|
|
# Dumb switch with wifi AP
|
|
|
|
|
|
## Objective
|
|
|
|
|
|
* every single port bridged, device acting like a switch
|
|
|
* wifi being bridged to the same network
|
|
|
* automatic IP assigned
|
|
|
* no DHCP, no NAT, no nothing, just like a dumb switch with wifi thats all
|
|
|
|
|
|
## Steps
|
|
|
|
|
|
Clear any config
|
|
|
|
|
|
* System > Reset Configuration > No Default Configuration
|
|
|
|
|
|
---
|
|
|
|
|
|
**Bridge**
|
|
|
|
|
|
* Bridge > add bridge1
|
|
|
* Ports > add > All interfaces to bridge1
|
|
|
|
|
|
*winbox will reconnect*
|
|
|
|
|
|
---
|
|
|
|
|
|
**IP**
|
|
|
|
|
|
*dynamic*
|
|
|
|
|
|
* IP > DHCP client > add > interface bridge, rest defaults
|
|
|
|
|
|
*static*
|
|
|
|
|
|
* IP > Addresses > add >
|
|
|
* Address - 192.168.88.2/24
|
|
|
* Network - it gets filled out automatically on ok/apply based on subnet mask in address
|
|
|
* interface - bridge
|
|
|
|
|
|
---
|
|
|
|
|
|
2ghz
|
|
|
|
|
|
* Wireless > open 2ghz interface > Wireless tab > click Advanced Mode > in this tab
|
|
|
* change Mode from station to ap bridge
|
|
|
* change Band to 2Ghz- B/G/N
|
|
|
* Channel Width stay at 20Mhz if lot of wifi around you, go to 40Mhz if not
|
|
|
* Frequency - pick a channel \[1-2412 ; 6-2437; 11-2462\]
|
|
|
* SSID - pick a name
|
|
|
* Radio Name - if you you want to distingush between APs with same SSID?
|
|
|
* Skip DFS channels - all
|
|
|
* Security Profile - just make note of the one set there, should be default
|
|
|
* WPS mode - disable
|
|
|
* Country - pick yours
|
|
|
|
|
|
-------------
|
|
|
|
|
|
5ghz
|
|
|
|
|
|
* Wireless > open 5ghz interface > Wireless tab > click Advanced Mode > in this tab
|
|
|
* change Mode from station to ap bridge
|
|
|
* change Band to 5Ghz- N/AC
|
|
|
* Channel Width 20/40/80Mhz XXXX
|
|
|
* Frequency - auto?
|
|
|
* SSID - pick a name
|
|
|
* Radio Name - if you you want to distingush between APs with same SSID?
|
|
|
* Skip DFS channels - all
|
|
|
* Security Profile - just make note of the one set there, should be default
|
|
|
* WPS mode - disable
|
|
|
* Country - pick yours
|
|
|
|
|
|
---------------
|
|
|
|
|
|
security
|
|
|
|
|
|
* Wireless > Security Profiles > default
|
|
|
* change Mode to dynamic keys
|
|
|
* check WPA PSK and WPA2 PSK
|
|
|
* set passwords in WPA/WPA2 pre-shared key inputs
|
|
|
|
|
|
------------
|