Also tweak ReaderHighlight:onHoldRelease() to avoid
doing its stuff when onHold() is clearing highlight
(previous CheckButton was closing/clearing on hold
release, new TitleBar close button does that on hold).
- Book map: shows a map of content, including TOC,
boomarks, read pages, non-linear flows...
- Page browser: shows thumbnails of pages.
- ReaderThumbnail: new Reader module that provides
a service for generating thumbnails of book pages.
It makes available these 2 new fullscreen widgets.
- ReaderBookmark, ReaderLink, Statistics: add methods
to return new views of bookmarks, previous locations
and read pages, that are needed by BookMapWidget.
- ReaderToc: compute TOC max_depth.
- ReaderBookmark, ReaderHighlight: send events on
bookmark add/update/remove so thumbnails of the
pages impacted can be trashed.
Cloud storage redesign, including:
(1) show server type in the list of storages
(2) add new cloud storage with a "plus" button (requires #8564)
(3) when browsing in a storage, the "plus" button is changed to the "home" button, to return to the CloudStorage home screen.
When switching screen rotation, have the re-rendering
properly done only via :onUpdatePos().
When changing alt status bar font size, also have it
done via :onUpdatePos() instead of the next painting
(this also update any dogear position after the resize).
When in scroll mode (no alt status bar), be sure to
draw crengine progress bar at top (and not below the
not shown alt status bar).
Wrap document opening and re-renderings (which can block
the app for some time) with setIgnoreInput() to avoid ANR
on Android.
Any setting update that could possibly cause a re-rendering
should send the UpdatePos event, to ensure the re-rendering
happens in ReaderRolling:onUpdatePos() where precautions
are taken to avoid ANR.
Move Default and extra buttons above Cancel/OK.
Default values shown in the default button.
Precisions can be set for both values separately.
Minor geometry fix for consistence with SpinWidget.
Bookmark/highlight formats in crengine and mupdf are incompatible.
This backups and restores bookmarks and highlights when opening the
document with an incompatible engine, instead of deleting them.
Fuzzy searching doesn't work with CJK text: with Japanese,
we get large numbers of useless results because sdcv
decides to strip off the wrong part of the word.
It seems unlikely that sdcv correctly handles Korean
or Chinese, so just disable fuzzy searching on all
CJK-containing word lookups.
Add a "Select" button in the highlight dialog to initiate
text selection; on the next text selection, the text between
these 2 points will be selected.
Limited to a single page with non-CRE documents.
Also move "Search" button at end, so it's the one that
will be wide in case of an odd number of buttons.
It's possible for the user to have selected nothing, and trying to
operate on the nil highlight can cause confusion or crashes. This
restores the behaviour before commit 7a0e3d5e68 ("readerhighlight:
remove selected_word and use selected_text everywhere"), which missed
this case.
In addition, add some debug guards to ReaderHighlight methods which
cannot handle selected_text being nil (or at least, shouldn't be called
with selected_text being nil).
Fixes: 7a0e3d5e68 ("readerhighlight: remove selected_word and use selected_text everywhere")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Now that FileManager registers its UI modules in the same way as Reader,
this shouldn't be necessary but this protects us against some other app
creating a ReaderDictionary instance without having ui.languagesupport
registered properly.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
With the addition of the language support module, ReaderDictionary
tries to use modules registered with the UI instance, but the
FileManager doesn't provide key-based registration of its UI modules.
In order to allow the same code to be used by both FileManager and
Reader seamlessly, copy the :registerPlugin() method from Reader and use
it with FileManager. This will ensure any other hidden assumptions about
UI module registration are handled properly.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
- Add an icon to distinguish between page bookmarks, plain
highlights, and highlights with an added note
- Bookmark details: show both highlighted text and added note
- Bookmark list: allow filtering by type and/or by keyword
- New bookmark selection mode, to allow multiple removals
- New option: show separator line
This creates a new plugin system which hooks into a handful of reader
operations in order to allow plugins to add language-specific support
where the default reader falls short. The two hooks added are:
* During hold-without-pan taps, language plugins can modify the
selection in order to better match what users expect koreader to
highlight when selecting a single word.
The vast majority of CJK language words are more than one character,
but KOReader treats all CJK characters as a single word by default,
so adding this hook means that readers no longer need to manually
select the whole word every time they need to look something.
* During dictionary lookup, language plugins can propose alternative
candidate words to look up if the selected word could not be found in
the dictionary.
This is pretty necessary for Japanese and Korean, both of which are
highly agglutinative languages and the fuzzy searching system of
StarDict is simply not usable because often the inflection of the
word is so much longer than the dictionary form that sdcv decides to
chop off the actual word and search for the inflection (which yields
useless results).
This system is of particular interest for readers of CJK languages
(without this, looking up words using KOReader was fairly painful) but
this system is designed to be minimal and language-agnostic enough that
other languages could make use of it by creating their own plugins if
the default "whole word" highlight and fuzzy-search system doesn't match
their needs.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
In order to make startSdcv usable for plugins that might need to do
dictionary lookups in order to work, it is necessary to split out the
core of startSdcv into another method which returns the raw data from
sdcv.
In addition, in order to make it possible to amortise the cost of each
lookup (which could be fairly expensive) make it possible to pass
multiple words to rawSdcv at the same time. Sdcv supports passing
multiple words as arguments (which it then looks up in order and returns
a separate JSON array per line for each word) so we just need to tweak
the return style accordingly.
All of the deduplication and dummy results handling remains in startSdcv
because plugins might strongly depend on whether sdcv returned actual
results.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
There were two ways of specifing selected text for a highlight depending
on whether it was a "single word" or text selected using hold-and-pan.
In addition to being a bit more complicated than is necessary, with the
addition of the language support plugin system (where the "single word"
selected might be expanded), it makes more sense to simply use the same
logic and table structure for both cases.
The dictionary lookup special case (hold-without-pan triggering a
dictionary lookup by default) still works as before.
In addition, this patch fixes a minor inefficiency during dictionary
quick lookup -- before this patch, the highlight would be re-selected
because the quick lookup window is run concurrently and tries to fetch
ReaderHighlight.selected_text but this is set to nil immediately after
triggering the lookup. This is unnecessary because :clear() will be
called anyway when the quick pop-up closes, and so clearing this can be
left until then.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
* Use paintRect and plain colors instead of lightenRect and a weird
dimming factor.
* Update call sites to the new API
* Handle FP maths properly (i.e., floor coordinates & ceil dimensions at
the latest possible time).
* Fix border handling in the fill bar (make sure we actually honor it
when computin the x position, and that we won't overflow into it when
computing the width).
* Update docs
Reword "Purge .sdr" to "Reset settings".
When purging, remove only the known document metadata
files, and not those for a document with the same name but
a different suffix.
Bookmarks list:
- page numbers are displayed
- page bookmarks are marked with a star
- new setting: Sort by largest page number (default: checked)
New bookmark setting: Add page number / timestamp to bookmark
- If enabled (default), bookmark name is 'Page # notes @ time'.
- If disabled, bookmark name is equal to the notes field.
Rename bookmark dialog:
- page number and timestamp are displayed in the input
dialog description
- blank input renames bookmark to the default name in
accordance with the new setting
Also fix: changing boundaries of the highlight: the name of the
highlight is not changed if it was previously edited by the user.
Discussion in #6409.
Highlight action renamed to Long-press on text and moved from Gear - Document to Gear - Taps and gestures.
Added action Do nothing.
Removed menu item Typeset - Highlighting - Allow highlighting.
Fixed untranslated strings in the Cycle highlight action notification.
Long-press on images always opens ImageViewer. Closes#6409.
* Gestures: standardize hold to long-press
* Common settings menu: standardize hold to long-press
* Readerstyletweak: standardize hold to long-press
* Readersearch: standardize hold to long-press
Also: Text editor now closes its keyboard when calling Find
and Go to line (which open their own keyboards) to avoid
conflicts between multiple keyboards.
Includes among others:
- (Upstream) Various CHM handling fixes, and others
- HTML documents: rebuild TOC from headings after load
- Font: use metrics for underline offset and thickness
- epub.css, html5.css: tweak ruby styling
- CSS: fix EPUB's head>style content encoding
- CSS: add support for 'box-sizing: content-box/border-box'
- CSS: support for styling the <html> element
Also bump KoboUSBMS to v1.2.2 and FBInk to v1.24.0.
ReaderFont's "Generate font test document": update the
generated HTML so its ToC is build from proper HTML headings.
If this is not done, the URL when the file is downloaded will be
something like hostdir/path, rather than host/dir/path.
Also add a debug log to make it more clear when a bogus URL
is being fetched,
When enabled, if the book has some supported language tag
in its metadata, use it as the source language. Otherwise,
fallback to the current settings (auto-detect or selected
source language).
Go to the directory of the deleted file, instead of the folder you happend to switch into the reader from as this may have changed (via changing books from history etc)
Make "Taps and gestures - Page turns" available only in reader.
Move there other page turn related menu items from Navigation.
Remove duplicated code. Added standard "star" for default RTL.
TileCacheItem: add created_ts property.
Document: manage a tile_cache_validity_ts and ignore
older cached tiles.
This timestamps is updated when highlights are written
as annotations in, or deleted from, the PDF, so we can
get the most current rendered bitmap from MuPDF and
avoid highlight ghosts on old tiles.
Save this timestamp in doc settings so older cached to
disk tiles will also be ignored across re-openings.
Bump base for: mupdf.lua: update frontend pboxes with
MuPDF adjusted ones.
We may get multiple boxes when selecting texts, one for each
word, and we have to add spaces between the extracted words
ourselves. Previously, we were only adding a space if the
last char of previous word was ASCII, so missing spaces
after accents or greek words.
Try to do better by measuring the distances between boxes
and comparing to box heights, with a few heuristics.
Bump base for cre.cpp cleanup and utf8proc FFI.
Add a checkbutton for case sensitive search in FileBrowser,
and use Utf8Proc.lowercase() for case insensitive search.
Also use it in ReaderUserHyph as a replacement for
crengine getLowercasedWord().
- bump crengine: findText(): add support for regular
expression search.
- bump base: add thirdparty/srell/srell.hpp, a C++ library
that provides Unicode regex support, used by crengine.
- ReaderSearch: with credocuments, add checkboxes for case
sensitive and regular expression search.
Instead of baking in a hyphen, so as to avoid signed zeroes, or
confusion with page progress if page maps are enabled.
Also, made compact itemps RTL friendly.
Menu: display the right item ("mandatory") with a
smaller font size related to the left item font size,
instead of a function of perpage.
ToC popups: use same font size as in ToC.
Migrate *global* zoom_mode settings to genus/type, too.
Nothing can actually set this as a global anymore, but we still honored
it nonetheless.
Fix#7778
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
By showing a warning, instead of not passing any -u flag to sdcv and letting it query *all* dictionaries if FS order...
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
This is handled in an Event handler, but we have zero guarantee that
we're actually the *final* Event sent to the Document, and other Events
usually kinda need the Document instance to still be alive ;).
Delay action until the next tick to avoid potential crashes.
* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
(i.e., when History is spawned from ReaderUI, delay the flash until we
*show* the next widget, instead of when we close the current RD
instance).
Prevents flashing the InfoMessage.
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
- TextWidget: avoid crash with small max_width (could happen
when opening menu on a small emulator window)
- TextWidget: avoid crash if re-used after :free()
- ReaderHighlight:clear(): fix possible crash when
scheduled and run after document closed
- DictQuickLookup: minor canSearch() tweak ('selected_text'
is normally available only on multiple words selection,
but is currently available on single word selection thanks
to some unrelated side effect)
Whith the new font size step of 0.5 (46a2d9c), the gesture
for increasing or decreasing font size would change the
size by only half of the given value.
* Tear down FM instances properly
* Don't manhandle ReaderUI too much, and document when the tests do
actively broken shit, like bypassing safeties to open two // ReaderUI
instances.
We're now more careful about this, so, I suppose weird timings may mean
we might be trying to access a nil here.
Fix#7706
Guard a few other similar constructs
Namely, instead of making it lower priority than readerhighlight and
hoping for the best, make it higher priority, as it should (ReaderFooter
itself is *above* Reader, after all), with a sane set of fallthroughs:
* No footer
* No hold-to-skim
* Held outside the footer (but inside the footer tap zone)
This made the crap workaround from #7466 unnecessary, and actually fixes
the behavior in PDFs (because readerhighlight will match the *physical*
page, which may include off-screen content) and ePubs w/r eclaim bar
height (in which case, there's actual content behind the footer that
readerhighlight could have matched on).
Fix#7697
We've managed to trip a few of those on dimen fields post-init but
pre-paintTo in a few weird coner-cases, a point at which dimen is often
nil.
ConfigDialog: Deal with that very thing in update()
Fix#7656
A dotted line joining the ToC entry text to the
page number may make it easier to use.
(This replaces the menu item separator from d879062e.)
Also fix baselines aligment, which could be a bit off.
* FileManager/ReaderUI: Clarify the current instance accessor
Make it clearer that we actually store it in a *module/class* member, not an *instance* member.
Also, warn if there's a close/open mismatch.
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
* Ensure that going from one to the other tears down the former and
its plugins before instantiating the latter and its plugins.
UIManager: Unify Event sending & broadcasting
* Make the two behave the same way (walk the widget stack from top to
bottom), and properly handle the window stack shrinking shrinking
*and* growing.
Previously, broadcasting happened bottom-to-top and didn't really
handle the list shrinking/growing, while sending only handled the list
shrinking by a single element, and hopefully that element being the one
the event was just sent to.
These two items combined allowed us to optimize suboptimal
refresh behavior with Menu and other Menu classes when
opening/closing a document.
e.g., the "opening document" Notification is now properly regional,
and the "open last doc" option no longer flashes like a crazy person
anymore.
Plugins: Allow optimizing Menu refresh with custom menus, too.
Requires moving Menu's close_callback *after* onMenuSelect, which, eh,
probably makes sense, and is probably harmless in the grand scheme of
things.
* PluginLoader: Allow querying whether a specific plugin is loaded (instantiated, actually).
Re #7598
* PluginLoader: Add a method to access a specific Plugin's instance
(Besides `self.ui[plugin_name]`, that is).
Requires some nastiness to avoid pinning stale references in memory :s.
* PluginLoader: Tweak genPluginManagerSubItem to keep from rebuilding `self.all_plugins`, it's using `loadPlugins`, which is cached, so it made no sense to re-compute this one.
Includes:
- MathML: a few minor fixes
- (Upstream) lvtext: fix possible index out of range
- Fonts: RegisterExternalFont() should take a documentId
- Fonts: fix: letter-spacing should not be applied on diacritic
- (Upstream) Fonts: more granular synthetic weights
- Fonts: synthesized weights: tweak some comments
- Fonts: keep hinting with synthetic weight
- Fonts: fix synthesized weight inconsitencies
- Fonts: fix getFontFileNameAndFaceIndex()
- Fonts: adds LVFontMan::RegularizeRegisteredFontsWeights()
- Fonts: handle synth_weight tweaks in glyph/glyphinfo slots
- (Upstream) Fonts: fix some compiler warnings
- Fix hyphenation on Armenian and Georgian text
Update the bottom menu widget "Font Weight" to allow more
granular weights than the previous "regular | bold".
Also bump thirdparty/luasec to v1.0.1.
Similar in spirit to the previous commit, although since we're drawn as
part of the CRe page, this is just the refresh per-se that's optimized,
it had no chance to actually be visible.
Make sure we don't repaint the footer over anything else than ReaderUI,
as some events are fired without direct UI interaction, so we can't be
assured of the actual state of the UI.
Fix#7556
Exposed since #7379, but could arguably happen with other existing
handlers before.
* Support cancelling individual moves.
Coopt the cancel button to actually do just that, cancel, instead of close.
* Don't close when hitting the accept button, allowing to chain multiple moves.
Changes are still propagated to the caller on each individual move, though.
* Update the new icons to match our usual stroke width.
* ReaderToc: Tweak padding around items to be a tad more balanced for multi-level ToCs, and perfectly balanced for flat ToCs. (Re #7548)
* ReaderToc: Make the onHold popup's width match said padding. (Re #7548)
* InfoMessage: Allow passing the alignment flag to TextBoxWidget
* ReaderToc: Center text inside the InfoMessage onHold popup
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
There have been a couple of these this month, and keeping stuff that should only ever run once piling up in their respective module was getting ugly, especially when it's usually simple stuff (settings, files).
So, move everything to a dedicated module, run by reader.lua on startup, and that will actually only do things once, when necessary.
Attempting to update a highlight when matching on a bookmark doesn't
make sense, and no longer works since #7411
Also, switch to ipairs(), and stop piggybacking on a new local that
shadows or uses the function's item argument.
It works in Lua, but it's super weird and error-prone.
Fix#7520 (regression since #7411).
Cache's state tracking
Re #7510
Legacy cache has to be deleted in Cache,
*before* the first getDiskCache call.
Reword the "Clear caches" Dev menu entry & callback:
We now have an actual "Restart" action (on most, if not all, platforms).
And we clear the whole cache folder, which may host other things (e.g.,
fontlist)
Generic feature added to TouchMenu: an optional callback
'open_on_menu_item_id_func()' set on an items table can
tell which menu item should be shown when opening a menu.
TouchMenu: allows jumping to first or last page with
long-press on the chevrons.
* Change 'Find a file' to 'File search' for consistency
There is 'File search' in the Gesture manager already.
There is 'Fulltext search' in the readermenu.
Some help text added.
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* Add a new socketutil module with a few helper functions that allow us to:
* Always use a sane User-Agent (previously, only Wikipedia did so)
* Set timeouts in an almost sane manner. Doing it explicitly prevents an interaction with KOSync that does crazy stuff I don't even want to try to understand.
* Unified said timeouts based on the request's intended usage (except for Wikipedia, which already had meaningful timeout values).
* Stopped using LuaSec directly, LuaSocket defers to LuaSec sanely on its own. Everything now transparently supports HTTPS without code duplication.
* Screensaver: Unbreak screensaver_stretch_images
We don't have real ternary operators in Lua, if the second argument evaluates to false, it doesn't work.
Invert the test to avoid this pitfall.
(c.f., http://lua-users.org/wiki/TernaryOperator).
Fix#7402, regression since #7371
* Free a few similar constructs (incidentally, some of 'em also tweaked in #7371 ^^).
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
Instead of piggybacking on InputContainer's onInput trickery for hold_input & tap_input.
Also, don't flag the buttons from that InputDialog as vsync, because that was stupid ;).
Fix#7357
* Menu/KeyValuePage/ReaderGoTo: Unify the dialogs. (Generally, "Enter page number" as title, and "Go to page" as OK button).
* Allow *tapping* on pagination buttons, too. Added spacers around the text to accommodate for that.
* Disable input handlers when <= 1 pages, while still printing the label in black.
* Always display both the label and the chevrons, even on single page content. (Menu being an exception, because it can handle showing no content at all, in which case we hide the chevrons).
* KVP: Tweak the pagination buttons layout in order to have consistent centering, regardless of whether the return arrow is enabled or not. (Also, match Menu's layout, more or less).
* Menu: Minor layout tweaks to follow the KVP tweaks above. Fixes, among possibly other things, buttons in (non-FM) "List" menus overlapping the final entry (e.g., OPDS), and popout menus with a border being misaligned (e.g., Calibre, Find a file).
* CalendarView: Minor layout tweaks to follow the KVP tweaks. Ensures the pagination buttons are laid out in the same way as everywhere else (they used to be a wee bit higher).
