From 0236f68f7a3fa1b2d9030f4154699bd21e856686 Mon Sep 17 00:00:00 2001 From: Maxim Devaev Date: Sat, 2 Dec 2023 02:36:18 +0200 Subject: [PATCH] update --- docs/_diy_wiring_atx.md | 21 ++++++++++++++++++++- docs/v1.md | 2 +- docs/v2.md | 2 +- 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/docs/_diy_wiring_atx.md b/docs/_diy_wiring_atx.md index be3590c..e4156b0 100644 --- a/docs/_diy_wiring_atx.md +++ b/docs/_diy_wiring_atx.md @@ -1 +1,20 @@ - +To control the power, two display LEDs (power and HDD activity) and two buttons (power and reset) are provided +on the front panel of the computer case. They are connected by wires to pins on the motherboard. + + + +All you have to do is connect the PiKVM ATX controller to their wires by making a parallel connection. +Please note that the pinout differs on different motherboards, so before you continue, +check the documentation on your motherboard for correct pinout. + +The following illustration shows how the connection between the power led and the power button should be performed. + +On the left are the wires from the PiKVM ATX controller, the pad in the middle indicates the pins on the motherboard, +and on the right are the LED and button of the target host. The implementation of this scheme is left to your discretion +and can be performed, for example, by cutting wires and performing twisting, followed by insulation with duct tape. + +The connection of HDD led and reset switch is performed in the same way. + +Be careful and respect the polarity of the LEDs. The polarity of the button does not matter (they have no polarity at all). + + diff --git a/docs/v1.md b/docs/v1.md index 9fac592..aff405f 100644 --- a/docs/v1.md +++ b/docs/v1.md @@ -118,7 +118,7 @@ 3. ??? example "Connect the ATX controller if you built it" - {!_diy_wiring_atx.md!} + {!_diy_wiring_atx.md!} ----- diff --git a/docs/v2.md b/docs/v2.md index 33f2df6..377cadb 100644 --- a/docs/v2.md +++ b/docs/v2.md @@ -148,7 +148,7 @@ 3. ??? example "Connect the ATX controller if you built it" - {!_diy_wiring_atx.md!} + {!_diy_wiring_atx.md!} -----