|
|
|
@ -1,7 +1,7 @@
|
|
|
|
|
To control the power, two display LEDs (power and HDD activity) and two buttons (power and reset) are provided
|
|
|
|
|
on the front panel of the computer case. They are connected by wires to pins on the motherboard.
|
|
|
|
|
|
|
|
|
|
<img src="../atx_board/atx_board_5.jpg" width="400"/>
|
|
|
|
|
<img src="../atx_board/atx_board_5.jpg" width="500"/>
|
|
|
|
|
|
|
|
|
|
All you have to do is connect the PiKVM ATX controller to their wires by making a parallel connection.
|
|
|
|
|
Please note that the pinout differs on different motherboards, so before you continue,
|
|
|
|
@ -17,4 +17,4 @@ The connection of HDD led and reset switch is performed in the same way.
|
|
|
|
|
|
|
|
|
|
Be careful and respect the polarity of the LEDs. The polarity of the button does not matter (they have no polarity at all).
|
|
|
|
|
|
|
|
|
|
<img src="../_diy/atx_connection.png" width="400"/>
|
|
|
|
|
<img src="../_diy/atx_connection.png" width="500"/>
|
|
|
|
|