From 22beb7428b64f8c38d510e2e061d54ecdf6ccc21 Mon Sep 17 00:00:00 2001 From: Maxim Devaev Date: Sat, 2 Dec 2023 02:38:27 +0200 Subject: [PATCH] update --- docs/_diy_wiring_atx.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/_diy_wiring_atx.md b/docs/_diy_wiring_atx.md index e4156b0..1dcf96a 100644 --- a/docs/_diy_wiring_atx.md +++ b/docs/_diy_wiring_atx.md @@ -1,7 +1,7 @@ To control the power, two display LEDs (power and HDD activity) and two buttons (power and reset) are provided on the front panel of the computer case. They are connected by wires to pins on the motherboard. - + All you have to do is connect the PiKVM ATX controller to their wires by making a parallel connection. Please note that the pinout differs on different motherboards, so before you continue, @@ -17,4 +17,4 @@ The connection of HDD led and reset switch is performed in the same way. Be careful and respect the polarity of the LEDs. The polarity of the button does not matter (they have no polarity at all). - +