Previously items weren't actually moved, but swapped with the item
at their new position. That works well if you move an item for one position.
However, if you move an item over several positions, you won't get the
expected behaivor.
And to make it the screensaver image.
Done on two-finger large diagonal tap on multitouch
devices (like regular ScreenShoter) as long-diagonal
swipe is reserved for panning.
Fallback to tap in the bottom left corner on
non-multitouch devices.
In the "Set footnote popup font size", allow toggling
between setting a relative (to the document) font size
and setting an absolute font size (that won't change
with the document font size).
Since 8815cbe0 and getSafeFilename() taking additional
parameters, and :gsub() returning multiple values,
filesystem type wasn't really checked and replacements
were not ensured, so saving articles like "Portal:Stuff"
failed on VFAT devices as ':' wasn't replaced.
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
Witnessed with "L/R Margins": tapping on a button
sets the value to the preset table, by reference.
Tapping the -/+ fine tuning buttons was updating
these tables in-place, in effect modifying the presets.
Avoid conflicts having "In-page EPUB footnotes (smaller)"
affects FB2 documents that use "<a type=note>12</a>" which
would then get smaller if both tweaks are enabled (which
they are, by default).
Also switch "-cr-hint: strut-confined" from being set on "*"
to being set only on "body", now that it is inherited.
Footnote popups: add styles for some non-HTML FB2 tags,
so MuPDF can render them as expected.
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
dofile() wasn't enough to copy en_keyboard, as the references
to key popups would still be shared, and hacks to them (as
done by the FR keyboard) would be active on the EN keyboard.
Also, for the FR Keyboard:
- bring M key popup too when moving it to 2nd row.
- keep original ',' and '.' as on EN keyboard.
- add ';' instead of ',' as the added key, and let it have
some key popup too, with keys helpful when CSS editing.
Allows editing a CSS snippet to be applied to this
book only, without the need to create and edit
a User style tweak.
Allows copying any other tweak CSS by just taping
on it (and pasting into this with Hold).
Limit User style tweaks nb of items per menu page
to 6 (like we try to do for other tweaks menus).
This is a quick exploration into how the new Device:hasFewKeys() method could work to make things more usable on very limited devices.
In the reader, the right is repurposed to open the menu. Left in turn closes it.
The same principle is applied to ButtonDialog. This means you can select anything in principle, but once you go right you can't go back.
References <https://github.com/koreader/koreader/issues/4029>.
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
Using DoubleSpinWidget.
Also keep SpinWidgets open on Apply.
Added little trick: if widget has been moved, close
bottom config menu on next Apply to show more of
the book.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
- Add some style tweaks to allow displaying FB2 end notes
in-page too - and to allow showing them without a smaller
font size.
- Show footnote number in bold in popup footnotes.
- FB2 footnotes are no more rendered in-page by default
- In-page rendering can be enable by the added Style tweak
- FB2 footnotes can also show in footnote popup (with
some added not-so-nice CSS so MuPDF can render them
as crengine)
Just like what's been done previously for InfoMessage.
Also tweak 'other_buttons' option (not yet used anywhere)
to allow multiple rows of such other buttons.
Don't display a tofu glyph when meeting a tab (none of
our fonts have a glyph for it).
New parameter: TextBoxWidget.tabstop_nb_space_width,
that defaults to 8, to ensure tabstops in the usual
left aligmnent (or right when para is RTL).
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
The default left margin on blockquote and dd is `40px`, but unfortunately that doesn't scale. rem is calculated using a hardcoded16px, so em or % is the best compromise in this case.
PS If we assume 1em = 16px then 40px is actually 2.5em, not 1em. This reduction in indentation is mainly intended for the benefit of smaller E Ink devices.
Closes <https://github.com/koreader/koreader/issues/5859>.
OPDS catalogs may have search query capabilities. It is very usefull to find a
book in huge catalog, even when they are organized as directories. This commit
provides the possibility to add a %s mark in an OPS catalog URL, that would
trigger a search box when browsing the OPDS in koreader.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
It's extremely confusing, as it has nothing to do with calibre catalogs,
which are actual things the user can generate manually.
What it's using instead is actually a metadata cache in a flatfile db
that's always present, as long as "Send To Device" was used to upload
the content to the device.
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
MuPDF does not handle "text-align: justify" correctly on
RTL text: the last line is left-aligned, but it should be
right-aligned.
Not using justify makes it correctly right align the whole
text.
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Ellipsis was sometimes not displayed when text is right aligned,
because width was not updated with ellipsis size.
bump base/xtext: fix truncation ellipsis position in bidi text
so it stays nearer to previous logical order char, instead of
sometimes being thrown away to start or end of line.
- Alias everything to Bidi.nowrap() when in LTR UI, as using
LTR isolates seems uneeded when already LTR.
- Better wrapping of RTL filename by using auto direction and
LTR-isolating only the suffix so it's always on a side.
- menu.lua: handle bidi_wrap_func outside getMenuText(), which
may be used in other contexts.
- Add BD.filepath() and BD.dirpath()
- bump crengine: (Upstream) DocX: fix paragraphs with single hyperlink
- bump fribidi to 1.0.8 (for nested isolates fix)
- xtext.makeLine(): return no_allowed_break_met=true when that
happens, so we know the line breaks inside a word.
TextBoxWidget: add forgotten property (when use_xtext=true) when no
line break opportunity was found: has_split_inside_word=true.
(Only used by CoverBrowser Mosaic mode to make nicer text covers
by reducing font size when that happens.)
A few fixes and enhancement related to bold text:
- When using bold=true with a regular font, use its bold
variant if one exists (can be prevented by manually
adding a setting: "use_bold_font_for_bold" = false).
- When using a bold font without bold=true, promote bold
to true, so fallback fonts are drawn bold too.
- Whether using a bold font, or using bold=true, ensure
fallback fonts are drawn bold, with their available bold
variant if one exists, or with synthetized bold.
- When using a bold variant of a fallback font, keep using
the regular variant as another fallback (as bold fonts
may contain less glyphs than their regular counterpart).
- Allow providing bold=Font.FORCE_SYNTHETIZED_BOLD to
get synth bold even when a bold font exists (might be
interesting to get text in bold the same width as the
same text non-bold).
- Use the font realname in the key when caching glyphs,
instead of our aliases (cfont, infont...) to avoid
duplication and wasting memory.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Use some HorizontalSpan for padding between key and value,
instead of prepending a space to the value text (which
won't work as expected if value text is RTL, as it would
be put on the right side of screen).
This adds a new separate Romanian keyboard layout, with popup support.
- Functional buttons are translated.
- Pages 5&6 contain 3 groups of characters (I tried my best to group them logically):
- On the left: traditional Romanian cyrillic pre-1850s
- On the middle latinised forms from 1850s onwards
- On the right modern diacritics from 1900s to today
- Pages 7&8 add only large double quotes and section/paragraph mark.
- Popups are only avalable for most common diacritics. Swipe up for circumflex, swipe down for breve.
I can really call this the most complete though-the-ages Romanian keyboard. :)
The japanese keyboard being taller than the others, when
switching to/from it from/to another layout:
- re-init InputDialog for proper sizing and positionning
- refresh the whole screen, to remove any trace of
a previous taller keyboard
Also add calls to :free() here and there to free keyboard
keys' TextWidgets' XText C objects without waiting for GC.
The korean keyboard wraps InputText and overrides some
of its methods to process input in some specific way.
When switching to another keyboard layout, the original
methods need to be restored.
* Switch the last few remaining icons to true glyphs
(Del/Backspace & Enter).
Also, allow a glyph to be rendered in (fake) bold, and use it for Enter.
* Update fonts
Pickup the tweaked nerdfonts for the backspace symbol
Follow-up to #5583.
* Add separate Cyrillic/Russian keyboard
* And remove that from English
* Update French keyboard (is easy)
* Remove yahzhert, that was just a double of QWERTY
* Update Spanish keyboard
* Reduce Japanese to 4 layers and add globe
* Reduce Korean to 4 layers
* Reduce Greek to 8 layers
- height_adjust: if true, reduce height to a multiple of
line_height (for nicer centering)
- height_overflow_show_ellipsis: if height overflow, append
ellipsis to last shown line
(Implemented in both use_xtext and legacy code path.)
Use them in Menu.lua to clean up/shorten the code used for multiline
menu items by delegating the work to TextBoxWidget, or using
TextWidget when we end up needing only a single line.
Alternative code to size, split lines and draw text with
the help of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
- alignment_strict: prevent the inversion of the specified
alignment= that is done when a paragraph direction is
set or detected as RTL.
Also: fix possible memory leak (present even when not using xtext)
by calling :free() in onCloseWidget() like it's done in ImageWidget.
Alternative code to size and draw text with the help
of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
* Unify battery meters look'n feel
Switch to proper (vertical) battery icons (one per 10% steps).
Fix#5535
* Bump fonts (https://github.com/koreader/koreader-fonts/pull/7)
Because we need the new symbols from nerdfonts ;).
(used by bookmarks list and classic file browser)
When text is too long or line too tall:
first: we try to decrease the number of lines (eg from 3 to 2 and from 2 to 1 line)
second: when 1 line is too tall, we try to decrease font size (-1)
And at the end we try to add or remove chars to better fit text.
Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
* Don't break `doc_pages` updates when it's completely disabled. (c.f., the commit's comment, doing it on every page turn seems a bit overkill, but I get that it's probably done that way because it was easier ;)).
* Detect the empty footerTextGenerator properly in `_updateFooterText` (it's `""`, not `nil`).
* Abort `_updateFooterText` early when the footer is invisible (and has been for a while/ever, i.e., when not requesting a repaint, like a mode switch would).
* Never send `SetBottomPageMargin` events twice.
* Minor tweaks to touchmenu & configdialog to avoid useless repaints (don't redraw the reader/fm unless we absolutely need to).
* Make sure we show the progress bar alone instead of nothing when disabling the last enabled mode in the menu.
Tap any part of screen to toggle bottom buttons visibility.
Swipe south to quickly close it (as long as image is scaled
to fit, and there's no need for panning).
And a couple bugfix this unearthed:
* Always set the default as the *current* value, no matter what (by chance, this was not an issue for margins).
* Don't crash on the hold gesture in the -/+ buttons for the horizontal margins (regression since #5303).
Thanks to <https://github.com/koreader/koreader/pull/5237> we can now extract the knowledge currently embedded in Transifex and put it directly in our source. This positively affects <https://github.com/koreader/koreader/issues/3754>.
Translation instructions and knowledge that comes out of localization-related questions should be preserved in the source, because Transifex is too ephemeral. For example, the links from <https://github.com/koreader/koreader/pull/2290> are no longer accessible. Even when they are, it's quite useful to have this information around while dealing with the code as well, and I also hope it'll be informative to contributors who seldom visit Transifex.
This commit also makes a few minor changes to obviate the need for comments where possible.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
* Make the cover thumbnail respect the cover's AR in the widget
* Add a "Mark as read/unread" button in the FM's longpress menu.
* Make sure the cover_info cache is wiped if necessary (sidecar purge/BookInfo cache clear).
The contained widget may not have integer position/dimen
(which should probably be fixed in those that don't ensure
that), and our maths could eventually make them even more
shifted by fractional parts.
In the end, when closing the widget, the refresh code may
miss painting/cleaning 1px and leave a border of the widget
on the screen.
- Popup footnotes: workaround strange behaviour of MuPDF
which is adding some unwanted margin above elements
with an "id=" attribute.
- In-page footnotes: also remove any left and right margin,
to keep footnotes aligned with the main text.
Also add 2 classnames (witnessed in quite a few recent
french books) to the list of classic classnames.
- Also bump crengine: CSS: fix parsing of multi classnames
and attributes selectors
Without having to resort to weird custom defaults.
* Split the current margins setting in three:
* Horizontal margins (because you generally want those two to be balanced).
* Top margin & Bottom margin (because you may want to tweak those separately to deal with quirky status bar/final line shenanigans).
* Also, add a "Reclaim bar height from bottom margin" toggle to the status bar menu, to optionally make sure the status bar won't eat into the bottom margin.
* Includes a free fix to diacritics popup refresh handling in the keyboard ;).
Companion PR to https://github.com/koreader/koreader-base/pull/884
* Basically flags devices known to be stable when using PxP inversion.
* Plus, random fix for #4870 ;).
* A few FrontLight tweaks & cleanups on Kobo:
* Moved the Kobo-specific startup status insanity to Kobo-specific init
* Made turnOff/turnOn frontlight do a smooth ramp down/up
* On Kobo, use turnOff/turnOn for suspend/resume, to get that smooth toggle
* On Kobo, for NaturalLight w/ a mixer, only set warmth for setWarmth, and only set Brightness for setBrightness, otherwise, it tried to set both with not in-sync values, which made the FL widget jittery.
Adds configuration to the top corners as well as the additional gestures hold and two-finger tap.
Deprecates `DTAP_ZONE_FLIPPING` and `DTAP_ZONE_BOOKMARK`.
Fixes#4877.
- Removed "Swipe to follow first link on page" menu item and
handling code, as it feels not really as practical as
"Swipe to follow nearest link".
- Removed recently added "External link action", as we can
just always present a popup with the url and the available
actions.
- Generic handling of these actions in onGoToExternalLink(),
so they are proposed on the Wikipedia lookup popup too.
- Allow external link on PDF documents (previously, only
internal links were handled).
- Have "Ignore external links on tap" available on all
document types.
- Added "Ignore external links on swipe" (default to true,
the current behaviour).
- Added multiswipe gesture "Follow nearest internal link"
(the existing "Follow nearest link" now follows the
nearest external or internal link)
- ButtonDialogTitle: added an option to look a bit more
alike ConfirmBoxes.
- Footnote popups: fix link unhighlight when tap on external link.
Otherwise it's:
1. Too small on virtually all devices due to a lack of scaling.
2. Unusably small by default.
It's currently scaled by the callers (dictquicklookup & footnotewidget) based on other properties, but you shouldn't have to change it from the default just to get something usable. ;-)
Have the code pre-invert some images when in night mode,
so they get inverted back to normal by night mode.
This will allow images to be displayed normally in
the following contexts:
- images in credocument pages
- long-press on images in credocument viewed in ImageViewer
- cover thumbnails in File browser and History
- full size covers when viewed in ImageViewer
- images in Wikipedia lookup results
* Add a toggle to disable the C blitter in the Dev menu (depends on https://github.com/koreader/koreader-base/pull/882) (never shown if the JIT is disabled, grayed out if the C blitter is not installed)
* Fix a few sizeUtf8Text call sites that were doing a nil check in order to account for the new return type.
* Tweak statusbar handling to avoid spurious sizeUtf8Text warnings when it's hidden, and unify its behavior between being hidden via toggle, and hidden on book open (at least when all-at-once is not enabled).
* c.f., https://github.com/koreader/koreader-base/pull/882 (Android, PB, RGB32 & Legacy Kindle regression fixes).
This internal ButtonProgressWidget widget was behaving
differently from all others (OptionTextItem, OptionIconItem
and ToggleSwitch) by duplicating some code from
ConfigDialog:onConfigChoose() instead of calling it directly.
While making it similar to others, I noticed that onConfigChoose()
did a full repaint, which was necessary for some settings to
be applied (ie: Contrast).
On CreDocument, this full repaint may cause some double drawing
on config changes (ie: Margins, drawing once after margin changes,
and then re-positionning to previous xpointer).
So, make the need for full repaint a condition on KoptOptions.
Remove gray underline on text items (font size items).
Adjust gray color of ButtonProgressWidget to match the
one of ToggleSwitch (just need to invert it, as it's
used to select button, which cause this color to be
inverted).
* Fix the "Enable debug logging" checkbox so that it properly disables "Enable verbose debug logging" when it gets disabled
* Avoid asking ImageWidget for alpha-blending when it's not useful
* Make ImageWidget's alpha-blending code-path double-check that alpha-blending actually is needed, and avoid it if possible
* In the same vein, only do alpha-blending in textboxwidget when absolutely necessary
* Prefer color constants over the gray() method, ensuring that they're part of the eInk palette
Depends on https://github.com/koreader/koreader-base/pull/853Fix#4774
* Various FocusManager related tweaks to limit its usage to devices with a DPad, and prevent initial button highlights in Dialogs on devices where it makes no sense (i.e., those without a DPad. And even on DPad devices, I'm not even sure how we'd go about making one of those pop up anyway, because no Touch ;)!).
* One mysterious fix to text-only Buttons so that the flash_ui highlight always works, and always honors `FrameContainer`'s pill shape. (Before that, an unhighlight on a text button with a callback that didn't repaint anything [say, the find first/find last buttons in the Reader's search bar when you're already on the first/last match] would do a square black highlight, and a white pill-shaped unhighlight (leaving the black corners visible)).
The workaround makes *absolutely* no sense to me (as `self[1] -> self.frame`, AFAICT), but it works, and ensures all highlights/unhighlights are pill-shaped, so at least we're not doing maths for rounded corners for nothing ;).
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
Revert 9971eb85 and make multi-lines strings more readable.
(Multiline translatable strings extraction has been fixed
in koreader-misc tralua_xgettext.py.)
- Remove duplicated "Show footnote popup". Have the same setting
applied for Tap or 'Swipe to follow nearest link'.
- Make some menu items enabled or disabled depending on if they would
have some effect with the current state of other menu items, as
some kind of visual self-documentation of these dependancies.
- Add menu item to set the footnote popup font size, relative to
the book font size.
- SpinWidget: allow for showing some informative text
Small fixes to widths computation for a more balanced layout.
Decreased min width of names (on the left) from 33% to 25%, to
allow more room for toggles on the right.
(May make things a little bit too stretched out with english,
but should help with other languages that use longer words to
name things than english.)
Also ignore disabled option names in the names width calculation
(noticable on the PDF right most config menu, where toggles were
uneededly too small)
When no height= provided, and the InfoMessage would overflow
screen height when some long message is provided, decrease the
font size until the widget fit.
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
Split https/http code-path (as socket.http can adjust the Authorization/Host headers automatically)
Warn the user when the protocol differs from http/https
When Wifi is connected, the message "Connected." stays on the screen
waiting for the user feedback. The change sets reasonable timeout
for info message to disappear
The font size items (Aa Aa ... Aa) and the align & column
items (for PDF) had a non-tapable spacing between them,
which could make hitting an item difficult.
This replaces this spacing by padding on each side of the item,
so a tap in between will always catch one item, for easier
selection.
- ReaderConfig does not need to call again self:initGesListener() on
screen rotation/resize, as it uses the TouchZone infrastructure
that deals itself with rotation. So, it was adding new gestures
that were overriding tap on footer and preventing it from working.
- ReaderFooter: fix refresh area (which was too small when toggling
from hidden to visible)
- ReaderToc: fix crash when showing TOC in scroll mode after rotation
- Menu: fix crash when no onReturn defined (could happen when tap on
bottom left corner when showing an empty TOC)
When a link is covered by the footnote widget, we highlight it
again when closing the footnote, and schedule an unhighlight
0.5s later.
When we tap on another footnote link, this was happening too
but the unhighlight unhighlighted all, including the new
footnote link.
This disable the former when the latter happens.
Adds new options to the Links> submenu, for now only
available and used with CRE documents.
- Allow larger tap area around links
- Ignore external links
- Show footnotes in popup
- Show more links as footnotes
(This last item is mostly for testing and loosening the
footnote detection algorithm, and see how it would behave
with glossary-like links and inter glossary terms links.)
Fix distance computation from gesture position to link by
using segments.
Code for detecting if a link is a footnote is in cre.cpp, and
tweakable a bit with flags in ReaderLink:showAsFoonotePopup().
Footnotes HTML content is displayed by a new FootnoteWidget,
which uses MuPDF for its rendering.
From it, swipe south or tap outside to close, swipe to the left
to follow the original link and jump to the footnote location
in the book.
Also fix tap on highlights after the recent change to use segments
for displaying: use segments also when checking taps.
Manager supports separate gestures for the file manager and the reader. Gestures from the manager have a higher priority than built-in gestures.
Settings available in Gear -> Device -> Gesture manager
Mostly all that have a close button at top right, that may
be hard to reach or hit for some people: TOC, Bookmarks, History,
KeyValuePage (Book information, Statistics...), Book status...
Added full refresh on diagonal swipe where it was missing.
CoverMenu: removed onSwipe override, as it had become the same as
Menu a few months ago.
* Don't optimize away a touchmenu unhighlight when we need it
Fix#4234
(Regression after #4189, which, incidentally, gave us a neat way to
handle the issue, which was theoretically present well before that ;)).
* Bump base
Pickup latest changes, just because we can ;).
(OpenSSH bump)
TouchMenu: added options to menu items with the following defaults:
keep_menu_open = false
hold_keep_menu_open = true
So, default for Tap callback is to close menu, and for Hold callback
to keep menu open.
In both cases, provide the TouchMenu instance as the 1st argument to
the callback functions (instead of a refresh_menu_func I added in #3941)
so the callback can do more things, like closing, refreshing,
changing menu items text and re-ordering...
ReaderZooming: show symbol for default (like it was done for
ReaderFont, ReaderHyphenation...)
TextEditor plugin: update the previously opened files list in real
time, so the menu can be kept open and used as the TextEditor main
interface.
SSH plugin: keep menu open and update the Start/Stop state in real time
ReadTimer plugin: tried to do what feels right (but I don't use it)
Also remove forgotten cp in the move/paste file code
- css tweaks: use correct CSS "hyphens:" instead of "hyphenate:"
- screenshoter: more logical order of lines (no change in what it does)
- textviewer: make diagonal swipe really trigger a full refresh
- textwidget: more adequate text length to help with centering
- toggleswitch: fix sizing & centering with correct calculations
(this reduces a bit the size of switches, and may cause a new
truncation in some translations)
Feature of ScrollTextWidget, only used for now by TextEditor.
Pan is like Swipe, but wait a bit at end of gesture to release:
the line on which Pan was started will be moved to where Pan is
released.
May conflict with MovableContainer (so not enabled for DictQuickLookup,
where it could have been nice - but it would work only with text
dictionaries, not with HTML ones, as ScrollHtmlWidget can't really
do that).
Don't consider sidecar file when sorting by access time.
Rename 'sort by title' to 'sort by filename':
This is in accordance with the actual function of the code, which
uses filename rather than title as specified in file metadata.
This plugin mostly sets up a "Text editor>" submenu, that allows
browsing files, creating a new file, and managing a history of
previously opened file for easier re-opening.
It restore previous scroll and cursor positions on re-opening.
Additional "Check lua" syntax button is added when editing
a .lua file, and prevent saving if errors.
The text editing is mainly provided by the enhanced InputDialog.
InputDialog: added a few more options, the main one being
'save_callback', which will add a Save and Close buttons
and manage saving/discarding/exiting.
If "fullscreen" and "add_nav_bar", will add a show/hide keyboard
button to it.
Moved the preset buttons setup code in their own InputDialog
methods for clarity of the main init code.
Buttons are now enabled/disabled depending on context for feedback
(eg: Save is disabled as long as text has not been modified).
Added util.checkLuaSyntax(lua_string), might be useful elsewhere.
Explicit new options: select_directory, select_file, show_files.
With select_directory, show an entry to select current directory
(so, removed undocumented hack "hold on .. to select current
directory").
Some problem somewhere with [[...]] strings starting with a
leading newline. Should probably be allowed, but for now
fix the few such cases to allow them being translated.
InputText: checks whether provided content can be given
back unaltered, which may not be the case after it is
splitted to UTF8 chars if the text is binary content.
Prevent editing text if that is the case.
Adds InputText and InputDialog :isEditable() and :isEdited()
methods.
Also accounts for the scrollbar width when measuring text
to prevent it from being displayed when not needed.
Also ensure a minimal size of the scrollbar thumb so it is
rendered when huge text with many lines is displayed.
Virtual keyboard: Hold on Backspace: delete from cursor
to start of line instead of clearing all text content.
* Make findcalibre actually useful
By setting SEARCH_LIBRARY_PATH when a Calibre tree is found, so that
book paths can properly be constructed.
Users should still very much set it themselves, but at least everything
works as intended when not, instead of mysteriously half-breaking later.
Drop the SetDefaults bits, it appeared to have been added to fix no-ops
detected by Luacheck, and it's actually non-functional, because
SetDefaults doesn't handle saving variables it did not itself assign.
So this was just causing the "Do you want to save new defaults" popup to
show up on exit, but it couldn't actually do anything useful (like, say,
save the new SEARCH_LIBRARY_PATH value).
fix#4082
* Better comments about the state of NaturalLight on the Clara, and how this might translate to the H2O²r2.
re #4015
* Make ScrolltextWidget refresh as "partial" only on actual Scroll events
Moving the cursor should stay "ui", or things gets annoying really fast
;).
re #4084
* Bump base to pickup ZMQ fixes (fix#4086)
InputText, ScrollTextWidget, TextBoxWidget:
- proper line scrolling when moving cursor or inserting/deleting text
to behave like most text editors do
- fix cursor navigation, optimize refreshes when moving only the cursor,
don't recreate the textwidget when moving cursor up/down
- optimize refresh areas, stick to "ui" to avoid a "partial" black
flash every 6 appended or deleted chars
InputText:
- fix issue when toggling Show password multiple times
- new option: InputText.cursor_at_end (default: true)
- if no InputText.height provided, measure the text widget height
that we would start with, and use a ScrollTextWidget with that
fixed height, so widget does not overflow container if we extend
the text and increase the number of lines
- as we are using "ui" refreshes while text editing, allows refreshing
the InputText with a diagonal swipe on it (actually, refresh the
whole screen, which allows refreshing the keyboard too if needed)
ScrollTextWidget:
- properly align scrollbar with its TextBoxWidget
TextBoxWidget:
- some cleanup (added new properties to avoid many method calls), added
proxy methods for upper widgets to get them
- reordered/renamed/refactored the *CharPos* methods for easier reading
(sorry for the diff that won't help reviewing, but that was needed)
InputDialog:
- new options:
allow_newline = false, -- allow entering new lines
cursor_at_end = true, -- starts with cursor at end of text, ready to append
fullscreen = false, -- adjust to full screen minus keyboard
condensed = false, -- true will prevent adding air and balance between elements
add_scroll_buttons = false, -- add scroll Up/Down buttons to first row of buttons
add_nav_bar = false, -- append a row of page navigation buttons
- find the most adequate text height, when none provided or fullscreen, to
not overflow screen (and not be stuck with Cancel/Save buttons hidden)
- had to disable the use of a MovableContainer (many issues like becoming
transparent when a PathChooser comes in front, Hold to paste from
clipboard, moving the InputDialog under the keyboard and getting stuck...)
GestureRange: fix possible crash (when event processed after widget
destruction ?)
LoginDialog: fix some ui stack increase and possible crash when switching
focus many times.
The Dogear icon is 20x20 pixels and was never scaled where used. Now:
- The bookmark icon (top right of screen) is scaled to 1/32th of the screen
width (previously, it was 1/30th on a 600px wide emulator, 1/53th on a GloHD).
On CreDocument, furthermore decrease its size if needed depending on the
selected margins so it never overwrite the text.
- CoverBrowser list view: scale it to the available room under
the "N % of P page" text, so it does not cover "page".
- CoverBrowser mosaic view: scale it to 1/16th of the cover rectangle, which
should prevent if from overwritting the text thanks to a max text width of
7/8 of the cover rectangle.
Also for CoverBrowser: don't index metadata for unsupported document
(which could happen when browsing files with PathChooser) and show
full filename for such documents.
Also: ImageWidget: small fix in case we use both scale_factor and
scale_for_dpi.
* Unbreak dropbear after #4077
* Move the Kindle SO check to init
* Various virtual keyboard fixes to eradicate the remaining refresh conflicts (i.e., tearing artifacts), no matter the user's settings. (re #4069, re #3130).
- add refresh after tap Cancel button,
- radiobutton and checkbutton with the same font size,
- truncates text outside window,
- better control font face and size in OpenWithDialog
and RadioButtonTable widgets
* Switch all initial highlights to "fast" update
i.e., everything that does an invert
Plus a few other things that refresh small UI elements onTap
Re #3130
* Tweak refreshtype for a number of widgets:
* Fix iconbutton dimen
* Make touchmenu flash on close & initial menu popup. Full-screen on close.
* Use flashing updates when opening/closing dictionary popup. Full-screen on close.
* Switch FileManager to partial.
It's mostly text, and we want flash promotion there.
* Make configdialog & menu flash on exit
* Make FLWidget flash on close
* virtualkeyboard: flash on layout change & popup.
* Potentially not that great workaround to ensure we actually see the
highlights in the FM's chevrons
* Flash when closing BookStatus Widget
* Optimize away a quirk of the dual "fast" update in touchmenu
* Promote updates to flashing slightly more agressively.
* Document what each refreshtype actually does.
With a few guidelines on their optimal usecases.
* Switch remaining scheduleIn(0.0) to nextTick()
* Tighter scheduling timers
Shaving a hundred ms off UI callbacks...
* Cache FFI C Library namespace
* Ask MuPDF to convert pixmaps to BGR on Kobo
Fix#3949
* Mention koxtoolchain in the README
re #3972
* Kindle: Handle *all* fonts via EXT_FONT_DIR instead of bind mounts insanity
* Make black flashes in UI elements user-configurable
(All or nothing).
* Jot down some random KOA2 sysfs path
Changed from 1 second to 2.
I also fixed the problem with blocking the UI when displaying the message. Now notification box is closed after taping anywhere (like InfoMessage).
Also allows for updating the fallback font and see results
in real-time on the underlying document.
Bump crengine for: fix updating fallback font
Also adds a menu item to generate a html document showing some
sample text rendered with each available font (only if the user has
a file koreader/settings/fonts-test-sample.html with some HTML
snippet of his choice).
Avoid drawing the fill bar our of the progress bar.
Avoid zero divided by zero that return 'nan' (Not a Number),
that does not bother lua code, but will crash libblitbuffer.so
when it gets nan as a coordinate.
New module RenderImage (alongside existing RenderText) to provides
image rendering and scaling facilities.
Uses MuPDF, but tries first giflib on GIF.
Allows for getting all the frames from an animated GIF.
When hyphenating a word, the existing algorithms enforced a minimal
length of 2 for each word fragments on left or right side.
This adds a widget to allow changing these minimal sizes (from 1 to 10).
Transifex warns about some issues but this is not one of them.
The proper solution would be `padding_right`. But although it's supported on FrameContainer it's not passed on through TextBoxWidget.
If the device supports it, add a checkbox for enabling automatic
warmth, and a widget for setting the hour at which warmth should be
maximal ("bedtime").
The hour can be changed through +/- buttons; holding them will change
with 30min steps. As soon as automatic warmth is enabled, the 'warmth'
cannot be changed manually anymore, so we make its widget grey, but
the current value is still displayed correctly. Changing the hour
changes warmth accordingly.
* [VirtualKeyboard] Add support for keynaviguation
Also rename the variable "layout" to "keyboard_layout" because conflict
with the layout from the focusmanager
* Make the goto dialog compatible with key naviguation
My solution is to change the order of the widget. The last one will the
virtualkeybard so it catch all the keybinding, and below it, make the
dialog "is_always_active = true" so it can receive touch event.
* Correctly show the virtual keyboard on dpad devices
* change the order to call the virtualKeyboard so it end up on top
* Handle the multi input dialog
* Support reopening the virtualKeyboard by the Press key
* add check focusmanager
* Fix https://github.com/koreader/koreader/issues/3797
* MultiInputDialog : Now work on non touch-device
* Set the virtualkeyboard to be a modal widget
* Fix the layout in multiinputwidget
* Fix for the various combination of
hasKeys,hasDpad,isTouchDevice
* [Focusmanager] Better handling of malformed layout
* [toggleswitch] Add support for key navigation to this widget
Add the onFocus an onUnfocus event handler
add a new function that just circle the switch if not touch event is
detected
* Add key navigation to the readermenu
The shortcut is still Alt-gr on sdl, to be defined on Kindle
* Remove the old method of handling the Press key.
Now the event is handled by the main widget who implement focusmanager
and then dispatched to the currently focused item.
Modify the fine font tuning only for non touch-devices
See : https://github.com/koreader/koreader/pull/3785#issuecomment-375306466
Emulate the hold touch behavior on non touch device by clicking the right key
ButtonTable: do not add vertical separator to the layout because the focus
manager can't traverse them. Add check to make disabled button non-clickable.
Navigating the TOC, viewing a full screen image, browsing
reading stats... would call paintTo() on ReaderUI (so, asking
the engine to render the page) or FileManager (so, rendering cover
images) even though their content is hidden.
Widgets registering to UIManager have to explicitely states
they cover the full screen (UIManager can't know, parts of their
dimen may be transparent, e.g. if it is a CenterContainer).
Also uses PathChooser (instead of InputDialog) in 'Set Wikipedia
Save as EPUB directory'. When setting not yet set, propose to
create and use ~/Wikipedia/ .
* [device][kindle4] add fake event to kindle4
* modify focusmanager to allow for more complex layout
The focusmanager now naviguate the layout by avoiding nil value
instead of relying on table lenght. It should be completely backward
compatible
* add Dpad naviguation to the touchmenu
* fix crash because virtualkeyboard on non touch device
the kindle4NT has no keyboard nor touch, the fix open the virtual
keyboard so koreader dont crash but it's not useable
* Enable device with keys to use the touchmenu
* Don't get stuck in reader progress statistics plugin
* [underlinecontainer] Fix and remove unused function
References #1898.
For devices with natural light (KA1, H2O2), add new button 'Configure'
at the bottom which will open the naturallightwidget, which will be
placed at the top. The frontlightwidget will be moved to the bottom,
and both have permanent focus. This way, you can change the parameters
and immediately test them by changing the frontlight level and
warmth. On the KA1, both widgets will easily fit, but on smaller
devices it may be that they overlap.
Since the frontlightwidget will keep focus, we disable the 'Configure'
button when the naturallightwidget opens. We also remove its 'Close'
button and disable 'onTapCloseFL', so that the frontlightwidget cannot
be closed while the naturallightwidget is displayed.
This widget is used to configure the natural light on KA1/H2O2. It
allows the user to set the gain/offset values for white/red/green, as
well as the exponent used in the formula.
Numbers can be changed via screen keyboard or through the plus/minus
buttons next to the numbers (holding the buttons will in/decrase with
smaller steps). Changes are applied immediately, but will only be set
permanently if 'OK' is pressed. If 'Cancel' is pressed, the new values
are discarded and the old ones restored. Also, pressing 'OK' will save
these values in the koreader settings file (there's no support for
changing these values in Nickel, so there's nothing to sync to its
config file). The 'Restore Default' button will install the original
defaults that were derived from Nickel's behavior.
This widget is meant to be called from the frontlight widget and is
placed at the top, so that the frontlight widget can still be used to
test the current values (see next commit).
Some Hold and move (hold on title and move away from it) would not work.
Pan (=swipe with hold at end) while selecting text would move the
window (it now does nothing: proper text selection still needs Hold
on word at start).
Also increase hold duration from 2s to 3s (for switching lookup
between dict/wikipedia) to be consistent with the 3s duration in
readerhighlight.
If the device supports natural light (currently only KA1), extend the
frontlight widget to also allow for changing the 'warmth' value. We
more or less duplicate the widget for 'brightness', with the exception
that we drop the 'toggle' button, which does not make much sense for
the frontlight's warmth. Also, we add captions 'Brightness' and
'Warmth' for clarity.
First item would be underlined if the device is both Touch and Keys
capable (emulator, android, pocketboot...), which is not really
pretty. Delay that till Keys for focusing are really used.
crengine may now give us multiple authors (if multiple <dc:creator>
in epub metadata) separated by \n.
Deal with that where needed.
Limit the number of authors displayed in coverbrowser views.
Bumped base/crengine: multiple <dc:creator> + fix mobi images order
Bumped base: util.runInSubProcess(): give child its own process group
When no manually added specific 'poweroff' or 'reboot' screensaver
settings, use the suspend/sleep settings set via menu with an added
overlay message in top right corner.
Generalized some settings: "White background behind message and images"
and "Stretch covers and images to fit screen", and move "Exclude this
book's cover from screensaver" up a level (and remove this menu item
added by ReaderMenu when closing document).
Don't use memory cache with rendered screensaver images.
ImageWidget: fix wrong behaviour (stretch) when 'file', 'width',
'height' and 'scale_factor' provided: now, keep aspect ratio.
ImageWidget: increase file image mem cache (mostly used for icons)
from 2 to 5MB to be ready for devices with very high DPI.
(each one at top right of each page)
Such images can be loaded dynamically when the display of a page requires it.
Allow alternating between the image and its title with Tap on it.
Allow for viewing this image zoomed in ImageViewer with Hold on it.
DictQuickLookup: add generic support for result.images, that
could optionally be provided in Wikipedia lookup results.
New TrapWidget: invisible full screen widget for catching UI events. Can
optionally display a text message at bottom left of screen (ie: "Loading..."),
used by default by Trapper:dismissable functions when no widget provided.
Added Trapper:dismissableRunInSubprocess() to run a lua function in
a sub-process, allowing it to be dismissed, and returns its return
value(s).
Configure number of items per page (from 6 to 24) - default is 14
Allow filenames to wrap so that we can see the full name
Used by File browser, History, Search Result, Bookmarks, Table of contents (only single line), File chooser, OPDS catalog
* Adds a generic HTML widget modeled after the text widget, and HTML dictionary support. HTML dictionaries can have their own CSS (for X.ifo it must be X.css). The base CSS just resets the margin and sets the font.
Note that the widget doesn't handle links, that wasn't needed for the dictionary.
Closes <https://github.com/koreader/koreader/issues/1776>.
* Show tag stripped HTML if the dictionary entry isn't valid HTML
* Simulate the normal <br/> behavior
* Bump base
* Prevent open screensaver more than one in the same time
* Add option to enable/disable background in message screensaver
* fallback to random images if this book cover is excluded feature + fix Disabled (leave screen/page as it is)
* Autostretch disable by default, more fallback options, leave screen as it is
This feature, introduced some days ago, was actually
doing 2 updateItems calls: the initial one, and a second
to switch to focused_file page (cheap with classic display mode,
less cheap with CoverBrowser modes).
This change allows doing that in a single call.
To make it more alike bottom menu:
- left and right border not displayed
- line below icons extends to screen borders
- same bottom border size
And make separator lines have same padding on both sides
When going from reader to filemanager, we are in the directory
containing the last_file. With this, we will also be on the page
showing this file.
When in filemanager and going up (".."), we will also be on the
page containing the directory we came from.
Rationalize horizontal construction of Menu items (TOC,
Bookmarks, Classic file views) for more even padding.
Align "x" close button diagonaly with top right border and title.
Also add forgotten scale_for_dpi to MultiConfirmBox
This makes button heights similar in all uses of ButtonTable.
It depended on how the ButtonTable was used in each widget
(previously, first and last row may have different sizes than
the others).
buttontable.lua: more even buttons height whether zero_sep or not
framecontainer.lua: added padding_top/bottom/left/right (similar to
what was done for iconbutton)
The following widgets have been adapted for this, with some
additional fixes:
buttondialog.lua
buttondialogtitle.lua: wider title with adequate padding
confirmbox.lua + multiconfirmbox.lua: dismissable via tap outside
inputdialog.lua + multiinputdialog.lua: more even vertical padding between elements
imageviewer.lua
textviewer.lua
datewidget.lua
timewidget.lua
Additionaly: frontlightwidget.lua: fixed width of progress bar that
was exceeding window width since the Size scaling adjustements
Decide baseline vertical position according to font metrics, instead
of the hardcoded 0.7 (in textwidget, which made the text a little
bit up in its box), and 0.75 (in toggleswitch, which made the text a
little bit down in its box). This usually gives a value around 0.72
or 0.73 with our ui fonts, which looks about right.
ReaderFooter: add bottom padding, now that our text goes a few pixels lower
"partial" refresh causes a full (without black flash) refresh on
Kindle (which uses REAGL mode for partial refresh). This causes a
full redraw of widgets, which is a bit distracting with some of them:
- dictquicklookup: when showing next definition
- infomessage: when displaying a new one (Wikipedia Save as epub)
Also fix bottom menu, that even when closed, would still register
bottom area as dirty: this would cause top menu navigation to
cause a full partial refresh, only noticable on Kindle.
* Fix crash with keyboard navigation of onHold buttontables
Would crash when encountering a separator or when the number
of buttons in a row changes.
* Reset previous selected item on new buttontable
Closes: #3236 and #3235
Details:
> Also, when looking in days, we see info how many hours we read. It would be great if we could tap a day, it opens info on book(s) we read that day with info pertaining to that day, and if we tap on book, we receive book info for that book.
> Statistics plugin is really great, I started to look in my reading statistics now much more, but all the time I can go only in one way. And I need to exit at lowest level of info. It would be great if I can use statistics plugin like part of menu, to go up and down within statistics data and exit at my wish, not when I have to.
Also added:
* new statistics book by week
* new statistics book by month
* last year by week now we can see days in selected week
* Cache scaled images with scale_for_dpi
* Don't update original self.scale_for_dpi
A same ImageWidget object can be free()'d and re-render()ed,
and we would then lose scale_for_dpi on next renderings
