Crate log

A lightweight logging facade.

The log crate provides a single logging API that abstracts over the actual logging implementation. Libraries can use the logging API provided by this crate, and the consumer of those libraries can choose the logging implementation that is most suitable for its use case.

If no logging implementation is selected, the facade falls back to a "noop" implementation that ignores all log messages. The overhead in this case is very small - just an integer load, comparison and jump.

A log request consists of a target, a level, and a body. A target is a string which defaults to the module path of the location of the log request, though that default may be overridden. Logger implementations typically use the target to filter requests based on some user configuration.

Use

The basic use of the log crate is through the five logging macros: error!, warn!, info!, debug! and trace! where error! represents the highest-priority log messages and trace! the lowest. The log messages are filtered by configuring the log level to exclude messages with a lower priority. Each of these macros accept format strings similarly to println!.

In libraries

Libraries should link only to the log crate, and use the provided macros to log whatever information will be useful to downstream consumers.

Examples

use log::{info, warn};

pub fn shave_the_yak(yak: &mut Yak) {
    info!(target: "yak_events", "Commencing yak shaving for {:?}", yak);

    loop {
        match find_a_razor() {
            Ok(razor) => {
                info!("Razor located: {}", razor);
                yak.shave(razor);
                break;
            }
            Err(err) => {
                warn!("Unable to locate a razor: {}, retrying", err);
            }
        }
    }
}

In executables

Executables should choose a logging implementation and initialize it early in the runtime of the program. Logging implementations will typically include a function to do this. Any log messages generated before the implementation is initialized will be ignored.

The executable itself may use the log crate to log as well.

Warning

The logging system may only be initialized once.

Available logging implementations

In order to produce log output executables have to use a logger implementation compatible with the facade. There are many available implementations to choose from, here are some of the most popular ones:

• Simple minimal loggers:
  • env_logger
  • simple_logger
  • simplelog
  • pretty_env_logger
  • stderrlog
  • flexi_logger
• Complex configurable frameworks:
  • log4rs
  • fern
• Adaptors for other facilities:
  • syslog
  • slog-stdlog

Implementing a Logger

Loggers implement the Log trait. Here's a very basic example that simply logs all messages at the Error, Warn or Info levels to stdout:

use log::{Record, Level, Metadata};

struct SimpleLogger;

impl log::Log for SimpleLogger {
    fn enabled(&self, metadata: &Metadata) -> bool {
        metadata.level() <= Level::Info
    }

    fn log(&self, record: &Record) {
        if self.enabled(record.metadata()) {
            println!("{} - {}", record.level(), record.args());
        }
    }

    fn flush(&self) {}
}

Loggers are installed by calling the set_logger function. The maximum log level also needs to be adjusted via the set_max_level function. The logging facade uses this as an optimization to improve performance of log messages at levels that are disabled. It's important to set it, as it defaults to Off, so no log messages will ever be captured! In the case of our example logger, we'll want to set the maximum log level to Info, since we ignore any Debug or Trace level log messages. A logging implementation should provide a function that wraps a call to set_logger and set_max_level, handling initialization of the logger:

use log::{SetLoggerError, LevelFilter};

static LOGGER: SimpleLogger = SimpleLogger;

pub fn init() -> Result<(), SetLoggerError> {
    log::set_logger(&LOGGER)
        .map(|()| log::set_max_level(LevelFilter::Info))
}

Implementations that adjust their configurations at runtime should take care to adjust the maximum log level as well.

Use with std

set_logger requires you to provide a &'static Log, which can be hard to obtain if your logger depends on some runtime configuration. The set_boxed_logger function is available with the std Cargo feature. It is identical to set_logger except that it takes a Box<Log> rather than a &'static Log:

pub fn init() -> Result<(), SetLoggerError> {
    log::set_boxed_logger(Box::new(SimpleLogger))
        .map(|()| log::set_max_level(LevelFilter::Info))
}

Compile time filters

Log levels can be statically disabled at compile time via Cargo features. Log invocations at disabled levels will be skipped and will not even be present in the resulting binary. This level is configured separately for release and debug builds. The features are:

• max_level_off
• max_level_error
• max_level_warn
• max_level_info
• max_level_debug
• max_level_trace
• release_max_level_off
• release_max_level_error
• release_max_level_warn
• release_max_level_info
• release_max_level_debug
• release_max_level_trace

These features control the value of the STATIC_MAX_LEVEL constant. The logging macros check this value before logging a message. By default, no levels are disabled.

Libraries should avoid using the max level features because they're global and can't be changed once they're set.

For example, a crate can disable trace level logs in debug builds and trace, debug, and info level logs in release builds with the following configuration:

[dependencies]
log = { version = "0.4", features = ["max_level_debug", "release_max_level_warn"] }

Crate Feature Flags

The following crate feature flags are available in addition to the filters. They are configured in your Cargo.toml.

• std allows use of std crate instead of the default core. Enables using std::error and set_boxed_logger functionality.
• serde enables support for serialization and deserialization of Level and LevelFilter.

[dependencies]
log = { version = "0.4", features = ["std", "serde"] }

Version compatibility

The 0.3 and 0.4 versions of the log crate are almost entirely compatible. Log messages made using log 0.3 will forward transparently to a logger implementation using log 0.4. Log messages made using log 0.4 will forward to a logger implementation using log 0.3, but the module path and file name information associated with the message will unfortunately be lost.

Macros

debug	Logs a message at the debug level.
error	Logs a message at the error level.
info	Logs a message at the info level.
log	The standard logging macro.
log_enabled	Determines if a message logged at the specified level in that module will be logged.
trace	Logs a message at the trace level.
warn	Logs a message at the warn level.

Structs

Metadata	Metadata about a log message.
MetadataBuilder	Builder for Metadata.
ParseLevelError	The type returned by from_str when the string doesn't match any of the log levels.
Record	The "payload" of a log message.
RecordBuilder	Builder for Record.
SetLoggerError	The type returned by set_logger if set_logger has already been called.

Enums

Level	An enum representing the available verbosity levels of the logger.
LevelFilter	An enum representing the available verbosity level filters of the logger.

Constants

STATIC_MAX_LEVEL

The statically resolved maximum log level.

Traits

Log	A trait encapsulating the operations required of a logger.

Functions

logger	Returns a reference to the logger.
max_level	Returns the current maximum log level.
set_boxed_logger	Sets the global logger to a Box<Log>.
set_logger	Sets the global logger to a &'static Log.
set_logger_racy⚠	A thread-unsafe version of set_logger.
set_max_level	Sets the global maximum log level.