Add a left button to the title bar to show the list
of results as a popup.
Dictionary: tap or long-press on that button give
different view of the results.
Wikipedia: request 30 results instead of 20, so we
can show 15, 10 or 6 of them per page of that popup.
With tall ButtonDialog with many rows, allows for a more
natural and readable scrolling without any truncated row
(like in Excel, we previously behave as web browsers).
ButtonTable:
- make the span and separator layout more explicite
- add some small horizontal padding when button text
is centered
When the containee is row-based, this can ensure that when
scrolling with swipes, we get the a full row at top, and
that any truncated row at top or bottom is fully visible
after a swipe.
The final height of a button could be different whether
a smaller font size or multiline end up being used.
Also fix 2-lines logical error making it less favored.
Also forward any lang property to the underlying text widgets.
* Rewrite the loop mechanism to use scheduled tasks instead of a single blocking-ish subprocess.
* Change the actual logic to be more pleasing to the eye, especially on newer devices, as those *may* natively ramp on set; and fix a bad interaction with that behavior that could lead to no ramp at all on ramp down.
* Simplify Generic's Suspend handling to deal with the refresh ordering in a saner manner. The screensaver might be visible a tad longer than before this change before the frontlight actually ramps off.
Add a top left menu item -/+ to show none, only on the
first thumbnail of a row, or on all thumbnails.
Also make the page slot separator longer in the bottom
ribbon before pages that start a thumbnails row.
Also show a little spike in the bottom ribbon below page
slots that get their page number displayed, to ease
figuring out the connection.
Change algorithm to comparing all kv pairs.
Also ignore any pairs where the value is "" when computing
the alignment, since they usually are intended more as
a title and should not interfere.
Handle scroll by row or page a bit differently, so we dont
constrain and readjust the focus page when reaching book
start or end: when later scrolling in the other direction,
we'll find exactly the view as it was (this means that
we allow a single thumbnail in the view, but it's less
confusing this way).
When using the new option "Daily timeline starts at",
make the separator line between 23:00 and 00:00 thicker.
Also tweak time picker to pick minutes by units of 10,
and remove max hour (06:00) limitation.
Split original very long help text (which was very
slow to display) into 2 parts: About... and Available
gestures.
Also add -/+ buttons to change things (which can already
and more practically be done with swipes along the edges)
to give a bit of meat to these menus.
When passing as 'anchor' a Geom object (ie. a widget dimen
or a ges.pos), or a function returning such an object,
a MovableContainer will be initially positionned near this
point/widget, instead of being centered on the screen.
Allow that for ButtonDialog and ButtonDialogTitle, so we
can make them behave as context menus (ie. for a titlebar
top left/right icons).
If buttons and their text would fit in a smaller width,
reduce the whole ButtonTable width.
May be used for properly sized context menus with
ButtonDialog, with the width required depending on
the translations for a language.
Make these 2 widget behave similarly, and don't rely on
ButtonTable default width for their own default width.
ButtonDialogTitle: also properly size its title.
Properly compute Button and separator widths,
instead of using magic numbers (which lost their
magic over the years :)
Ensure buttons and progress widgets are properly
aligned on the sides.
Move the optional Warmth "Configure" button in the
middle of Warmth Min and Max.
Fix keyboard navigation layout, which was not working
on devices with Warmth.
All our widgets are considering their provided 'width'
as the outer width, except Button which considered it
as some 'inner width', to which padding/border/margin
were added. Let's have them all consistent.
Some other widgets using Button had tweaks to account
for that odd behaviour: fix and simplify them.
Also fix Button layout when text is left aligned.
For example, to determine whether the Japanese or Chinese form should be shown.
* Dictionaries.lua - use iso3 codes everywhere
readerdictionary.lua - convert iso to bcp tag, to construct ifo_lang
isolanguage.lua - map from iso3 to full language name, map from iso3 to bcp language tag
* Make the full language names translatable
* Store ifo information from dictionaries.lua in downloaded dictionaries
As done in DictQuickLookup (more event handlers are
needed to cohabitate well with MovableContainer).
By default, selected word or text is copied to clipboard.
Also provide indexes to any long-press callback, as we'll
need them for View HTML.
- Fix sorting folders when collate is "type", "size", "percentage":
folders are sorted by name now.
- Fix getting next file in folder when collate is "mixed files and
folders": returned nil when next item was a folder.
Also don't propagate tap/hold on disabled menu items.
(When top and bottom menu displayed at the same time,
tap on a disabled top menu item could active some
bottom toggle change.)
Re: https://github.com/koreader/koreader/issues/9806#issuecomment-1416827447
Depends on https://github.com/koreader/koreader-base/pull/1576
Includes assorted cosmetics tweaks related to duplicate `setDirty` calls when instantiating widgets that already have an `onShow` handler doing it. (I left widgets doing it in `update` instead of `init` alone, on the assumption that callers *may* be relying on that behavior when updating widgets at runtime. This might actually never matter, and it certainly didn't for ScreenSaverWidget, which is why I removed it from there ;p).
Use both a whitelist for targeted widget repaints, a blacklist for no repaint at all, and a fallback for a full in-order ReaderUI repaint when unsure.
Use a similar approach in ReaderHeader (i.e., prevent explicit refreshes while ReaderMenu is open).
Re #9979, re #9768
* Move natural sorting algo to a dedicated sort module to avoid code duplication
* Use a slightly more accurate algorithm, and speed it up by caching intermediary strings
* Calibre: Use natural sorting in metadata search (fix#10009)
Prevent any later hold_release event from being handled
by MovableContainer as a moving touch+hold_release.
This issue was noticable when closing DictQuickLookup
with long-press on close, resulting in the movable
highlight actions ButtonTable moving to where the
long-press happened.
The x and y coordinates of SortItemWidget's checkmark widgets were not updated, thus remained at their initial value 0.
Consequently the intersectWith check in SortItemWidget:onTap always evaluated to false, resulting in taps on checkmarks in the sort widget not being recognized.
Co-authored-by: NiLuJe <ninuje@gmail.com>
Go through a dedicated sticky invisible widget instead of piggybacking
on ScreenSaverWidget, so that we behave if there are other InputContainers
in ScreenSaverWidget, or if there isn't any ScreenSaverWidget at all.
Fix#9911, fix#9955
I'm not *quite* sure what's responsible for inverting the padding
values, since the only Widget I can see doing that is FrameContainer,
and I can't find any in that Widget chain, but, oh, well.
Easily reproducible with the FileManager's TitleBar left/right buttons
(i.e., Home & Plus).
- Cleanup search and animation codes, fix inconsistencies
between animation/no-animation opening, and refreshes
glitches on eInk.
- Show menu item on tap, with buttons to either open
directly, or to walk there (removed earlier "Animation"
checkbox, so the choice can be decided later).
- Move event handlers into ReaderMenu/FileManagerMenu.
- Avoid duplicated and confusing results from gestures
and font-family submenus.
Adds the ability to re-assign which book a word belongs to
and change the name of an existing book. It can be used as
a way to regroup words and hide/show them by book.
This is made easier by the fact that only a single method in a single
widget actually handles Gesture, and that we barely ever overload it.
So, apply a bit of monkey-patching trickery to handle the magic :).
Fix#9695
Get rid of the doc & seqtext fields, as they are not actually used (nor
are they particularly useful, the event handler's name should be pretty
self-explanatory).
Also, tweak the key_events documentation to highlight the quirks of the
API, especially as far as array nesting is involved...
Random drive-by cleanup of the declarations of key_events & ges_events
to re-use the existing instance object (now that we know they're sane
;p) for tables with a single member (less GC pressure).
* Added a new plugin external-keyboard. It listens to USB events. When keyboard is plugged in or plugged out, it updates device and input configuration accordingly.
* Added new fake events UsbDevicePlugIn and UsbDevicePlugOut that are emitted when a device is connected to a book reader that plays the role of USB host. The usage of the existing events UsbPlugIn and UsbPlugOut has not changed - they are used when a reader is connected to a host. The koreader-base has a related PR for those events.
* Did a small refactoring of initialization for the modules FocusManager and InputText. They check device keyboard capabilities on their when the module is first loaded and store it. Some of the initialization code has been extracted into functions, so that we can re-initialize them when keyboard is (dis)connected.
* Initial implementation centered around text input, and tested with USB keyboards on devices with OTG support.
* Said OTG shenanigans are so far supported on devices with debugfs & the chipidea driver, or sunxi devices.
* Iterate over varargs directly via select if possible
* Use table.pack otherwise (https://github.com/koreader/koreader-base/pull/1535).
* This allows us to simplify a few Logger calls, as logger now handles nil values.
This PR adds support for a Thai keyboard. Layout mostly copied from my phone, with difference in diacritics placements: phone has only one key for all of them, while here we have a couple more. Swipe in different directions needed for inputing them.
The ultimate goal is for toast widgets (i.e., Notification when flagged as such) to:
* Not stop event propagation
* Close themselves when the event was emitted by user input.
Instead of doing event filtering in UIManager, we simply overload the onGesture & onKey* handlers in Notification to do just that, and just make sure UIManager will *send* those events to toasts, but without affecting the usual semantics of top widget selection and event propagation (which is as simple as just calling handleEvent on them unchecked ;p).
Thanks to @poire-z for the brainstorming in https://github.com/koreader/koreader/issues/9594 ;).
This also happens to fix a bug in which we might have looped on the top widget twice, because of an array vs. hash mishap ;).
Also, make sure references are actually dropped,
no matter how the widget is closed, by relying on onCloseWidget ;).
Enable the "long-press-on-close" trick on the actual Close button,
too, instead of only on the title bar's cross.
Fix: https://github.com/koreader/koreader/pull/9586#issuecomment-1272332275
* Persist: support serpent, and use by default over dump (as we assume consistency > readability in Persist).
* Logger/Dbg: Use serpent instead of dump to dump tables (it's slightly more compact, honors __tostring, and will tag tables with their ref, which can come in handy when debugging).
* Dbg: Don't duplicate Logger's log function, just use it directly.
* Fontlist/ConfigDialog: Use serpent for the debug dump.
* Call `os.setlocale(C, "numeric")` on startup instead of peppering it around dump calls. It's process-wide, so it didn't make much sense.
* Trapper: Use LuaJIT's serde facilities instead of dump. They're more reliable in the face of funky input, much faster, and in this case, the data never makes it to human eyes, so a human-readable format didn't gain us anything.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
* This removes support for the following deprecated constants: `DTAP_ZONE_FLIPPING`, `DTAP_ZONE_BOOKMARK`, `DCREREADER_CONFIG_DEFAULT_FONT_GAMMA`
* The "Advanced settings" panel now highlights modified values in bold (think about:config in Firefox ;)).
* LuaData: Isolate global table lookup shenanigans, and fix a few issues in unused-in-prod codepaths.
* CodeStyle: Require module locals for Lua/C modules, too.
* ScreenSaver: Actually garbage collect our widget on close (ScreenSaver itself is not an instantiated object).
* DateTimeWidget: Code cleanups to ensure child widgets can be GC'ed.
* ImageViewer: Minor code cleanups
* GestureDetector: Fix the `distance` field of `two_finger_pan` & `two_finger_swipe` gestures so that it's no longer the double of the actual distance traveled. Get rid of existing workarounds throughout the codebase that had to deal with this quirk.
Should avoid egregious values that would potentially alloc insanely large buffers (and likely fail to do so).
In the process, tweak the scale_factor computations when zooming so as to produce slightly less annoying behavior.
Get a Lua userdata wrapping a crengine LVSvgImageSource object
when long-press on a SVG image, and have crengine/LunaSVG render
it smoothly scaled to the requested size by ImageViewer.
This helps jumping to page when ToC chapters are short
and the bookmap page rows narrow.
Also fix crash when invoking BookMap and PageBrowser
on a PicDocument (considered DocLess by Statistics).
This is mostly needed because opening the menu with swipe
is actually done by handling a pan south event, and so the
final swipe event is another event, that is then handled
by TouchMenu, which would straight away close itself.
(In which case we return a checkerboard pattern).
ScreenSaver: Make sure the choose image/folder/document settings
report what the code actually does on empty settings...
The setting is handled like all other bottom menu options
but, as it's really not useful and its target audience is
very limited, make it not shown in the bottom menu, but
available via another button in the (also quite not useful)
Word Expansion fine tuning widget.
Long story short: the LeaveStandby event is sent via `tickAfterNext`, so if we tear down the plugin right after calling it (in this case, that means that the very input event that wakes the device up from suspend is one that kills ReaderUI or FileManager), what's in UIManager's task queue isn't the actual function, but the anonymous nextTick wrapper constructed by `tickAfterNext` (c.f.,
https://github.com/koreader/koreader/issues/9112#issuecomment-1133999385).
Tweak `UIManager:tickAfterNext` to return a reference to said wrapper, so that we can store it and unschedule that one, too, in `AutoSuspend:onCloseWidget`.
Fix#9112 (many thanks to [@boredhominid](https://github.com/boredhominid) for his help in finding a repro for this ;)).
Re: #8638, as the extra debugging facilities (i.e., ebb81b9845) added during testing might help pinpoint the root issue for that one, too.
Also includes a minor simplification to `UIManager:_checkTasks`, and various other task queue related codepaths (e.g., `WakeupMgr`) ;).
Titlebar button navigation in menu, including ListMenu and MosaicMenu in FileManager, History, Favourites and Shortcuts.
Hide show password checkbox in non-touch devices
* Disable all non power management related input during suspend. (This prevents wonky touch events from being tripped when closing a sleep cover on an already-in-suspend device, among other things).
* Kobo: Use our WakeupMgr instance, not the class.
* WakupMgr: split `removeTask` in two:
* `removeTask`, which *only* takes a queue index as input, and only removes a single task. Greatly simplifies the function (i.e., it's just a `table.remove`).
* `removeTasks`, which takes an epoch or a cb ref, and removes *every* task that matches.
* Both of these will also *always* re-schedule the next task (if any) on exit, since we can have multiple WakeupMgr tasks queued, but we can only have a single RTC wake alarm set ;).
* `wakeupAction` now takes a `proximity` argument, which it passes on to its `validateWakeupAlarmByProximity` call, allowing call sites to avoir having to duplicate that call themselves when they want to use a custom proximity window.
* `wakeupAction` now re-schedules the next task (if any) on exit.
* Simplify `Kobo:checkUnexpectedWakeup`, by removing the duplicate `WakerupMgr:validateWakeupAlarmByProximity` call, now that we can pass a proximity window to `WakeuoMgr:wakeupAction`.
* The various network activity timeouts are now halved when autostandby is enabled.
* Autostandby: get rid of the dummy deadline_guard task, as it's no longer necessary since #9009.
* UIManager: The previous change allows us to simplify `getNextTaskTimes` into a simpler `getNextTaskTime` variant, getting rid of a table & a loop.
* ReaderFooter & ReaderHeader: Make sure we only perform a single refresh when exiting standby.
* Kobo: Rewrite sysfs writes to use ANSI C via FFI instead of stdio via Lua, as it obscured some common error cases (e.g., EBUSY on /sys/power/state).
* Kobo: Simplify `suspend`, now that we have sane error handling in sysfs writes.
* Kobo.powerd: Change `isCharging` & `isAuxCharging` behavior to match the behavior of the NTX ioctl (i.e., Charging == Plugged-in). This has the added benefit of making the AutoSuspend checks behave sensibly in the "fully-charged but still plugged in" scenario (because being plugged in is enough to break PM on `!canPowerSaveWhileCharging` devices).
* AutoSuspend: Disable our `AllowStandby` handler when auto standby is disabled, so as to not interfere with other modules using `UIManager:allowStandby` (fix#9038).
* PowerD: Allow platforms to implement `isCharged`, indicating that the battery is full while still plugged in to a power source (battery icon becomes a power plug icon).
* Kobo.powerd: Implement `isCharged`, and kill charging LEDs once battery is full.
* Kindle.powerd: Implement `isCharged` on post-Wario devices. (`isCharging` is still true in that state, as it ought to).
* Handle said rotation shenanigans inside ScreenSaver & ScreenSaverWidget, which allows a more targeted approach; and prevents said rotation from affecting other widgets. (Also, gets rid of duplicated code).
* Handle the corner-case or exiting early from a "keep on screen for n sec" screensaver better, by unscheduling the extra refresh, since an early tap took care of that already.
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
readerhighlight: non-touch support
focusmanager: fix same type container share same selected field
radiobuttonwidget: non touch support
sortwidget: non touch support
openwithdialog: fix layout contains textinput, checkboxes added to layout twice
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
(1) ButtonDialogTitle: new method setTitle()
(2) OPDSbrowser
-use setTitle() instead of open/close ButtonDialogTitle (no visual changes to the download dialog)
-reduce logger.info output to avoid flooding crash.log
(3) CloudStorage
-enhance download dialog (similar to OPDS), much optimized code of downloadFile
-fix a bug: cannot create new folder or upload files to the root of the Dropbox storage
Instead of using the depth configured in Book map, start
with max depth, and allow decreasing (and reseting when
at 0) with long-press on the (i) top left icon.
widget
Since we only use a single icon, we have to take a few shortcuts:
* The icon itself is computed based on the average of both batteries.
* The actual value is the sum of both batteries.
* Much like everywhere else, charging means the *aux* battery charging
(i.e., connected to a power source).
Re #8741, which does the same for ReaderHeader.
- New button Go to bookmark in Bookmark details dialog.
- New button Latest bookmark in the popup menu.
- Empty input box for new note, new button Paste to
paste highlighted text (auto-text).
- Allow duplicated bookmarks to avoid orphaned highlights.
- TextBoxWidget: fix enabled up-arrow on empty box in InputDialog.
New real terminal emulator, replacing the old plugin.
The emulator is basically a vt52 terminal (enriched with
some ANSI-sequences, as ash, vi and mksh don't behave well
on a vt52 term).
So far working: ash, mksh, bash, nano, vi, busybox, watch...
The input supports: tab-completion; cursor movement;
backspace; start of line, end of line (long press);
page up, page down (long press).
User scripts may be placed in the koterm.koplugin/scripts/
folder, aliases can be put in the file aliases and startup
command in the file profile.user in that folder.
For consistency with BookMap and PageBrowser widgets
where swipe south (the usual gesture to quick close)
can't be used for closing and we had to use any
multiswipe instead, allow any multiswipe to close
these other fullscreen widgets too:
Menu (ToC, Bookmarks), KeyValuePage, ImageViewer,
BookStatusWidget, ReaderProgress, CalendarView.
- FocusManager: allow managing sub widgets by merging their
"layout" in the main one; make "press" support simpler by
handling it as a fake tap event at the center of the
focused widget.
- Setup gestures on non-touch devices for new focus manager.
- ToggleSwitch: use child layout.
- ButtonProgressWidget: use child layout.
- SpinWidget and DoubleSpinWidget: add keyboard navigation.
## Background
`pathchooser.lua` does not support non-touch device to choose file or folder due to those device cannot generate long press event.
## Choose File
Non-touch device can select file in list, it is good enough to choose file without long press to confirm.
## Choose Folder
`pathchooser.lua` changes the label of current directory `.` to `Long-press to choose a folder`. It is user friendly, while for non-device, it is a very good place to let user tell the system I want the current folder to be chosen without extra long press.
Implement it on the Kobo Sage, for the PowerCover
TouchMenu: Display auxiliary battery status
Kobo: More accurately report the PowerCover's charging status
i.e., try to actually figure out if the auxiliary battery is charging
instead of just checking the reader's battery (because that one will
often swap between the charging and discharging state as it drains the
aux battery...).
PowerD: Use a cached timestamp when doing battery pull checks
Fix various issues with stacked Wikipedia lookup results,
and follow up lookups when invoked from Wikipedia lookup
history (where going to a search for language LL would
not use language LL when hitting "Full wikipedia").
Fix very-long-press in DictQuickLookup that should allow
doing the query to the other domain (dict/wiki) instead
of the current one.
Similar to 7dea979.
