@ -186,7 +186,7 @@ increase performance.
To limit both the width and height to some value (e.g. 1024):
To limit both the width and height to some value (e.g. 1024):
```bash
```bash
scrcpy --max-size 1024
scrcpy --max-size= 1024
scrcpy -m 1024 # short version
scrcpy -m 1024 # short version
```
```
@ -199,7 +199,7 @@ preserved. That way, a device in 1920× 1080 will be mirrored at 1024× 576.
The default bit-rate is 8 Mbps. To change the video bitrate (e.g. to 2 Mbps):
The default bit-rate is 8 Mbps. To change the video bitrate (e.g. to 2 Mbps):
```bash
```bash
scrcpy --bit-rate 2M
scrcpy --bit-rate= 2M
scrcpy -b 2M # short version
scrcpy -b 2M # short version
```
```
@ -208,7 +208,7 @@ scrcpy -b 2M # short version
The capture frame rate can be limited:
The capture frame rate can be limited:
```bash
```bash
scrcpy --max-fps 15
scrcpy --max-fps= 15
```
```
This is officially supported since Android 10, but may work on earlier versions.
This is officially supported since Android 10, but may work on earlier versions.
@ -229,7 +229,7 @@ The device screen may be cropped to mirror only part of the screen.
This is useful, for example, to mirror only one eye of the Oculus Go:
This is useful, for example, to mirror only one eye of the Oculus Go:
```bash
```bash
scrcpy --crop 1224:1440:0:0 # 1224x1440 at offset (0,0)
scrcpy --crop= 1224:1440:0:0 # 1224x1440 at offset (0,0)
```
```
If `--max-size` is also specified, resizing is applied after cropping.
If `--max-size` is also specified, resizing is applied after cropping.
@ -258,14 +258,14 @@ Some devices have more than one encoder, and some of them may cause issues or
crash. It is possible to select a different encoder:
crash. It is possible to select a different encoder:
```bash
```bash
scrcpy --encoder OMX.qcom.video.encoder.avc
scrcpy --encoder= OMX.qcom.video.encoder.avc
```
```
To list the available encoders, you can pass an invalid encoder name; the
To list the available encoders, you can pass an invalid encoder name; the
error will give the available encoders:
error will give the available encoders:
```bash
```bash
scrcpy --encoder _
scrcpy --encoder= _
```
```
### Capture
### Capture
@ -275,14 +275,14 @@ scrcpy --encoder _
It is possible to record the screen while mirroring:
It is possible to record the screen while mirroring:
```bash
```bash
scrcpy --record file.mp4
scrcpy --record= file.mp4
scrcpy -r file.mkv
scrcpy -r file.mkv
```
```
To disable mirroring while recording:
To disable mirroring while recording:
```bash
```bash
scrcpy --no-display --record file.mp4
scrcpy --no-display --record= file.mp4
scrcpy -Nr file.mkv
scrcpy -Nr file.mkv
# interrupt recording with Ctrl+C
# interrupt recording with Ctrl+C
```
```
@ -431,7 +431,7 @@ none found, try running `adb disconnect`, and then run those two commands again.
It may be useful to decrease the bit-rate and the resolution:
It may be useful to decrease the bit-rate and the resolution:
```bash
```bash
scrcpy --bit-rate 2M --max-size 800
scrcpy --bit-rate=2M --max-size= 800
scrcpy -b2M -m800 # short version
scrcpy -b2M -m800 # short version
```
```
@ -443,7 +443,7 @@ scrcpy -b2M -m800 # short version
If several devices are listed in `adb devices` , you can specify the _serial_ :
If several devices are listed in `adb devices` , you can specify the _serial_ :
```bash
```bash
scrcpy --serial 0123456789abcdef
scrcpy --serial= 0123456789abcdef
scrcpy -s 0123456789abcdef # short version
scrcpy -s 0123456789abcdef # short version
```
```
@ -453,7 +453,7 @@ The serial may also be provided via the environment variable `ANDROID_SERIAL`
If the device is connected over TCP/IP:
If the device is connected over TCP/IP:
```bash
```bash
scrcpy --serial 192.168.0.1:5555
scrcpy --serial= 192.168.0.1:5555
scrcpy -s 192.168.0.1:5555 # short version
scrcpy -s 192.168.0.1:5555 # short version
```
```
@ -606,7 +606,7 @@ scrcpy --force-adb-forward
Like for wireless connections, it may be useful to reduce quality:
Like for wireless connections, it may be useful to reduce quality:
```
```
scrcpy -b2M -m800 --max-fps 15
scrcpy -b2M -m800 --max-fps= 15
```
```
### Window configuration
### Window configuration
@ -616,7 +616,7 @@ scrcpy -b2M -m800 --max-fps 15
By default, the window title is the device model. It can be changed:
By default, the window title is the device model. It can be changed:
```bash
```bash
scrcpy --window-title 'My device'
scrcpy --window-title= 'My device'
```
```
#### Position and size
#### Position and size
@ -624,7 +624,7 @@ scrcpy --window-title 'My device'
The initial window position and size may be specified:
The initial window position and size may be specified:
```bash
```bash
scrcpy --window-x 100 --window-y 100 --window-width 800 --window-height 600
scrcpy --window-x=100 --window-y=100 --window-width=800 --window-height= 600
```
```
#### Borderless
#### Borderless
@ -659,7 +659,7 @@ Fullscreen can then be toggled dynamically with <kbd>MOD</kbd>+<kbd>f</kbd>.
The window may be rotated:
The window may be rotated:
```bash
```bash
scrcpy --rotation 1
scrcpy --rotation= 1
```
```
Possible values:
Possible values:
@ -701,7 +701,7 @@ If several displays are available, it is possible to select the display to
mirror:
mirror:
```bash
```bash
scrcpy --display 1
scrcpy --display= 1
```
```
The list of display ids can be retrieved by:
The list of display ids can be retrieved by: