mirror of https://github.com/pikvm/pikvm
update
parent
3e1ec2243a
commit
0236f68f7a
@ -1 +1,20 @@
|
|||||||
<img src="../_diy/atx_connection.png" width="200"/>
|
To control the power, two display LEDs (power and HDD activity) and two buttons (power and reset) are provided
|
||||||
|
on the front panel of the computer case. They are connected by wires to pins on the motherboard.
|
||||||
|
|
||||||
|
<img src="../atx_board/atx_board_5.jpg" width="400"/>
|
||||||
|
|
||||||
|
All you have to do is connect the PiKVM ATX controller to their wires by making a parallel connection.
|
||||||
|
Please note that the pinout differs on different motherboards, so before you continue,
|
||||||
|
check the documentation on your motherboard for correct pinout.
|
||||||
|
|
||||||
|
The following illustration shows how the connection between the power led and the power button should be performed.
|
||||||
|
|
||||||
|
On the left are the wires from the PiKVM ATX controller, the pad in the middle indicates the pins on the motherboard,
|
||||||
|
and on the right are the LED and button of the target host. The implementation of this scheme is left to your discretion
|
||||||
|
and can be performed, for example, by cutting wires and performing twisting, followed by insulation with duct tape.
|
||||||
|
|
||||||
|
The connection of HDD led and reset switch is performed in the same way.
|
||||||
|
|
||||||
|
Be careful and respect the polarity of the LEDs. The polarity of the button does not matter (they have no polarity at all).
|
||||||
|
|
||||||
|
<img src="../_diy/atx_connection.png" width="400"/>
|
||||||
|
Loading…
Reference in New Issue