve this problem.
Revisions reverted: 1640, 1707, 1709, 1710, 1712(but not the cheat prevention in this one)
-Codechange: Added wrappers around depot-access (GetDepot no exists)
-Codechange: Made depot-functions a bit more logic (no longer
GetDepotByTile crashes your game when you request it on a non-depot tile)
-Add: made depots dynamic (yes, 64k depots are possible now)
trains in one game (instead of the 240 which was the current value).
Default max allowed vehicles per type is changed:
Trains: 500 (old 80)
Road: 500 (old 80)
Ships: 200 (old 40)
Aicraft: 300 (old 50)
(Tnx to Celestar and Darkvater for checking the patch)
- Fix: added check for v->type in some commands, which expects v to be a specific type
Checks like this is needed to protect network servers from people, who hack their clients to either cheat or crash the server
NOTE: if I made a mistake here it can make a function unreachable when it should be used. Here is one place to look if something weird happens
a single station.
Thanks to: Truelight for the saveload code, Darkvater and Hackykid for
network testing and Tron for proof-reading 1500 lines of diff.
autoreplacing a dualheaded engine into a singleheaded engine now sells the rear engine
as a sideeffect of this, the price for replacing both engines are now added and displayed once from the depot(instead of two identical numbers written on top of each other, looking like one)
fix: cost for autorenew dualheaded engines were doubled and their value where doubled too
-Codechange: renamed all 'schedule' stuff to 'order(list)'
-Codechange: moved all order-stuff to order_cmd.c / order.h
-Codechange: vehicles that share orders are now linked to eachother
with next_shared/prev_shared in Vehicle
Developers: please use AssignOrder to assign data to an order. If not,
you _WILL_ make the save-routine to assert!
-Codechange: removed next_in_chain_old, and saved ->next for Vehicles
(and bumped savegame revision for that to version 4.4)
-Codechange: Added _sl.full_version, which has both major and minor version
(in prepare of dynamic arrays):
- DEREF_XXX is changed into GetXXX
- All direct call are directed via GetXXX
- struct Industry has now an index-field
- ENUM'd some stuff
- Replaced home built loops with FOR_ALL_XXX
- Added _stations_size, _vehicles_size, ... which gives the length of the
array (which will be dynamic in the near future)
- Changed lengtof(XXX) to _XXX_size (e.g. _stations_size)
- Removed all endof(XXX) (because mostly it was part of a FOR_ALL_XXX)
- Made the sort-functions of all 4 dynamic
- Made all 4 Initialize functions more of the same
- Some minor tab-fixing and stuff
(tnx to Tron for proof-reading my 100kb patch ;))
Note for all: please do NOT directly call _stations, _vehicles, _towns and
_industries, but use the right wrapper to access them. Thank you.
Ps: please also do not use 'v++', where v is of type Vehicle *.
This feature works much like autorenew, but it will get you a new engine type instead of a new one of the same type. Once
ordered, it will automatically replace the engines while they visits a depot. The GUI for setting this up have been added on the
vehicle overview windows
Note: autorenew is now autoreplace, but to the same engine type
Nice new features, that was added to make this possible
- windows can now have two independant vertical scrollbars
- CMD_SHOW_NO_ERROR have been added as a flag for DoCommandP. It will make it do the action instead of showing the red box with
estimated costs even if shift is pressed
- fixed problem where enginetypes where not initialized when loading a game. It's now done in InitializeGame()
an uint8 till the savegame version is bumped to version 5. Then it works
automaticly as a fully uint16. So _stations[] can not be increased till
after the bump!!
This adds a little button per vehicle class to the station window which opens a list of all vehicles that have this station on their schedule.
As side effect this gets rid of some global variables.
TTD stores invalid orders different than OTTD, this resulted in empty lines in the order list. With the overhaul of the order system this got worse: no line was shown at all.
Fix this by sanity checking while loading and convert the orders accordingly.
This adds no functionality, but is a stepping stone for future improvement (like 16bit order indices) and is easier to read.
This changes preserves binary compatibility wrt savegames.
- reduce to 2 sizes (*DParam64 for 64bit values, *DParam for the rest)
- use inline functions instead of macros
- add assert()s to check for buffer overruns
This includes 2 fixes
-Fix: [1048596] Monorail and Maglev sounds are swapped (r511)
-Add special case to load the jackhammer sound (r478)
The rest are cleanups und enumeration to make merging possible/easier
-Fix: Sorter icon pointing down 'v' sorts in every window lowest value first, '^' highest value first
-CodeChange: move Dropdownlist from settings_gui.c to widget.c. More in place there.
