Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Rework b66d0be3 and 6205f260 by making that simpler
to comprehend:
- If interruption or search result window is shown in
less than 3 secondes: no specific tweak, a tap outside
will dismiss everything instantaneously.
- If done after 3 seconds: show the interruption or result
window, and discard input for a few 100ms.
- UIManager:discardEvents(): increase a bit default delays.
Restore feature removed in c98dfef7: tap on title
to set dict of current result as a preferred dictionary
for this document.
Changes from former implementation:
- trust sdcv for ordering, instead of doing it ourselves
by looking at the results (which didn't always work)
- allow setting multiple preferred dicts
- order of preference is shown with a number as a prefix
to the dictionary name in the title
- taping again allows removing it from preferred dicts,
and taping again allows setting it back as the first
preferred dict
platform: do not pass a directory on the command line.
The home directory will be properly set by Device.home_dir.
It was sometimes crashing when opened with no args.
Fixes: #7049
* Flush mode to settings ASAP when an unrelated option updates the mode.
Fixes, among other things, *enabling* the progress bar while the status
bar is hidden: this showed it, but kept mode as "off".
* Don't stomp on the current mode when toggling the progress bar.
And *always* pop the status bar back up to see the difference, even if
it's hidden.
This used to be done only when *enabling* the progress bar.
* Don't try to expand a screensaver message without any special tokens
* Don't needlessly nil the background when show_message is true
Honor the actual nil background setting, now that we've got one.
Also, only clear covers_fullscreen with no background *and* no widget.
* Support special tokens outside of ReaderUI. Because the undocumented
"Oops, I'll use the fallback otherwise" was extremely not
user-friendly.
If you're *extremely* unlucky, the scheduled check might run *right*
after a wakeup, before the network interface is up. So, you have a
previously stored packet count, but the new one is nil. Boom.
By having the same DoubleSpinWidget launched when
hitting "..." on any of Top margin or Bottom margin
progress bars.
DoubleSpinWidget: remove blank space when no info_text.
Add UIManager:discardEvents(), to allow dropping events
for a period of time.
Default duration of 600ms on eInk, 300ms otherwise.
Used when showing the dict result window, so that a tap
happening just when it's being shown won't discard it.
Used with Trapper:confirm()/:info(), to avoid taps made
in a previous processing to dismiss (and so, select the
cancel action) a ConfirmBox not yet painted/visible.
Don't cleanup input text as much when entered manually
(or when it's sane) than when coming from book text
selection.
This may allow looking up words like "-suffix", or
do more precise Wikipedia queries.
Brainfart from 6162c287e8
Forgot to zap the original UIManager:show(), so we were stacking two
identical widgets on top of each other, which obviously affected alpha.
Re #7029
- Rework widget layout to avoid implicit (and wrong)
sizing, using proper padding/margins and correct
measurements of components.
- Adjust lookup word font size so it's not smaller
than the definition.
- Tweak small window positionning: keep it centered
if possible, only move it to keep the highlighted
word shown when we can.
- Large window: adjust to screen size correctly,
leaving room for footer.
- Always have a "Close" button at bottom right.
Former always displayed button "Follow link" will
be added as a 3rd row in the rare case we select
a word in a link.
- Replace "tap on lookup word to edit and redo the
query" with an icon on the right: tap on it to
edit the queries word, long-press to edit the
current result word. Only close the current dict
window when lookup is launched.
- Remove feature "tap on title to set current dict
as the default dict for this document", as it didn't
really work, and it was bad UX.
If interrupted quickly just after lookup launch, don't
display anything (this might help avoiding refreshes
and the need to dismiss after accidental long-press
when manipulating the device).
- InfoMessage: add an option show_delay.
- MovableContainer: avoid possible crash when
not yet painted.
- ReaderDictionary: use show_delay=0.5 instead of
scheduleIn(0.5n...) (a5b133da) as we need the
InfoWidget to be known to UIManager to catch tap
and allow interrupting lookups properly.
- ReaderDictionary: rework handling of no_refresh_on_close
(6162c287) with proper regions comparisons
Drop the use of crengine's getWordFromPosition() which
is a bit unreliable: it may returns wrong coordinates,
or words from far away in the book (ie. when holding
in the margins).
Rely only on the robust getTextFromPositions() that
we already use for multi words selection.
Having good coordinates allows refreshing a smaller region
(the higlighted word, or the 2 lines if hyphenated).
* Modernize jit syntax
It's built-in, no need for a require anymore.
* Flag Android should_restrict_JIT again
It's mildly helpful at putting off the inevitable.
(very, very, very, very mildly).
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/281
That way images can be made to work in a more generic, portable manner, such as:
```
return function(html, dict_path)
html = html:gsub('<rref[^>]*>([^<]*%.jpg)</rref>', '<img src="'..dict_path..'res/%1">')
return html
end
```
Cf. <https://github.com/koreader/koreader/issues/6056>.
* Don't paint invisible background-colored rounded corners
Made obvious when testing #7042
* Only enforce a highlight radius on buttons that don't already set a
custom one ;).
(Mostly, square buttons with a 0 radius ^^).
ffi/blitbuffer already handles radius being nil, which suits us just fine
:)
* Implement proper alpha-blending of SVG icons
Also, instead of doing that every time, cache a pre-composited version
that matches the screen's BB type.
This is faster, and also has the advantage of making icon highlights
behave.
Jot down a few notes about corner-cases or future improvements, e.g.,
dimming icons on non-white backgrounds, and nightmode with color icons.
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
* Avoid the Lua string copies when compressing/uncompressing the bb
thumbs
* Delay the statement reset so that the pointer returned by the BLOB
query is actually usable ;).
* Re-use a ZSTD decompression context
* Store date & mtime for successfully extracted documents
c.f., 10477501f9 (r44914917)
* Switch to user_version pragma to handle DB schema versioning
* Update file size/date on *each* extraction attempt.
@poirez-z raised a good point, this ought to be useful to deem a file
re-parseable after an update.
* Remove xutil
Functionality has been moved to ffi/zlib & ffi/zstd
* Preserve settings when migrating the BookInfo DB
* Warn via InfoMessage that the DB was updated
* Only store the series name in series, and move the index in series_index
(Column names chosen to match Calibre's).
* Handle the new series_index column in BookInfo consumers
* This allows us to get rid of the code that stripped empty decimals
from series index in *most* places, since it's now a real Lua
number, and the string formatting library does that magic on its
own.
* stride is now a size_t
On some platforms, that's 64 bits, which means it's no longer
automatically converted to a Lua number to avoid precision loss.
Do that ourselves, because lua-serialize doesn't know how to handle an
uint64_t cdata ;).
This way we still get the passed/expected actual values in Busted's
output
Which helps not make this any more maddening than it already is to
update...
* Make switching *back* to the default DPI via auto actually work
properly.
eg., by actually setting DPI back to defaults, and clearing the override
flag.
* Bump base to pickup https://github.com/koreader/koreader-base/pull/1258
* ReaderFooter:
* Honor the global twelve_hour_clock setting, instead of
duplicating a local one.
(Re #6969)
* os.date is a thin wrapper around strftime, so we might be able to get
away with some not-quite-standard extensions...
These are *definitely* supported on Linux, but are *NOT* the glibc
extension (that'd be e.g., %-I), so, hopefully, they're somewhat
portable...
They are also supported on BSD/macOS.
They are *not* supported by the MS UCRT. That means MinGW-w64, too.
This *appears* to be supported on current Bionic (it might even support
said glibc format altering extensions).
* And of course, Windows is terrible, so, make this terribly ugly to not
break it there...
* Turns out BSD also supports the dash trim format extension, so, leave
the trimming to the libc, and handle the special-casing in a way that
doesn't create stupid locals.
* Random unrelated cleanup ^^.
(https://gitter.im/koreader/koreader?at=5fd24be492aa1c4ef5d11f31)
* Update the testsuite
(Because the default used to be 24h clock).
Changed the default to 24h clock ;p.
* Explain why we don't try to fix it in Lua
Avoid crash with RTL UI after options we moved.
Swap Zoom direction items when RTL UI.
Also don't check show_func when sizing the names
on the bottom menu, to avoid icons moving or
resizing when toggling options.
FileManager:init is called by FileManager:reinit, which caused duplicate
loads. Those can't be useful, (for example to re-load a modified plugin
on runtime), as PluginLoader:loadPlugins memoizes loaded plugins.
* ReaderDictionary: Don't refresh when dimissing the lookup info
InfoMessage
Re #6932
* Fix dict_largewindow in Landscape
Have to leave some room for the UI chrome
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
Change the text in the button from a hypen (-) to a
Unicode minus size (−, U+2212). This is the same width
as the + sign.
The NaturalLightWidget and FrontLightWidget controls
already use minus signs in this way.
nextTick was too early ;).
Prevents small hitches when turning the page for the page where this
triggers.
Apply the same trickery to the Stats DB insert, even if that one probably
had a much smaller impact.
* Warn on restart if the startup script has been updated, because a restart will not reload it.
* Also warn right after the update if it contained a startup script update...
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
Some stuff was still hacked on manually instead of trusting the widget system to do things right, which it does, if you update the right stuff at the right time the right way ;). *This Is The Way*.
Fix#6893 (and address https://github.com/koreader/koreader/pull/6878#discussion_r523411883, because it was indeed redundant ^^).
Includes a bonus fix for a number of (footer) settings not being applied immediately in PDFs.
By essentially dropping the whole XHTML block, instead of trying to salvage each and every tag one by one as we did before.
Also, as that's usually the result after broken parsing, handle nil URLs slightly better in the frontend, so that they get caught/reported properly instead of doing nothing and/or crashing half the time.
Add option to hide (skip) non-linear fragments, only working
in 1-page mode. Tweaks mostly to footer, toc and skim code
to make it clear(er) which pages belong to linear or non-linear
fragments.
* Don't attempt to restart Nickel when asking for a reboot/shutdown
Use a magic exit code to ID those cases.
* Limit this to Kobo, to avoid breaking potentially existing assumptions
with other platform's startup scripts
In case of no environment language. I suppose that doesn't tend to happen much in the wild since I added the offending code early in 2020. ;-)
Fixes <https://github.com/koreader/koreader/issues/6873>.
* Use a CRe set* method when toggling nightmode
This ensures it gets flagged as add_reset by the call cache, and that
CRe will actually re-render, as it's necessary if nightmode_images is
enabled (the default).
Fix#6845
* Prevent ReaderHighlight:onTap from running ReaderHighlight:clear when
it's unnecessary.
Avoiding a clearSelection call in CRe that could invalidate the cache
and cause unnecessary redraws.
* Don't store empty highlight arrays when all HLs on a page have
been deleted
- Lcd devices won't use the SurfaceView, just the good old native content/window (except AndroidTv and ChromeOS)
- All android dialogs will be presented with Material Design on recent devices.
- Added an option to device settings to manage application battery optimization.
- Permissions that require the user to go to a settings page will be presented with a native android dialog.
- bump android-luajit-launcher
- Changes under the hood: koreader/android-luajit-launcher#257
2 new widgets:
- QRWidget, that's like an ImageWidget, but with a text property that will be converted to a QR code ;
- QRMessage, that's like an InfoMessage, but shows the message as QR code.
Moreover, it adds the ability to export QR codes to the text editor.
1 new plugin:
- Generate QR codes from clipboard
Changes to text editor plugin:
- Add the ability to export QR codes.
Have ReaderBack be the sole handler of onBack.
Add 4 mutually exclusive options for the Back key,
to avoid ReaderLink and ReaderBack location stacks
from interfering (ReaderBack's stack being always a
superset of ReaderLink's stack).
So, remove "Enable back history", which is replaced
by Back option "Go to previous read page".
Fix a few possible crashes and inconsistencies (when
zoom, scroll or reflow have changed) with ReaderPaging
and ReaderView when restoring previous page/view.
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* When auto_refresh_time is enabled, don't actually refresh anything when the footer is hidden.
* Fix a bunch of state tracking related to height computations, meaning `getHeight()` is now actually accurate, always, and we don't need shitty workarounds anymore.
* `footer_container.dimen.h` *includes* the progress bar, so, never reset it to 0 unless the progress bar is disabled (some `settings.progress_bar_position` codepaths were mistakenly doing just that).
* More aggressively set/reset `footer_text.height` (not sure this one makes much of a difference, and/or if it's actually useful at all, but, the tracking was already there, but hella inconsistent, so, just fix it).
* Honor `settings.reclaim_height` in other bits of code that were only checking `footer_visible` to figure out the visible page area.
* Ask ReaderView to update the `visible_area` *now* when toggling the footer's visibility (for ReaderPaging).
* Fix initial tap on the H2O
There's no slot 0, so make sure the initialState doesn't get confused by input's init data that otherwise assumes the main slot is 0
* When closing a widget, stop sending setDirty call for widgets lower on
the stack as soon as we hit a full-screen one.
This prevents inflated refresh regions when closing stuff on top of a
stack of multiple covers_fullscreen widgets (i.e., InfoMessages on top
of the Favorites page on top of the FM, for instance).
And, while we're there, also prevent getting infected by dithered
widgets when they're below a non dithered full-screen widget (the exact
same examples works, if the underlying FM page requires dithering).
* handle onDestroy
we need it if killed by the system (ie: battery optimizations or OOM)
we need it to exit the lua VM when we call finish() from Kotlin
This prevents us for being trapped into a zombie state
On pocketbook, update modes are not as clear cut due to overall
chipset and kernel version mess. Inkview solves this by always
using the slowest (and safe) GC16 waveform. We now do that too
by default.
Slow updates suck though, so there's now a menu entry to configure
it for speed (with mild artifacts at best, kernel panic at worst).
This is a generic interface (any eink Screen can announce support).
The driver may interpret the slow/fast range however they want.
On devices where the event time is the uptime (time since
boot), we don't need to trash it and use TimeVal:now()
and lose precision. We can still use these times for
relative delays and durations computations, which is
mostly all we use them for.
We just need a real clock time in GestureDetector for
two timers (long-press and double tap), where we do
the event time type detection on the first event, on
all devices.
This allows for better energy efficiency (no more 50Hz tick poll),
as well as lower input lag / higher precision - touch events are
native linux ones.
In addition, auto off/suspend plugin is used in this mode, as we need
to trigger (timed) sleep / poweroff on our own, since the OS ones
will no longer work whenever koreader has focus.
This is for rooted devices only, and possibly somewhat FW
specific, so enabled only on PB740-2 where it's reasonably tested.
* Update the data collection format & handler to make it much less tortuous
* Update the pagecount & resync the stats on document layout changes
* Update the database schema to allow doing most queries against a SQL view that rescales the collected data to be accurate regardless of document layout (thanks to @marek-g for the SQL magic ;)).
* Add a "reset stats for current book" entry in the list of reset options, one that won't horribly break stats in said book ;).
* Fixed a couple of resource (SQL connection) leaks (in ReaderStatistics:getCurrentBookStats & ReaderStatistics:getCurrentBookStats).
* Flush stats to the DB on periodical metadata saves.
* Minor cosmetic tweaks to the code
* PB Crash Screen:
* We don't actually support the "tap to restart now" behavior, it's a
plain sleep.
* Remove CBB toggling leftovers missed in #6696Fix#6780
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
Previously items weren't actually moved, but swapped with the item
at their new position. That works well if you move an item for one position.
However, if you move an item over several positions, you won't get the
expected behaivor.
And to make it the screensaver image.
Done on two-finger large diagonal tap on multitouch
devices (like regular ScreenShoter) as long-diagonal
swipe is reserved for panning.
Fallback to tap in the bottom left corner on
non-multitouch devices.
Includes:
- (Upstream) various unimpacting changes to keep in sync
- (Upstream) Fix issues with legacy text rendering
- (Upstream) FB3/DocX/ODT: get lang and description metadata
- (Upstream) remove some global settings, make them per-doc
- TextLang, hyphenation: add Armenian, Friulian, Piedmontese,
Romansh, Zulu and Brazilian Portuguese.
Also make cre the prefered engine for .xhtml (over MuPDF)
and for .xml (which might be HTML).
* In icons mode, just use two different icons to display Wi-Fi status
* Enable Wi-Fi status icon on Kobo & Cervantes, too
* Refresh footer on (dis)connect if the Wi-Fi status item is enabled
The differences between Allwinner/MXC matter surprisingly little in practice, it's not even worth
it to bother the base mxc driver with it. Instead, frontend can make some informed choice by
probing for the hardware and tweaking requested device caps accordingly.
On Allwinner B288, we disable both hwrot (done in software in kernel and terribly, ie not worth it)
and hwinverse (no support whatsoever). On NXT we'll keep both on, as the kernel driver seems
to be using the hardware properly .
In the current KOReader version the folder shortcuts are sorted by date of addition. When a user has many folder shortcuts (like I do blush ) they are easier to find again when sorted alphabetically.
As things were, when I activated USBMS, any bookmarks recently added and not yet stored in the sidecar file would be lost after returning to the reader. These changes fix that.
This pull requests aims to provide convenient way to zoom in comics. The idea is when user holds/double taps (not decided yet) on a manga/comic panel, it gets cut out from the rest of the image and zoomed. More details in koreader/koreader-base#1148. Depends on koreader/koreader-base#1159
CBB now handles nightmode correctly (by deferring to Lua), so we no longer
need to do monkey dances about disabling it when hw invert is missing.
canUseCBB cap is resolved by generic device re-configuring blitbuffer
on the go, so as to avoid repeating the same thing in every device driver.
The dev setting can now flip cbb on the go, so one can gloat at the near
meaningless perf difference - 2Mp draw is 15ms Lua / 10ms C on 1GHz Cortex A7.
* Uses bunch of new plumbing in base to configure screen rotations in hardware (koreader normally does this via blit buffer rotations, except for android).
* Some PB specific kludges that used to pollute core/framebuffer_linux are brought into PBs frontend driver.
move state change event to higher level function so it will be called after powerd.is_fl_on is updated.
makes _setIntensity redundant so get rid of it
obsoletes #6667
Includes:
- Update German hyphenation patterns
- (Upstream) Adds ODT (ODF) format support
- TextLang, hyphenation: add Basque, Croatian, Esperanto,
Estonian, Georgian, Latvian, Lithuanian, Macedonian,
Occitan, Welsh; update Bulgarian, Irish, Portuguese,
Slovak, Dutch, Norwegian, Spanish; update hyphen min
for Czech, English, Greek; fix Romanian and Ukrainian
pattern file names
- HyphMan: adds HyphMethod::getLeft/RightHyphenMin()
- epub.css: update HR default style
- fb2.css: keep <date> in main text left-aligned
- getRenderedWidths(): inline-block and table fixes
- CSS: avoid style hash mismatch when serializing content:''
- Tables: re-order row groups when necessary
- XML parsing: don't drop trailing text
- HTML parser: tweak implicit head/body insertion code
- Fix text search failure when blank at start or end
readertypography.lua: some cleanup by removing the first
table listing hyph dicts, and including their filenames
in the second table so we can build the first table
dynamically. Also fetch hyph left/right min limits from
crengine to not have to duplicate them here and keep them
in sync.
css_tweaks.lua: for in-page footnotes, switched from
"-cr-only-if: epub-document" to ": -fb2-document"
("not" FB2 documents), so these tweaks also work with
DocX and ODT footnotes.
Also included in base bump:
- KOPTContext: add comic panel detection function/additional
leptonica declarations
- Forcibly disable docs when building giflib
In the "Set footnote popup font size", allow toggling
between setting a relative (to the document) font size
and setting an absolute font size (that won't change
with the document font size).
Since 8815cbe0 and getSafeFilename() taking additional
parameters, and :gsub() returning multiple values,
filesystem type wasn't really checked and replacements
were not ensured, so saving articles like "Portal:Stuff"
failed on VFAT devices as ':' wasn't replaced.
After the awesome work made by @ezdiy:
- Remove empty dir from release zip
- Remove misc files (txt, md, html, gif) to prevent displaying them in PB library
- Do not asociate executable files (sh and py for the moment), just openable files
- Rename the font sample from html to template (to prevent wiping it during clean)
* Only ask to start an USBMS session when plugged into a USB host on Kobo
Also, fix a typo that broke plugout detection on cervantes
* Bump base (necessary input/KoboUSBMS changes)
https://github.com/koreader/koreader-base/pull/1183
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
Adaptively pins the auto-standby UI lock. When frequent input
from user is observed, we'll prevent for increasingly longer
periods of time, and revert back to more aggressive standby
with infrequent input (infrequent taps when reading a book).
A BackgroundRunner plugin instance will stop running
(rescheduling a check every 2 seconds) when there is no
(or no more) job to run.
Clients of this service now have to emit an event after
adding a job into PluginShare.backgroundJobs, so an
already loaded but stopped BackgroundRunner can notice
it and start running again.
Out of the box, it behaves exactly as native pocketbook apps should, ie aggressive
standby, but no freezing at operations in progress.
Config UI will be done via koplugin that will also do adaptive standby. This is
because the API is now device independent (albeit PB is the only implemented user).
* Be even more defensive around KoboUSBMS handling in the startup script
And add some more logging. To the log before a session, to the syslog
after, because we can't be sure onboard is viable.
* Display a short version string straight in the Version label
* Move system statistics inside the Help menu
* Move Version inside Help
* Bump base
https://github.com/koreader/koreader-base/pull/1173
* Enable i18n in KoboUSBMS
* Rejig the "No confirmation" USBMS setting:
In now *only* affects the USB plug in event.
The menu entry will never show the popup (clicking on it should already
be confirmation enough, that, yes, we really would like to do that,
please ;)).
Also, enable said plug in behavior on Cervantes, too ;).
* Add an option to disable USBMS entirely
* Bump base
https://github.com/koreader/koreader-base/pull/1170
(Not sure how and with what this check works and if
we still get such kind of items, but avoid a crash
when item2.pos0 exists but item1.pos0 does not.)
It's only needed by all_at_once, but we were skipping it if nothing or
only a single mode was enabled.
It lead to desync w/ the settings, or a crash.
Fix#6561
Includes:
- Revert "FB2: don't draw cover in scroll mode"
- (Upstream) FB2: fix coverpage drawing in scroll mode
- FB2 footnotes: only merge run-in when next is erm_final
- fb2.css: use OTF tabular-nums for footnote numbers
- Text: ignore ascii and unicode control chars
- Fix HR positionning when floats involved
- writeNodeEx(): minor tweaks
- OnTagClose(): add self_closing_tag parameter
- HTML format detection: accept HTML5 doctype
- HTML parser: rework Lib.ru specific handling
- HTML parser: new more conforming implementation
- HTML parser: ensure foster parenting inside tables
Also includes:
- SDL: don't bypass X11 WM compositor
* Boundaries are now detected both when paging forward and backward.
Fixes potential false-negatives in the chapter boundary heuristic code, as mentioned in https://github.com/koreader/koreader/pull/6528#issuecomment-678610188 ;).
* Tweaked ReaderFooter to not repaint ReaderUI when it's unnecessary. (toggling/cycling it on a page with significant image content would flash the full screen).
* Only flash the first time a page w/ significant image content is shown. (Menus, among other things, could otherwise re-trip the flash).
* Add an option to *always* flash on chapter boundaries
* Optionally, in flash on chapter boundaries mode, also flash on the *second* page of a chapter.
(There's often a large river at the top of the page on a chapter's first page)
* In CRe, request a flashing update when there is significant image content on the page.
* Register all refresh rate related options in Dispatcher, making them available in Gestures & Profiles.
when rotation was caused by a gesture the gesture settings were not flushed leading to weird state when the FM reinit reloaded the gestures plugin
discovered in #6530 caused by #6309
Includes:
- (Upstream) LVBase64NodeStream: fix possible segfault
- (Upstream) Fix getting encoding from HTML META tags
- FB2: also look for cover in <src-title-info>
- FB2: fix cover image colors
- FB2: don't draw cover in scroll mode
- TextLang: better linebreaks at em-dash (EN/ES/FR)
- TextLang: increase _lb_props static array size
FB2 footnotes style tweaks: avoid gap above first footnote,
caused by the title bottom margin collapsing into it.
This change to the parser in `cloudstorage.lua` adds support for the [Apache WebDAV module][1]
It was manually tested using the [bytemark/webdav][2] docker container.
I developed this in Windows, with a docker container that hosted an extracted AppImage and a VNC server that I viewed using a VNC client.
I will write up my work flow at a later point.
Changes have not been tested against other webdav servers (what was this originally tested against?). Please could someone test against other webdav servers?
I also noticed a logic inversion error where we were looking for a slash at the end of the URL and if it exists, then we explicitly set `has_trailing_slash=false` - so I fixed it to set to `true`. I had to do this so that we weren't visiting the URL without a trailing slash - apache sends back a 301 redirect with a `location` header with a trailing slash, if you don't put a trailing slash.
As a side note, I think we should consider replacing this regexp pattern matching parser with the [XML parser in the newsreader plugin[3]
[1]: https://httpd.apache.org/docs/2.4/mod/mod_dav.html
[2]: https://github.com/BytemarkHosting/docker-webdav
[3]: https://github.com/koreader/koreader/blob/master/plugins/newsdownloader.koplugin/lib/xml.lua
* deduplicate code on warmth/brightness swipes
if device has a small scale (e.g. warmth is going from 0..10)
* adjust warmth message
* use a smaller gesture sensitivity
* bump crengine: reworked hanging punctuation
* move setting management from ReaderTypeset to ReaderTypography
And fix initial handling of defaults being loaded as true/false
but needing to be saved as 1/0.
* fix luacheck
Add Set Frontlight/Set Frontlight warmth events to dispatcher. This allows users to set day/night profiles with different fl/warmth values as requested in #6444
there is no need to pass the caller rather just the table where the setting is located. passing the setting alone is not enough as sometimes it is nil and then you do not get a reference to its location
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
Witnessed with "L/R Margins": tapping on a button
sets the value to the preset table, by reference.
Tapping the -/+ fine tuning buttons was updating
these tables in-place, in effect modifying the presets.
It doesn't do so for the FM, so the inconsistency is confusing.
Plus, if you're actively using sticky rotation, saved rotations are
ignored anyway.
Re #6420
* Allow switching to SW dithering on a HW-capable device without that being lost on boot (and, worse, left in an undithered state).
* Make sure the automagic toggles between HW/SW in the Dev menu are properly saved.
Avoid conflicts having "In-page EPUB footnotes (smaller)"
affects FB2 documents that use "<a type=note>12</a>" which
would then get smaller if both tweaks are enabled (which
they are, by default).
Also switch "-cr-hint: strut-confined" from being set on "*"
to being set only on "body", now that it is inherited.
Footnote popups: add styles for some non-HTML FB2 tags,
so MuPDF can render them as expected.
