If something needs to wake up the event loop it should be using an
async, as we are now with PumpLL(); but we had various code triggering a
wakeup, expecting that PumpLL gets called on every wakeup, which isn't
true anymore.
We trigger a pump immediately, but this is racey because we add to our
plaintext data in a worker thread; if the worker thread runs after the
pump then it ends up leaving plaintext to be handled, but there's no
wakeup until the next one.
This was the cause of seeing a random +1s and bunching added to ping
responses sometimes: it wasn't until the *next* ping goes through the
network that the plaintext queue gets processed, at which point it
flushes the old one and often the new one together.
The fix here gets rid of the map of sessions needing wakeups and instead
adds an atomic flag to all of them to let us figure out which ones
need to be flushed.
call_soon wakes up the mainloop and is often reentrant, we dont want to
ever way up the event loop but we also want to always defer the call so
we always use the workers
* use std::source_location instead of godawful macros in logging
* remove unused/absolutely haram af json logstream
* fix bug in android logger where it doesn't respect eLogNone
before when we get the list of router ids for gossip it was highly bias towards outbound sessions.
instead now we get a full list of link session router ids in random order, truncate them to be at most MaxGossipPeers number of keys, and then put them into an unordered set
* make it so that we don't set up unbound resolver when we have no resolvers provided by config
* clean up dns codepath and make it use llarp::SockAddr instead of llarp::IpAddress
* add remove_node_from_failing to remove a node by pubkey from the failing set
* if a router is deregistered we remove it from the failing set so we don't retest it
* remove a router from the failing set if we get a test success
currently creating an outbound session will cancel if we have any session
at all with the relay. instead, only cancel if we have an outbound session
to that relay. this is useful for reachability testing.
* immediately poke routes when we are told to use an exit so that packets get pushed which makes an exit path happen
* fix up cmake oddity in nsis section
* not gossip our rc
* not explore the network to prevent outbound session attempts
* not establish sessions to other service nodes
* close all open sessions we have to tell clients we don't want them
* catch exceptions flushing peerdb in disk thread
* don't connect out to non allowed routers
* simplify logic in RCLookupHandler::RemoteIsAllowed()
* add HaveReceivedWhitelist to I_RCLookupHandler base type
* add LooksDeregistered to Router type that tells us if we think we are deregistered
* don't allow building paths over us if we are deregistered
Fixes a subtle memory leak that was a result of outbound messages which
were in the shared queue (not yet sorted into a per-path queue) when a
path was removed, resulting in a ghost path queue (and thus round-robin
order entry as well).
Adds much needed documentation to the outbound message handler class.
Wires up systemd support to configure DNS on startup and when
enabling/disabling exit mode.
On startup (and when turning off an exit) we tell systemd-resolved to
direct .loki and .snode lookups to lokinet (leaving other DNS traffic
alone).
On exit enabling, we reconfigure it to resolve "." (i.e. the root DNS
domain) so that all lookups come into it.
* add srv records in RCs if we have any
* add mechanism to add SRV records for plainquic exposed ports
* resign and republish rc or introset on srv record changes
* add lokinet_add_bootstrap_rc function for adding an rc from memory
* prevent stack overflow on error closing connection in quic
* add in memory nodedb
* refactor how convotags are set as active
* add initial stubs for endpoint statistics
* refactor time stuff to be a bit cleaner
* update lnproxy script with more arguments
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
loop->call(...) is similar to the old logic->Call(...), but is smart
about the current thread: if called from within the event loop it simply
runs the argument directly, otherwise it queues it.
Similarly most of the other event loop calls are also now thread-aware:
for example, `call_later(...)` can queue the job directly when called if
in the event loop rather than having to double-queue through the even
loop (once to call, then inside the call to initiate the time).
- removes all the llarp_ev_* functions, replacing with methods/classes/functions in the llarp
namespace.
- banish ev/ev.h to the void
- Passes various things by const lvalue ref, especially shared_ptr's that don't need to be copied
(to avoid an atomic refcount increment/decrement).
- Add a llarp::UDPHandle abstract class for UDP handling
- Removes the UDP tick handler; code that needs tick can just do a separate handler on the event
loop outside the UDP socket.
- Adds an "OwnedBuffer" which owns its own memory but is implicitly convertible to a llarp_buffer_t.
This is mostly needed to take over ownership of buffers from uvw without copying them as,
currently, uvw does its own allocation (pending some open upstream issues/PRs).
- Logic:
- add `make_caller`/`call_forever`/`call_every` utility functions to abstract Call wrapping and
dependent timed tasks.
- Add inLogicThread() so that code can tell its inside the logic thread (typically for
debugging assertions).
- get rid of janky integer returns and dealing with cancellations on call_later: the other methods
added here and the event loop code remove the need for them.
- Event loop:
- redo everything with uvw instead of libuv
- rename EventLoopWakeup::Wakeup to EventLoopWakeup::Trigger to better reflect what it does.
- add EventLoopRepeater for repeated events, and replace the code that reschedules itself every
time it is called with a repeater.
- Split up `EventLoop::run()` into a non-virtual base method and abstract `run_loop()` methods;
the base method does a couple extra setup/teardown things that don't need to be in the derived class.
- udp_listen is replaced with ev->udp(...) which returns a new UDPHandle object rather that
needing gross C-style-but-not-actually-C-compatible structs.
- Remove unused register_poll_fd_(un)readable
- Use shared_ptr for EventLoopWakeup rather than returning a raw pointer; uvw lets us not have to
worry about having the event loop class maintain ownership of it.
- Add factory EventLoop::create() function to create a default (uvw-based) event loop (previously
this was one of the llarp_ev_blahblah unnamespaced functions).
- ev_libuv: this is mostly rewritten; all of the glue code/structs, in particular, are gone as
they are no longer needed with uvw.
- DNS:
- Rename DnsHandler to DnsInterceptor to better describe what it does (this is the code that
intercepts all DNS to the tun IP range for Android).
- endpoint:
- remove unused "isolated network" code
- remove distinct (but actually always the same) variables for router/endpoint logic objects
- llarp_buffer_t
- make constructors type-safe against being called with points to non-size-1 values
- tun packet reading:
- read all available packets off the device/file descriptor; previously we were reading one packet
at a time then returning to the event loop to poll again.
- ReadNextPacket() now returns a 0-size packet if the read would block (so that we can implement
the previous point).
- ReadNextPacket() now throws on I/O error
- Miscellaneous code cleanups/simplifications
- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
* fix deadlock in #1453
* remove use of shared_lock in profiling
* clean up Save and Load to acquire lock
* bencode and bdecode are now non locking
* remove all places using std::shared_lock
* bail if write fails
* deny message delivery from non registered nodes when whitelist is enabled and applicable
* use DoCallback and return true so that the event gets fired right