mirror of
https://github.com/Genymobile/scrcpy
synced 2024-11-11 01:10:32 +00:00
239 lines
6.2 KiB
Markdown
239 lines
6.2 KiB
Markdown
# Video
|
||
|
||
## Source
|
||
|
||
By default, scrcpy mirrors the device screen.
|
||
|
||
It is possible to capture the device camera instead.
|
||
|
||
See the dedicated [camera](camera.md) page.
|
||
|
||
|
||
## Size
|
||
|
||
By default, scrcpy attempts to mirror at the Android device resolution.
|
||
|
||
It might be useful to mirror at a lower definition to increase performance. To
|
||
limit both width and height to some maximum value (here 1024):
|
||
|
||
```bash
|
||
scrcpy --max-size=1024
|
||
scrcpy -m 1024 # short version
|
||
```
|
||
|
||
The other dimension is computed so that the Android device aspect ratio is
|
||
preserved. That way, a device in 1920×1080 will be mirrored at 1024×576.
|
||
|
||
If encoding fails, scrcpy automatically tries again with a lower definition
|
||
(unless `--no-downsize-on-error` is enabled).
|
||
|
||
|
||
## Bit rate
|
||
|
||
The default video bit rate is 8 Mbps. To change it:
|
||
|
||
```bash
|
||
scrcpy --video-bit-rate=2M
|
||
scrcpy --video-bit-rate=2000000 # equivalent
|
||
scrcpy -b 2M # short version
|
||
```
|
||
|
||
|
||
## Frame rate
|
||
|
||
The capture frame rate can be limited:
|
||
|
||
```bash
|
||
scrcpy --max-fps=15
|
||
```
|
||
|
||
The actual capture frame rate may be printed to the console:
|
||
|
||
```
|
||
scrcpy --print-fps
|
||
```
|
||
|
||
It may also be enabled or disabled at anytime with <kbd>MOD</kbd>+<kbd>i</kbd>
|
||
(see [shortcuts](shortcuts.md)).
|
||
|
||
The frame rate is intrinsically variable: a new frame is produced only when the
|
||
screen content changes. For example, if you play a fullscreen video at 24fps on
|
||
your device, you should not get more than 24 frames per second in scrcpy.
|
||
|
||
|
||
## Codec
|
||
|
||
The video codec can be selected. The possible values are `h264` (default),
|
||
`h265` and `av1`:
|
||
|
||
```bash
|
||
scrcpy --video-codec=h264 # default
|
||
scrcpy --video-codec=h265
|
||
scrcpy --video-codec=av1
|
||
```
|
||
|
||
H265 may provide better quality, but H264 should provide lower latency.
|
||
AV1 encoders are not common on current Android devices.
|
||
|
||
For advanced usage, to pass arbitrary parameters to the [`MediaFormat`],
|
||
check `--video-codec-options` in the manpage or in `scrcpy --help`.
|
||
|
||
[`MediaFormat`]: https://developer.android.com/reference/android/media/MediaFormat
|
||
|
||
|
||
## Encoder
|
||
|
||
Several encoders may be available on the device. They can be listed by:
|
||
|
||
```bash
|
||
scrcpy --list-encoders
|
||
```
|
||
|
||
Sometimes, the default encoder may have issues or even crash, so it is useful to
|
||
try another one:
|
||
|
||
```bash
|
||
scrcpy --video-codec=h264 --video-encoder='OMX.qcom.video.encoder.avc'
|
||
```
|
||
|
||
|
||
## Orientation
|
||
|
||
The orientation may be applied at 3 different levels:
|
||
- The [shortcut](shortcuts.md) <kbd>MOD</kbd>+<kbd>r</kbd> requests the
|
||
device to switch between portrait and landscape (the current running app may
|
||
refuse, if it does not support the requested orientation).
|
||
- `--lock-video-orientation` changes the mirroring orientation (the orientation
|
||
of the video sent from the device to the computer). This affects the
|
||
recording.
|
||
- `--orientation` is applied on the client side, and affects display and
|
||
recording. For the display, it can be changed dynamically using
|
||
[shortcuts](shortcuts.md).
|
||
|
||
To lock the mirroring orientation (on the capture side):
|
||
|
||
```bash
|
||
scrcpy --lock-video-orientation # initial (current) orientation
|
||
scrcpy --lock-video-orientation=0 # natural orientation
|
||
scrcpy --lock-video-orientation=90 # 90° clockwise
|
||
scrcpy --lock-video-orientation=180 # 180°
|
||
scrcpy --lock-video-orientation=270 # 270° clockwise
|
||
```
|
||
|
||
To orient the video (on the rendering side):
|
||
|
||
```bash
|
||
scrcpy --orientation=0
|
||
scrcpy --orientation=90 # 90° clockwise
|
||
scrcpy --orientation=180 # 180°
|
||
scrcpy --orientation=270 # 270° clockwise
|
||
scrcpy --orientation=flip0 # hflip
|
||
scrcpy --orientation=flip90 # hflip + 90° clockwise
|
||
scrcpy --orientation=flip180 # vflip (hflip + 180°)
|
||
scrcpy --orientation=flip270 # hflip + 270° clockwise
|
||
```
|
||
|
||
The orientation can be set separately for display and record if necessary, via
|
||
`--display-orientation` and `--record-orientation`.
|
||
|
||
The rotation is applied to a recorded file by writing a display transformation
|
||
to the MP4 or MKV target file. Flipping is not supported, so only the 4 first
|
||
values are allowed when recording.
|
||
|
||
|
||
## Crop
|
||
|
||
The device screen may be cropped to mirror only part of the screen.
|
||
|
||
This is useful, for example, to mirror only one eye of the Oculus Go:
|
||
|
||
```bash
|
||
scrcpy --crop=1224:1440:0:0 # 1224x1440 at offset (0,0)
|
||
```
|
||
|
||
The values are expressed in the device natural orientation (portrait for a
|
||
phone, landscape for a tablet).
|
||
|
||
If `--max-size` is also specified, resizing is applied after cropping.
|
||
|
||
|
||
## Display
|
||
|
||
If several displays are available on the Android device, it is possible to
|
||
select the display to mirror:
|
||
|
||
```bash
|
||
scrcpy --display-id=1
|
||
```
|
||
|
||
The list of display ids can be retrieved by:
|
||
|
||
```bash
|
||
scrcpy --list-displays
|
||
```
|
||
|
||
A secondary display may only be controlled if the device runs at least Android
|
||
10 (otherwise it is mirrored as read-only).
|
||
|
||
|
||
## Buffering
|
||
|
||
By default, there is no video buffering, to get the lowest possible latency.
|
||
|
||
Buffering can be added to delay the video stream and compensate for jitter to
|
||
get a smoother playback (see [#2464]).
|
||
|
||
[#2464]: https://github.com/Genymobile/scrcpy/issues/2464
|
||
|
||
The configuration is available independently for the display,
|
||
[v4l2 sinks](video.md#video4linux) and [audio](audio.md#buffering) playback.
|
||
|
||
```bash
|
||
scrcpy --display-buffer=50 # add 50ms buffering for display
|
||
scrcpy --v4l2-buffer=300 # add 300ms buffering for v4l2 sink
|
||
scrcpy --audio-buffer=200 # set 200ms buffering for audio playback
|
||
```
|
||
|
||
They can be applied simultaneously:
|
||
|
||
```bash
|
||
scrcpy --display-buffer=50 --v4l2-buffer=300
|
||
```
|
||
|
||
|
||
## No playback
|
||
|
||
It is possible to capture an Android device without playing video or audio on
|
||
the computer. This option is useful when [recording](recording.md) or when
|
||
[v4l2](#video4linux) is enabled:
|
||
|
||
```bash
|
||
scrcpy --v4l2-sink=/dev/video2 --no-playback
|
||
scrcpy --record=file.mkv --no-playback
|
||
# interrupt with Ctrl+C
|
||
```
|
||
|
||
It is also possible to disable video and audio playback separately:
|
||
|
||
```bash
|
||
# Send video to V4L2 sink without playing it, but keep audio playback
|
||
scrcpy --v4l2-sink=/dev/video2 --no-video-playback
|
||
|
||
# Record both video and audio, but only play video
|
||
scrcpy --record=file.mkv --no-audio-playback
|
||
```
|
||
|
||
|
||
## No video
|
||
|
||
To disable video forwarding completely, so that only audio is forwarded:
|
||
|
||
```
|
||
scrcpy --no-video
|
||
```
|
||
|
||
|
||
## Video4Linux
|
||
|
||
See the dedicated [Video4Linux](v4l2.md) page.
|