When enabled in BookMap, both BookMap and PageBrowser get:
- alternating gray background on chapter spans
- hatched background instead of uni-gray on hidden flows.
Also, with both normal look and this alternative theme,
show some hatched overlay on thumbnails part of hidden flows.
ReaderToc: for each TOC item, have it carry its sequence/number
in that level (we do this in validateAndFixToc() where we are
already iterating all the items).
BookMap and PageBrowser instances can be stacked; when
toggling a bookmark in a lower PageBrowser and closing it,
make sure the bookmark is shown in the BookMap we get back to.
Also consider TOC and hidden flows as a thing that can be
edited and needs refreshing, so we're ready for next commits
about custom TOC and custom hidden flows.
Also update Reader footer when closing the last BookMap
or PageBrowser.
There was no real reason for having to wait.
Also avoid possible crash when a background generated
thumbnail would be displayed after other things happened.
Instead of small markers below the baseline, use
translucent vertical lines over most of the ribbon's
height to mark thumbnail rows, so we can more easily
relate chapter spans to thumbnail rows.
When not provided, the cursor stays at its initial position,
which might not be the best if replacing the whole content,
where we would prefer to have it at start or end.
* New menu option and filemanager filter to hide finished books #7158
The default behavior is to display the finished books (no change on
upgrade). For consistency with the two similar options, it represented
by a checkbox "Show hidden books" that is checked by default.
The implementation is straightforward, meaning that, when the option is
unchecked, each file will require a call to `filemanagerutil.getStatus`
that checks its status.
For clarity, the code uses the "finished books" expression because the
condition is relevant to the *book* metadata, while the other settings
are about *file* attributes.
* Device: Add a `hasSeamlessWifiToggle` devcap to complement `hasWifiToggle`, to denote platforms where we can toggle WiFi without losing focus, as this has obvious UX impacts, and less obvious technical impacts on some of the NetworkMgr innards...
* Android: Mark as `!hasSeamlessWifiToggle`, as it requires losing focus to the system settings. Moreover, `turnOnWifi` returns *immediately* and we *still* run in the background during that time, for extra spiciness...
* NetworkMgr: Ensure only *one* call to `turnOnWifi` will actually go on when stuff gets re-scheduled by the `beforeWifiAction` framework.
* NetworkMgr: Ensure the `beforeWifiAction` framework will not re-schedule the same thing *ad vitam aeternam* if a previous connection attempt is still ongoing. (i.e., previously, on Android, if you backed out of the system settings, you entered the Benny Hill dimension, as NetworkMgr would keep throwing you back into the system settings ;p). This has a few implications on callbacks requested by subsequent connection attempts, though. Generally, we'll try to honor *explicitly interactive* callbacks, but `beforeWifiAction` stuff will be dropped (only the original cb is preserved). That's what prevents the aforementioned infinite loop, as the `beforeWifiAction` framework was based on the assumption that `turnOnWifi` somewhat guaranteed `isConnected` to be true on return, something which is only actually true on `hasWifiManager` platforms.
* NetworkMgr: In `prompt` mode, the above implies that the prompt will not even be shown for concurrent attempts, as it's otherwise extremely confusing (KOSync on Android being a prime example, as it has a pair of Suspend/Resume handlers, so the initial attempt trips those two because of the focus switch >_<").
* NetworkMgr: Don't attempt to kill wifi when aborting a connection attempt on `!hasSeamlessWifiToggle` (because, again, it'll break UX, and also because it might run at very awkward times (e.g., I managed to go back to KOReader *between* a FM/Reader switch at one point, which promptly caused `UIManager` to exit because there was nothing to show ;p).
* NetworkMgr: Don't drop the connectivity callback when `beforeWifiAction` is set to prompt and the target happens to use a connectivity check in its `turnOnWifi` implementation (e.g., on Kindle).
* Android: Add an `"ignore"` `beforeWifiAction` mode, that'll do nothing but schedule the connectivity check with its callback (with the intent being the system will eventually enable wifi on its own Soon(TM)). If you're already online, the callback will run immediately, obviously. If you followed the early discussions on this PR, this closely matches what happens on `!hasWifiToggle` platforms (as flagging Android that way was one of the possible approaches here).
* NetworkMgr: Bail out early in `goOnlineToRun` if `beforeWifiAction` isn't `"turn_on"`. Prompt cannot work there, and while ignore technically could, it would serve very little purpose given its intended use case.
* KOSync: Neuter the Resume/Suspend handlers early on `CloseDocument`, as this is how focus switches are handled on Android, and if `beforeWifiAction` is `turn_on` and you were offline at the time, we'd trip them because of the swap to system settings to enable wifi.
* KOSync: Allow `auto_sync` to be enabled regardless of the `beforeWifiAction` mode on `!hasSeamlessWifiToggle` platforms. Prompt is still a terrible idea, but given that `goOnlineToRun` now aborts early if the mode is not supported, it's less of a problem.
Move as much of the state tracking as possible inside VirtualKeyboard itself.
InputDialog unfortunately needs an internal tracking of this state because it needs to know about it *before* the VK is shown, so we have to keep a bit of duplication in there, although we do try much harder to keep everything in sync (at least at function call edges), and to keep the damage contained to, essentially, the toggle button's handler.
(Followup to #10803 & #10850)
wpa_supplicant returns all non-ASCII SSIDs as raw bytes in the form
\x0a. We interpret these bytes as UTF-8, and make sure that all invalid
characters are replaced with a �.
Fix issue introduced by 976aaf5f: with full screen
text editor and hiding the keyboard, a tap in the
text area would show a new keyboard hiding the
buttons allowing to save/close the text editor,
getting us stuck there.
Makes more sense this way.
Re: #10828
Also clarify the UIManager "no dialogs left" message, and drop the
return value, as it's meaningless, we just want to break & return.
Assume the host system does things right otherwise.
Should be sane on Kindle
On PocketBook, who knows, but assuming the device actually suspends,
that should effectively kill our keepalive
Irrelevant for Android, as we skipped it because the wifi toggling
methods are interactive.
Fix#10823
(For reference, we *enable* wifi_was_on no matter *how* wifi is enabled,
but we only toggle it off when it's killed by a *direct* user interaction,
the intent being that if *something* non-interactive enabled wifi,
you'll probably silently need it on resume too).
As early as turnOnWifi.
Implement it on hasWifiManager platforms, preventing useless
connectivity checks to run when they're obviously never going to work
because you're out of range of your AP.
Also implemented a flag to notify the backend if the connection attempt
was interactive or not.
Right now, interactive is extremely restricted, it basically means the
menu checkmark, or a gesture.
The intent being that for stuff like the beforeWifiAction framework, we
don't want the backend to spawn extra UI.
Specifically, for hasWifiManager platforms, we no longer spawn the AP
scan list on failure unless the caller was interactive.
TL;DR: beforeWifiAction is now much less obnoxious when you're obviously
not able to connect.
MultiInputDialog does a close -> show in the same callback,
so if we don't actually keep it in sync with the actual state, we lose
the keyboard and essentially softlock the UI, which is Very Bad(TM).
NOTE: InputDialog has its own keyboard_hidden flag, and it looks...
fairly nightmarish.
Re #10743
Note that this only makes faulty switches slightly less annoying: for a
stuck switch, instead of a string of page turns, you'll get a single
missed page turn on the tap that actually releases the stuck contact...
The Kindle swipe animations & physical key inversion apply *everywhere*,
so we need this accessible in the FM, too.
Move it to Navigation, which is where it already was on !Touch devices.
we use it as text anyway and test if it is the empty string also.
this fixes a crash in viewhtml when holding a selector with an empty clipboard, we try to contcate getClipboardText which is nil (on !SDL & !Android)
And add an OTM block to do a cleanup pass on existing DBs (which might take a while if you're severely affected, because we've seen reports of DBs north of 2GB).
The ToC is no longer in the HTML we get from the
Wikipedia API. So, add it ourselves.
Also, as we can't get anywhere the Wikipedia localized
string for "Contents" (ie. "Sommaire" in French), use
thick <HR> to mark the start and end of this ToC.
* Notification: Drop the fencing from #10083; it never actually helped, and had subtle side-effects we could do without.
* VirtualKeyBoard: Flash on close, otherwise, some of the fast refresh glitches may be burned into the working buffer until a flash. Making sure we flash ourselves prevent it from sticking around on the page ;).
* util: Move `writeToSysfs` to base (i.e., `ffi/util`), as we need it there (and it actually makes more sense there anyway ;p).
* Bump base for https://github.com/koreader/koreader-base/pull/1645, which is where the actual workaround (hopefully) lives.
Re #8414, #9806, #10558
The HTML we get from Wikipedia has recently changed,
which has caused images to not be detected and shown
in DictQuickLookup, and to be missing or ugly in
saved EPUBs. Update our code and CSS to display them
again.
On long-press on the "Show matched stylesheets rules"
buttons, ignore those from our epub.css/html5.css and
from styletweaks, which may make investigating a book
style simpler without their noise.
- Add a toggle in Font settings> allowing showing font
ordered by most recently selected (long-press on
it allows clearing this history).
- Keep in G_reader_settings a list of known fonts, so
we can notice newly added user fonts, and put them
at the start of the most recently selected. Show
these new fonts with a symbol in the menu.
- TouchMenu: allows for a flag to trigger menu
refresh when going up.
* Enable before_wifi_action & after_wifi_action on hasWifiToggle platforms (which is basically all of 'em except naked SDL).
* Decouple restoreWifiAsync from hasWifiManger, because we can do that on other platforms (namely, Kindle. Probably PB, too, but WiFi is already a mess there, and I can't test it).
* Implement restoreWifiAsync on Kindle.
* Properly flag rM as hasWifiManager & hasFastWifiStatusQuery, because it is actually both of those (it uses our wpa_supplicant backend).
* Update the KOSync checks to take these changes into account, to properly disable auto_sync if necessary.
* Really made the Network* event signaling consistent. For realz this time.
* In an effort to make the whole beforeWifiAction framework somewhat usable there, we now assume connectivity is always available on !hasWifiToggle platforms...
Instead of opening the same font multiple times for each different
size (multiple face instances), share one face instance and create
multiple size instances.
Fix: #10539, and for context #6489, #6733, #6534
Reorganize and reword most of the settings to make it clear what actually ties into auto sync, and what doesn't. (Specifically, what happens when a pull attempts to sync forward or backward has nothing to do with auto sync, it applies in all cases; while the periodic sync *does* require auto sync).
The main point of contention, though, is that auto sync will now *always* attempt to setup network connectivity (i.e., on resume/suspend/close). Periodic sync will *not* though (the intent being that, if you use periodic sync, you're relying on the activity check to actually keep wifi on at all times)).
Since this may lead to a large amount of nagging about wifi toggles on devices w/ NetworkManager support, it is now *disabled* by default on those devices. (And given that it wouldn't have worked because of the lack of connectivity, that doesn't really make any practical difference ;p).
Additionally, given the fact that there's no way to make this behavior viable if the "before wifi" action is left at its default of "prompt", this feature now *requires* that to be set to "turn_on" (on devices where it can, of course); attempting to toggle it on will warn about that if necessary.
This change is retroactive (OTM).
Includes an assortment of fixes and cleanups, including migrating to the new LuaSettings API, which is why there's no longer a smattering of superfluous flushes.
Add a restricted but convenient mode showing BookMap like
in initial view, while still allowing chapter levels to be
tweaked. This allows getting back to this view with another
gesture to see the overall progress in the book, while
still having the normal BookMap in flat mode acting as
an alternative ToC.
Available as an action to associate to a gesture, and
with long-press on the "Book map" menu item.
Allows hairy-boxes amateurs to get small markers (under
the baseline) every 10 pages (with -/+ to get small or
medium markers, with optionally smaller ones every 5 pages).
Align page numbers (the vertical ones, on the left of
a BookMapRow) on the baseline of the BookMapRow, where
page slots rise from.
Also tweak the page number spike below the baseline used
in PageBrowser.
Notification is a toast, so it doesn't stop event popagation.
If we don't disable thoses handlers inside Notification, we get spurious
duplicate handlers being fired ;).
Fix#10461
Make sure we only send Suspend/Resume events when we *actually* suspend/resume. This is done via the Device `_beforeSuspend`/`_afterResume` methods, and those were called by the *input handlers*, not the PM logic; which means they would fire, while the PM logic could actually take a smarter decision and *not* do what the event just sent implied ;).
(i.e., sleep with a cover -> suspend + actual suspend, OK; but if you then resume with a button -> input assumes resume, but PM will actually suspend again!).
Existing design issue made more apparent by #9448 ;).
Also fixes/generalizes a few corner-cases related to screen_saver_lock handling (e.g., don't allow USBMS during a lock).
And deal with the fallout of the main change to the Kobo frontlight ramp behavior ;).
Happens in case the InputText field is emptied by the user.
The backend code makes rather strong assumptions that it'll *always* get a number of of it ;).
Fix#10352
Such states (not quite sure how you could actively get in such a broken state to begin with, mind you) could lead to an attempt to load an old fontlist cache in an incompatible format.
Re: #9771
Add a left button to the title bar to show the list
of results as a popup.
Dictionary: tap or long-press on that button give
different view of the results.
Wikipedia: request 30 results instead of 20, so we
can show 15, 10 or 6 of them per page of that popup.
With tall ButtonDialog with many rows, allows for a more
natural and readable scrolling without any truncated row
(like in Excel, we previously behave as web browsers).
ButtonTable:
- make the span and separator layout more explicite
- add some small horizontal padding when button text
is centered
When the containee is row-based, this can ensure that when
scrolling with swipes, we get the a full row at top, and
that any truncated row at top or bottom is fully visible
after a swipe.
The final height of a button could be different whether
a smaller font size or multiline end up being used.
Also fix 2-lines logical error making it less favored.
Also forward any lang property to the underlying text widgets.
Allow disabling the hall efect sensor via the sysfs knob, so the kindle system wont sleep & wake the device
for those of use that stay in koreader, are caseless and have get spurious wakeups
* Rewrite the loop mechanism to use scheduled tasks instead of a single blocking-ish subprocess.
* Change the actual logic to be more pleasing to the eye, especially on newer devices, as those *may* natively ramp on set; and fix a bad interaction with that behavior that could lead to no ramp at all on ramp down.
* Simplify Generic's Suspend handling to deal with the refresh ordering in a saner manner. The screensaver might be visible a tad longer than before this change before the frontlight actually ramps off.
Add a top left menu item -/+ to show none, only on the
first thumbnail of a row, or on all thumbnails.
Also make the page slot separator longer in the bottom
ribbon before pages that start a thumbnails row.
Also show a little spike in the bottom ribbon below page
slots that get their page number displayed, to ease
figuring out the connection.
Change algorithm to comparing all kv pairs.
Also ignore any pairs where the value is "" when computing
the alignment, since they usually are intended more as
a title and should not interfere.
Instead of firing on(Enter|Leave)Standby Events, and having every other piece of code that might care about that handle re-scheduling their stuff themselves; simply make the standby implementation (i.e., AutoSuspend's) shift the whole task queue by the amount of time spent in standby to re-sync everything automatically.
(This is necessary in the first place because Linux, as the task queue ticks in CLOCK_MONOTONIC, which does *not* tick during suspend/standby; while we expect most of the tasks scheduled to actually reflect real world clock delays).
Handle scroll by row or page a bit differently, so we dont
constrain and readjust the focus page when reaching book
start or end: when later scrolling in the other direction,
we'll find exactly the view as it was (this means that
we allow a single thumbnail in the view, but it's less
confusing this way).
When using the new option "Daily timeline starts at",
make the separator line between 23:00 and 00:00 thicker.
Also tweak time picker to pick minutes by units of 10,
and remove max hour (06:00) limitation.
this allows going back and forth from links (think of undo / redo)
when going back and no forward locations and when we are not on the same page as the last saved location, add the current location to the forward stack, helping if one goes back by mistake they can jump back to their current location
when going back and no forward locations and when we are not on the same page as the last saved location, add the current location to the forward stack, helping if one goes back by mistake they can jump back to thier current location
Split original very long help text (which was very
slow to display) into 2 parts: About... and Available
gestures.
Also add -/+ buttons to change things (which can already
and more practically be done with swipes along the edges)
to give a bit of meat to these menus.
When passing as 'anchor' a Geom object (ie. a widget dimen
or a ges.pos), or a function returning such an object,
a MovableContainer will be initially positionned near this
point/widget, instead of being centered on the screen.
Allow that for ButtonDialog and ButtonDialogTitle, so we
can make them behave as context menus (ie. for a titlebar
top left/right icons).
If buttons and their text would fit in a smaller width,
reduce the whole ButtonTable width.
May be used for properly sized context menus with
ButtonDialog, with the width required depending on
the translations for a language.
Make these 2 widget behave similarly, and don't rely on
ButtonTable default width for their own default width.
ButtonDialogTitle: also properly size its title.
Properly compute Button and separator widths,
instead of using magic numbers (which lost their
magic over the years :)
Ensure buttons and progress widgets are properly
aligned on the sides.
Move the optional Warmth "Configure" button in the
middle of Warmth Min and Max.
Fix keyboard navigation layout, which was not working
on devices with Warmth.
All our widgets are considering their provided 'width'
as the outer width, except Button which considered it
as some 'inner width', to which padding/border/margin
were added. Let's have them all consistent.
Some other widgets using Button had tweaks to account
for that odd behaviour: fix and simplify them.
Also fix Button layout when text is left aligned.
For example, to determine whether the Japanese or Chinese form should be shown.
* Dictionaries.lua - use iso3 codes everywhere
readerdictionary.lua - convert iso to bcp tag, to construct ifo_lang
isolanguage.lua - map from iso3 to full language name, map from iso3 to bcp language tag
* Make the full language names translatable
* Store ifo information from dictionaries.lua in downloaded dictionaries
Move View html code from ReaderHighlight to a new
dedicated module.
Long-press on an element or its text in the HTML will
show a popup with a list of selectors related to this
element that can be copied to clipboard (to be pasted
in Find or in a Book style tweak).
2 addtional buttons in this popup allow seeing all the
CSS rulesets in all stylesheets that would be matched by
this element, which should make it easier understanding
the publisher stylesheets and using or creating style
tweaks.
As done in DictQuickLookup (more event handlers are
needed to cohabitate well with MovableContainer).
By default, selected word or text is copied to clipboard.
Also provide indexes to any long-press callback, as we'll
need them for View HTML.
- Fix sorting folders when collate is "type", "size", "percentage":
folders are sorted by name now.
- Fix getting next file in folder when collate is "mixed files and
folders": returned nil when next item was a folder.
- AutoFrontlight plugin: update checkmark on toggling
- KeepAlive plugin: update checkmark on toggling
- ReaderPageMap: font size menu entry
- ReaderStatus, common_settings_menu_table: book status "read" -> "finished"
* Add thinspaces between d/h/m/s
* Remove lead zeros
* Make letter `d` for days translatable
* Make thinspace into hairspace when compact
* Adjust and add unit tests
Only available with EPUBs containing 2 or more fragments,
and a file size large enough to ensure a cache file is used.
The idea is simply, on any rendering setting change, to
skip the rerendering of the full book and to defer any
rerendering to the moment we draw a DocFragment, and
render only it.
So, on a setting change, only the fragment containing the
current page will be rerendered, and the new fragments we
may cross while turning pages.
When having done so, KOReader is in a degraded state (the
full page count is incorrect, the ToC is invalid...).
So, a full rerendering is needed, and one will happen
in the background, and when the user is idle, we reload
seamlessly and quickly from the cache file it has made.
ReaderFlipping will show some icons in the top left
corner to let it know at which steps in this procress
we are.
Also don't propagate tap/hold on disabled menu items.
(When top and bottom menu displayed at the same time,
tap on a disabled top menu item could active some
bottom toggle change.)
Much easier to deal with thanks to the cleanup work done in #10062 ;).
* `carrier` is set to 1 as soon as the device is *administratively* up (in practice, as soon as we run `ifconfig up`). This is perfectly fine for `isWifiOn`, but absolutely not for `isConnected`, because we are not, actually, connected to *anything*, no attempt at associating has even been made at that point. Besides being semantically wrong, in practice, this will horribly break the connectivity check, because it expects that `isConnected` means we can talk to at least the LAN.
* Delving into the Linux docs reveals that `operstate` looks like a better candidate, as it reflects *operational status*; for Wi-Fi, that means associated and successfully authenticated. That's... closer, but still not it, because we still don't have an IP, so we technically can't talk to anything other than the AP.
* So, I've brought out the big guns (`getifaddrs`), and replicated a bit of code that I already use in the USBNetwork hack on Kindle, to detect whether we actually have an IP assigned. (Other approaches, like `/proc/net/route`, may not be entirely fool-proof, and/or get complicated when IPv6 enters the fray (which it does, on Kobo, Mk. 8+ devices are IPv6-enabled)).
TL;DR: Bunch of C via ffi, and `isConnected` now returns true only when the device is operationally up *and* we have an IP assigned.
Pulls in https://github.com/koreader/koreader-base/pull/1579 & https://github.com/koreader/lj-wpaclient/pull/10
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
Re: https://github.com/koreader/koreader/issues/9806#issuecomment-1416827447
Depends on https://github.com/koreader/koreader-base/pull/1576
Includes assorted cosmetics tweaks related to duplicate `setDirty` calls when instantiating widgets that already have an `onShow` handler doing it. (I left widgets doing it in `update` instead of `init` alone, on the assumption that callers *may* be relying on that behavior when updating widgets at runtime. This might actually never matter, and it certainly didn't for ScreenSaverWidget, which is why I removed it from there ;p).
Use texteditor if available
Auto disable if patches folder doesnt exist
And show a restart message after file edit
Sort menu entries in execution order
Warning sign for failing patches
Use both a whitelist for targeted widget repaints, a blacklist for no repaint at all, and a fallback for a full in-order ReaderUI repaint when unsure.
Use a similar approach in ReaderHeader (i.e., prevent explicit refreshes while ReaderMenu is open).
Re #9979, re #9768
isWifiOn for kindle currently returns if the interface is connected, change this to doing what is says isWifiOn the file is only present if the wireless interface is up.
isConnected pings the gateway, rely on the kernel for a more reliable check.
Whan connecting to my android phone's wifi hotspot to remote debug from my phone, the network is connected yet the phone(gateway) does not respond to pings leading koreader to shut down the connection thinking it is unsuccessful
* Move natural sorting algo to a dedicated sort module to avoid code duplication
* Use a slightly more accurate algorithm, and speed it up by caching intermediary strings
* Calibre: Use natural sorting in metadata search (fix#10009)
Apparently, toggling the rtc interrupt doesn't quite work on some boards? (fix#10031)
(Drive-by tweak to UIManager: Less confusing logging when quit gets tripped both via quit
and _gated_quit (i.e., on poweroff))
Abort earlier if the nearest link is too far, instead of computing stuff and creating an object we'll never actually use.
Includes minor logging tweaks to vaguely related codepaths ;p.
Prevent any later hold_release event from being handled
by MovableContainer as a moving touch+hold_release.
This issue was noticable when closing DictQuickLookup
with long-press on close, resulting in the movable
highlight actions ButtonTable moving to where the
long-press happened.
The x and y coordinates of SortItemWidget's checkmark widgets were not updated, thus remained at their initial value 0.
Consequently the intersectWith check in SortItemWidget:onTap always evaluated to false, resulting in taps on checkmarks in the sort widget not being recognized.
Co-authored-by: NiLuJe <ninuje@gmail.com>
Go through a dedicated sticky invisible widget instead of piggybacking
on ScreenSaverWidget, so that we behave if there are other InputContainers
in ScreenSaverWidget, or if there isn't any ScreenSaverWidget at all.
Fix#9911, fix#9955
I'm not *quite* sure what's responsible for inverting the padding
values, since the only Widget I can see doing that is FrameContainer,
and I can't find any in that Widget chain, but, oh, well.
Easily reproducible with the FileManager's TitleBar left/right buttons
(i.e., Home & Plus).
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
- Cleanup search and animation codes, fix inconsistencies
between animation/no-animation opening, and refreshes
glitches on eInk.
- Show menu item on tap, with buttons to either open
directly, or to walk there (removed earlier "Animation"
checkbox, so the choice can be decided later).
- Move event handlers into ReaderMenu/FileManagerMenu.
- Avoid duplicated and confusing results from gestures
and font-family submenus.
Exclude some screensaver option showing book content
(title, page image) when "Exclude this book cover" is checked.
Random image as fallback, KOReader logo as 2nd-order fallback.
If there are hidden flows, this calculates the current page, total pages, percent, time left in chapter, and time left in the magic variables used in screensaver message only for the current flow. If there are no hidden flows, the behavior is the same as before.
Adds the ability to re-assign which book a word belongs to
and change the name of an existing book. It can be used as
a way to regroup words and hide/show them by book.
This is made easier by the fact that only a single method in a single
widget actually handles Gesture, and that we barely ever overload it.
So, apply a bit of monkey-patching trickery to handle the magic :).
Fix#9695
defaults.persistent.lua
We were pcall'ing the parsing, but not the execution...
The funky Lua syntax quirks means that it is possible to pass the former
but not the latter ;).
Fix#9700, de-facto regression since #9546
Get rid of the doc & seqtext fields, as they are not actually used (nor
are they particularly useful, the event handler's name should be pretty
self-explanatory).
Also, tweak the key_events documentation to highlight the quirks of the
API, especially as far as array nesting is involved...
Random drive-by cleanup of the declarations of key_events & ges_events
to re-use the existing instance object (now that we know they're sane
;p) for tables with a single member (less GC pressure).
* Added a new plugin external-keyboard. It listens to USB events. When keyboard is plugged in or plugged out, it updates device and input configuration accordingly.
* Added new fake events UsbDevicePlugIn and UsbDevicePlugOut that are emitted when a device is connected to a book reader that plays the role of USB host. The usage of the existing events UsbPlugIn and UsbPlugOut has not changed - they are used when a reader is connected to a host. The koreader-base has a related PR for those events.
* Did a small refactoring of initialization for the modules FocusManager and InputText. They check device keyboard capabilities on their when the module is first loaded and store it. Some of the initialization code has been extracted into functions, so that we can re-initialize them when keyboard is (dis)connected.
* Initial implementation centered around text input, and tested with USB keyboards on devices with OTG support.
* Said OTG shenanigans are so far supported on devices with debugfs & the chipidea driver, or sunxi devices.
If you've ever enabled the main loop debugging, you'll know that
actually dumping the full window stack was *hilarious*.
Just print table counts, it's often good enough to debug what's
happening in the exceedingly rare cases you need this ;).
Also, it'll actually be readable, unlike the previous insanity ^^.
This PR makes zh_keyboard's number pad symbol mode instead of shift mode, so that numbers are shown when the keyboard is called expecting numeral input.
* Iterate over varargs directly via select if possible
* Use table.pack otherwise (https://github.com/koreader/koreader-base/pull/1535).
* This allows us to simplify a few Logger calls, as logger now handles nil values.
This PR adds support for a Thai keyboard. Layout mostly copied from my phone, with difference in diacritics placements: phone has only one key for all of them, while here we have a couple more. Swipe in different directions needed for inputing them.
