64 KiB
Embedded Rust
This is a curated list of resources related to embedded and low-level programming in the programming language Rust, including a list of useful crates.
This project is developed and maintained by the Resources team.
Don't see something you want or need here? Add it to the Not Yet Awesome Embedded Rust list!
Table of contents
- Community
- Books, blogs and training materials
- Tools
- Real-time
- Peripheral Access Crates
- HAL implementation crates
- Architecture support crates
- Board support crates
- Component abstraction crates
- Driver crates
- no-std crates
- Rust forks
- Firmware projects
- License
Community
In 2018 the Rust community created an embedded working group to help drive adoption in the Rust ecosystem.
- Embedded WG, including newsletters with progress updates.
Community Chat Rooms
- You can usually find community members (including embedded WG members) in the official
#rust-embedded:matrix.org
Matrix room. - embedded.rs - Telegram chat about Rust for microcontrollers in the Russian language.
- #esp-rs:matrix.org - For discussion of using Embedded Rust on Xtensa devices
- #nrf-rs:matrix.org - For discussion of using Embedded Rust on Nordic Semiconductor devices
- #probe-rs:matrix.org - For discussion of the Probe-rs debugging toolkit
- #rtfm-rs:matrix.org - For discussion of the Real Time for The Masses concurrency framework
- #rust-embedded-graphics:matrix.org - For discussion of the
embedded-graphics
crate and ecosystem
Books, blogs and training materials
- The Embedded Rust Book - An introductory book about using the Rust Programming Language on "Bare Metal" embedded systems, such as Microcontrollers.
- Discovery by @rust-embedded — this book is an introductory course on microcontroller-based embedded systems that uses Rust as the teaching language. Original author: @japaric
- Cortex-M Quickstart by @japaric – a template and introduction to embedded Rust, suitable for developers familiar to embedded development but new to embedded Rust.
- Exploring Rust on Teensy by @branan — Beginner set of articles on getting into embedded dev in Rust.
- Pragmatic Bare Metal Rust A starter article about starting Rust development on STM32 microcontrollers (cubeMX + FFI).
- Using Rust in an Embedded Project: A Simple Example Article and some links on setting up Rust cross-compiling.
- Robigalia general purpose robust operating system in Rust running on secure seL4 microkernel.
- intermezzOS A small teaching operating system in Rust. A book with some explanations is also included.
- Raspberry Pi Bare Metal Programming with Rust
- 32-bit Version (most Pi1 and Pi2 variants) A starter article on OSdev with Rust on RPi (cross-compiler setup and a very basic LED-blinking kernel).
- Fearless concurrency by @japaric — How to easily develop Rust programs for pretty much any ARM Cortex-M microcontroller with memory-safe concurrency.
- MicroRust Introductory book for embedded development in Rust on the micro:bit.
- Physical Computing With Rust A (WIP) guide to physical computing with Rust on the Raspberry Pi.
- Internet of Streams A video series by @jamesmunns building a bare metal IoT Sensor Node Platform from (nearly) scratch in Rust
- Writing an embedded OS in Rust on the Raspberry Pi A set of tutorials that give a guided, step-by-step tour of how to write a monolithic Operating System kernel for an embedded system from scratch. Runs on the Raspberry Pi 3 and the Raspberry Pi 4.
Tools
- xargo Rust package manager with support for non-default std libraries — build rust runtime for your own embedded system.
- xargo is great but it's in maintenance mode, cargo-xbuild is catching up as intended replacement.
- svd2rust Generate Rust structs with register mappings from SVD files.
- μtest unit testing for microcontrollers and other no-std systems.
- embedded-hal-mock Mock implementation of
embedded-hal
traits for testing without accessing real hardware. - - bindgen Automatically generates Rust FFI bindings to C and C++ libraries. -
- cortex-m semihosting Semihosting for ARM Cortex-M processors
- bobbin-cli A Rust command line tool to simplify embedded development and deployment.
- cargo-fel4 A Cargo subcommand for working with feL4 projects. -
- cargo-flash A small cargo subcommand to download your binary to your target chip. -
- cargo-embed A superset of cargo-flash with additional useful features like configuration file support, a RTT terminal or a GDB server. -
Real-time
Real-time Operating System (RTOS)
- Drone OS An Embedded Operating System for writing real-time applications in Rust.
- FreeRTOS.rs Rust interface for the FreeRTOS API
- FreeRTOS-rust Rust interface for FreeRTOS with Rust entry point and build support crate.
- Tock An embedded operating system designed for running multiple concurrent, mutually distrustful applications on low-memory and low-power microcontrollers
Real-time tools
- RTFM v0.5 Real-Time For the Masses — A concurrency framework for building real time systems:
- cortex-m rtfm RTFM framework for ARM Cortex-M microcontrollers
- msp430 rtfm RTFM framework for MSP430 MCUs
Peripheral Access Crates
Register definition for microcontroller families. Usually generated using svd2rust
. -
Peripheral Access Crates were also called Device Crates.
NOTE You may be able to find even more peripheral access crates by searching for the
svd2rust
keyword on crates.io!
Microchip
atsamd11
Peripheral access API for Microchip (formerly Atmel) SAMD11 microcontrollers. This git repo hosts both the peripheral access crate and the hal.atsamd21
Peripheral access API for Microchip (formerly Atmel) SAMD21 microcontrollers. This git repo hosts both the peripheral access crate and the hal.atsamd51
Peripheral access API for Microchip (formerly Atmel) SAMD51 microcontrollers. This git repo hosts both the peripheral access crate and the hal.atsame54
Peripheral access API for Microchip (formerly Atmel) SAME54 microcontrollers. This git repo hosts both the peripheral access crate and the hal.avr-device
Peripheral access API for Microchip (formerly Atmel) AVR microcontroller family.sam3x8e
Peripheral access API for Atmel SAMD3X8E microcontrollers (generated using svd2rust) -
Nordic
nrf51
Peripheral access API for nRF51 microcontrollers (generated using svd2rust) -nrf52810-pac
- Peripheral access API for the nRF52810 microcontroller (generated using svd2rust) -nrf52832-pac
- Peripheral access API for the nRF52832 microcontroller (generated using svd2rust) -nrf52840-pac
- Peripheral access API for the nRF52840 microcontroller (generated using svd2rust) -
NXP
k64
-lpc11uxx
-lpc55s6x-pac
-lpc82x-pac
-lpc845-pac
-mkw41z
-imxrt-ral
Register access layer for i.MX RT series. -
SiFive
e310x
- svd2rust generated interface to SiFive Freedom E310 MCUs -
Silicon Labs
efm32pg12-pac
- Peripheral access API for Silicon Labs EFM32PG12 microcontrollers -
STMicroelectronics
The stm32-rs
project has peripheral access APIs for most STM32 microcontrollers (generated using svd2rust):
stm32f0
-stm32f1
-stm32f2
-stm32f3
-stm32f4
-stm32f7
-stm32g0
-stm32g4
-stm32h7
-stm32l0
-stm32l1
-stm32l4
-
Texas Instruments
tm4c123x
Peripheral access API for TM4C123x microcontrollers (generated using svd2rust)tm4c129x
Peripheral access API for TM4C129x microcontrollers (generated using svd2rust)
MSP430
msp430g2553
Peripheral access API for MSP430G2553 microcontrollers (generated using svd2rust)- msp430 quickstart some examples for msp430
msp430fr2355
Peripheral access API for MSP430FR2355 microcontrollers (generated using svd2rust)
Ambiq Micro
ambiq-apollo1-pac
Peripheral access API for Ambiq Apollo 1 microcontrollers (generated using svd2rust)ambiq-apollo2-pac
Peripheral access API for Ambiq Apollo 2 microcontrollers (generated using svd2rust)ambiq-apollo3-pac
Peripheral access API for Ambiq Apollo 3 microcontrollers (generated using svd2rust)ambiq-apollo3p-pac
Peripheral access API for Ambiq Apollo 3 Plus microcontrollers (generated using svd2rust)
GigaDevice
gd32vf103-pac
Peripheral access API for GD32VF103 RISC-V microcontrollers (generated using svd2rust) -
XMC
Peripheral access crates for the different XMC4xxx families of microcontrollers
HAL implementation crates
Implementations of embedded-hal
for microcontroller families and systems running some OS. -
NOTE You may be able to find even more HAL implementation crates by searching for the
embedded-hal-impl
and embedded-hal
keywords on crates.io!
OS
bitbang-hal
software protocol implementations for microcontrollers with digital::OutputPin and digital::InputPinftdi-embedded-hal
for FTDI FTx232H chips connected to Linux systems via USBlinux-embedded-hal
for embedded Linux systems like the Raspberry Pi. -
Microchip
atsamd-hal
- HAL for SAMD11, SAMD21, SAMD51 and SAME54 -avr-hal
- HAL for AVR microcontroller family and AVR-based boards
Nordic
NXP
Also check the list of NXP board support crates!
lpc55s6x-hal
-lpc8xx-hal
- HAL for lpc82x and lpc845 -mkw41z-hal
-imxrt-hal
- HAL for i.MX RT series. -
SiFive
e310x-hal
- HAL for SiFive Freedom E310 MCUs -
STMicroelectronics
Also check the list of STMicroelectronics board support crates!
stm32f0xx-hal
-- Has examples that can run on boards like the Nucleo-F042K6 and similar boards
stm32f1xx-hal
-- Can be run on boards like the Blue pill, Nucleo-F103RB and similar boards
stm32f3xx-hal
-stm32f4xx-hal
-- Generic HAL implementation for all MCUs of the stm32f4 series
stm32f7xx-hal
-- Generic HAL implementation for all MCUs of the stm32f7 series
stm32g0xx-hal
-stm32h7xx-hal
-- HAL implementation for the STMicro STM32H7xx family of microcontrollers
stm32l0xx-hal
-- HAL implementation for the the STMicro STM32L0xx family of microcontrollers
stm32l1xx-hal
-stm32l151-hal
-stm32l4xx-hal
-- Generic hal support for stm32l4 devices, has examples that can run on boards like the Nucleo-L432KC, Solo, and similar boards
Texas Instruments
MSP430
msp430fr2x5x-hal
- HAL implementation for the MSP430FR2x5x family of microcontrollers
Espressif
esp8266-hal
(not supported by rustc, so must be built with mrustc, typically via the esp-rs build script)rust-xtensa
- rust fork enables projects to be built for the ESP32 and ESP8266. (quick start repo).
Silicon Labs
tomu-hal
- HAL implementation targeted for Tomu USB board with EFM32HG309F64 ARMv6-M core. Has support to configure tomu bootloader directly from application via
toboot_config
macro.
- HAL implementation targeted for Tomu USB board with EFM32HG309F64 ARMv6-M core. Has support to configure tomu bootloader directly from application via
XMC
xmc1100-hal
-xmc4-hal
-
GigaDevice
gd32vf103xx-hal
-- HAL for GD32VF103xx microcontrollers
gd32vf103-hal
-- (WIP) Hardware abstract layer (HAL) for the GD32VF103 RISC-V microcontroller
Architecture support crates
Crates tailored for general CPU architectures.
ARM
cortex-a
Low level access to Cortex-A processors (early state) -cortex-m
Low level access to Cortex-M processors -
RISC-V
riscv
Low level access to RISC-V processors -
MIPS
mips
Low level access to MIPS32 processors -
Board support crates
Crates tailored for specific boards.
1BitSquared
Adafruit
metro_m4
-pyportal
-trellis_m4
-feather-f405
-
Arduino
avr-hal
- Board support crate for several AVR-based boards including the Arduino Uno and the Arduino Leonardo
Nordic
dwm1001
- Decawave DWM1001-DEV -microbit
- micro:bit -
NXP
frdm-kw41z
- FRDM-KW41Z -
SeeedStudio
seedstudio-gd32v
- Board support crate for the GD32 RISC-V Dev Board- Contains runnable examples for this board
SiFive
Sipeed
longan-nano
- Board support package for the Longan Nano board- Contains runnable examples for this board
Sony
prussia
- SDK for the PlayStation 2.
STMicroelectronics
f3
Board Support Crate for the STM32F3DISCOVERY -nucleo-f042k6
- Nucleo-F042K6nucleo-f103rb
- Nucleo-F103RBnucleo-f401re
- Nucleo-F401REsolo-bsp
Board Support Crate for Solo, an open source security token (WIP) -stm32f407g-disc
Board Support Crate for the STM32F4DISCOVERY (WIP) -stm32f429i-disc
Board Support Crate for the STM32F429DISCOVERY (WIP) -
Texas Instruments
monotron
- A 1980s home-computer style application for the Texas Instruments Stellaris Launchpad. PS/2 keyboard input, text output on a bit-bashed 800x600 VGA signal. Uses menu, vga-framebuffer and pc-keyboard.stellaris-launchpad
- For the Texas Instruments Stellaris Launchpad and Tiva-C Launchpad
Special Purpose
betafpv-f3
- For the BetaFPV F3 drone flight controller
Component abstraction crates
The following crates provide HAL-like abstractions for subcomponents of embedded
devices which go beyond what is available in embedded-hal
:
accelerometer
- Generic accelerometer support, including traits and types for taking readings from 2 or 3-axis accelerometers and tracking device orientations -embedded-graphics
: 2D drawing library for any size display -radio
- Generic radio transceiver traits, mocks, and helpers -smart-leds
: Support for addressable LEDs including WS2812 and APA102usb-device
: Abstraction layer between USB peripheral crates & USB class crates -
Driver crates
Platform agnostic crates to interface external components. These crates use the embedded-hal
interface to support all the devices and systems that implement the embedded-hal
traits.
The list below contains drivers developed as part of the Weekly Driver initiative and that have achieved the "released" status (published on crates.io + documentation / short blog post).
- AD983x - SPI - AD9833/AD9837 waveform generators / DDS - Intro blog post -
- adafruit-alphanum4 - I2C - Driver for Adafruit 14-segment LED Alphanumeric Backpack based on the ht16k33 chip -
- ADS1x1x - I2C - 12/16-bit ADCs like ADS1013, ADS1015, ADS1115, etc. - Intro blog post -
- ADXL343 - I2C - 3-axis accelerometer -
- ADXL355 - SPI - 3-axis accelerometer - Intro blog post -
- AT86RF212 - SPI - Low power IEEE 802.15.4-2011 ISM RF Transceiver - Intro blog post -
- BlueNRG - SPI - driver for BlueNRG-MS Bluetooth module - Intro post
- BNO055 - I2C - Bosch Sensortec BNO055 9-axis IMU driver - Intro post
- DS1307 - I2C - Real-time clock driver - Intro blog post -
- EEPROM24x - I2C - 24x series serial EEPROM driver - Intro blog post -
- embedded-sdmmc - SPI - SD/MMC Card Driver with MS-DOS Partition and FAT16/FAT32 support - Intro post
- ENC28J60 - SPI - Ethernet controller - Intro blog post -
- HTS221 - I2C - Humidity and temperature sensor - Intro blog post -
- keypad - GPIO - Keypad matrix circuits - Intro post -
- KXCJ9 - I2C - KXCJ9/KXCJB 3-axis accelerometers - Intro blog post -
- L3GD20 - SPI - Gyroscope - Intro blog post -
- LSM303DLHC - I2C - Accelerometer + compass (magnetometer) - Intro blog post -
- MAX6955 - I2C - Driver for Alphanumeric LED display driver - Intro blog post -
- MCP3008 - SPI - 8 channel 10-bit ADC - Intro blog post -
- MCP3425 - I2C - 16-bit ADC - Intro blog post -
- MCP794xx - I2C - Real-time clock / calendar driver - Intro blog post -
- MMA7660FC - I2C - 3-axis accelerometer - Intro blog post
- OPT300x - I2C - Ambient light sensor family driver - Intro blog post -
- pwm-pca9685 - I2C - 16-channel, 12-bit PWM/Servo/LED controller - Intro blog post -
- rotary-encoder-hal - GPIO - A rotary encoder driver using
embedded-hal
- Intro blog post - - SGP30 - I2C - Gas sensor - Intro blog post -
- SH1106 - I2C - Monochrome OLED display controller - Intro post
- shared-bus - I2C - utility driver for sharing a bus between multiple devices - Intro post
- shift-register-driver - GPIO - Shift register - Intro blog post -
- Si4703 - I2C - FM radio turner (receiver) driver - Intro blog post -
- SSD1306 - I2C/SPI - OLED display controller - Intro blog post -
- Sx127x - SPI - Long Range Low Power Sub GHz (Gfsk, LoRa) RF Transceiver - Intro blog post -
- Sx128x - SPI - Long range, low power 2.4 GHz (Gfsk, Flrc, LoRa) RF Transceiver - Intro blog post -
- TMP006 - I2C - Contact-less infrared (IR) thermopile temperature sensor driver - Intro post
- TMP1x2 - I2C - TMP102 and TMP112x temperature sensor driver - Intro blog post
- TSL256X - I2C - Light Intensity Sensor - Intro blog post -
- VEML6030/VEML7700 - I2C - Ambient light sensors - Intro blog post -
- VEML6075 - I2C - UVA and UVB light sensor - Intro blog post -
- usbd-serial - USB CDC-ACM class (serial) implementation - github -
- usbd-hid - USB HID class implementation - github -
- usbd-hid-device - USB HID class implementation without
unsafe
- github - - usbd-midi - USB MIDI class implementation - github -
- usbd-webusb - USB webUSB class implementation - github -
- SHTCx - I2C - Temperature / humidity sensors - github -
- ST7789 - SPI - An embedded-graphics compatible driver for the popular lcd family from Sitronix used in the PineTime watch github
- DW1000 - SPI - Radio transceiver (IEEE 802.15.4 and position tracking) - Article -
NOTE You may be able to find even more driver crates by searching for the embedded-hal-driver
keyword on crates.io!
WIP
Work in progress drivers. Help the authors make these crates awesome!
- AFE4400 - SPI - Pulse oximeter
- APDS9960 - I2C - Proximity, ambient light, RGB and gesture sensor -
- AS5048A - SPI - AMS AS5048A Magnetic Rotary Encoder
- AXP209 - I2C - Power management unit
- BH1750 - I2C - ambient light sensor (lux meter)
- BME280 - A rust device driver for the Bosch BME280 temperature, humidity, and atmospheric pressure sensor and the Bosch BMP280 temperature and atmospheric pressure sensor.
- bme680 - I2C - Temperature / humidity / gas / pressure sensor -
- BMI160 - I2C / SPI - Inertial Measurement Unit -
- BMP280 - A platform agnostic driver to interface with the BMP280 pressure sensor
- CC1101 - SPI - Sub-1GHz RF Transceiver -
- CCS811 - I2C - Gas and VOC sensor driver for monitoring indoor air quality.
- DS3231 - I2C - real time clock
- DS3234 - SPI - Real time clock
- DS323x - I2C/SPI - Real-time clocks (RTC): DS3231, DS3232 and DS3234 -
- eink-waveshare - SPI - driver for E-Paper Modules from Waveshare
- embedded-morse - Output morse messages -
- embedded-nrf24l01 - SPI+GPIO - 2.4 GHz radio
- GridEYE - I2C - Rust driver for Grid-EYE / Panasonic AMG88(33) -
- HC-SR04 - DIO - Ultrasound sensor
- HD44780-driver - GPIO - LCD controller -
- HD44780 - Parallel port - LCD controller
- HM11 - USART - HM-11 bluetooth module AT configuration crate -
- HRS3300 - I2C - Heart rate sensor / monitor used in the PineTime smartwatch, for example. -
- HDC20xx - I2C - Temperature and humidity sensor compatible with HDC2080, HDC2021 and HDC2010. -
- hub75 - A driver for rgb led matrices with the hub75 interface -
- hzgrow-r502 - UART capacitive fingerprint reader -
- iAQ-Core - I2C - iAQ-Core-C/iAQ-Core-P Gas and VOC sensor driver for monitoring indoor air quality.
- ILI9341 - SPI - TFT LCD display
- INA260 - I2C - power monitor -
- ISL29125 - I2C - RGB Color Light Sensor with IR Blocking Filter -
- LM75 - I2C - Temperature sensor and thermal watchdog -
- LS010B7DH01 - SPI - Memory LCD
- LSM303C - A platform agnostic driver to interface with the LSM303C (accelerometer + compass)
- LSM9DS1 - I2C/SPI - 9-axis motion sensor module
- lvgl - no_std LittleVGL port -
- MAG3110 - I2C - Magnetometer
- MAX17048/9 - I2C - LiPo Fuel gauge, battery monitoring IC -
- MAX170xx - I2C - LiPo Fuel gauge, battery monitoring ICs compatible with MAX17043/4, MAX17048/9, MAX17058/9.
- MAX3010x - I2C - Pulse oximeter and heart-rate sensor. ATM Compatible with MAX30102. -
- MAX31855 - SPI - Thermocouple digital converter -
- MAX31865 - SPI - RTD to Digital converter -
- MAX44009 - I2C - Ambient light sensor -
- MAX7219 - SPI - LED display driver -
- MCP4725 - I2C - 12-bit DAC -
- MCP49xx - SPI - 8/10/12-bit DACs like MCP4921, MCP4922, MCP4801, etc. -
- MCP9808 - I2C - Temperature sensor -
- MFRC522 - SPI - RFID tag reader/writer
- midi-port - UART - MIDI input -
- motor-driver - Motor drivers: L298N, TB6612FNG, etc.
- MPU6050 - I2C - no_std driver for the MPU6050
- MPU9250 - no_std driver for the MPU9250 (and other MPU* devices) & onboard AK8963 (accelerometer + gyroscope + magnetometer IMU)
- NRF24L01 - SPI - 2.4 GHz wireless communication
- OneWire - 1wire - OneWire protocol implementation with drivers for devices such as DS18B20 -
- PCD8544 - SPI - 48x84 pixels matrix LCD controller
- PCD8544_rich - SPI - Rich driver for 48x84 pixels matrix LCD controller -
- PCF857x - I2C - I/O expanders: PCF8574, PCF8574A, PCF8575
- radio-at86rf212 - SPI - Sub GHz 802.15.4 radio transceiver
- RFM69 - SPI - ISM radio transceiver
- RN2xx3 - Serial - A driver for the RN2483 / RN2903 LoRaWAN modems by Microchip
- SCD30 - I2C - CO₂ sensor -
- SHT2x - I2C - temperature / humidity sensors
- SHT3x - I2C - Temperature / humidity sensors
- SI5351 - I2C - clock generator
- SI7021 - I2C - Humidity and temperature sensor
- spi-memory - SPI - A generic driver for various SPI Flash and EEPROM chips -
- SSD1322 - SPI - Graphical OLED display controller -
- SSD1351 - SPI - 16bit colour OLED display driver -
- SSD1675 - SPI - Tri-color ePaper display controller -
- st7032i - I2C - Dot Matrix LCD Controller driver (Sitronix ST7032i or similar). -
- ST7735-lcd - SPI - An embedded-graphics compatible driver for the popular lcd family from Sitronix
- ST7920 - SPI - LCD displays using the ST7920 controller
- stm32-eth - MCU - Ethernet
- SX1278 - SPI - Long range (LoRa) transceiver
- SX1509 - I2C - IO Expander / Keypad driver
- TCS3472 - I2C - RGB color light sensor -
- TPA2016D2 - I2C - A driver for interfacing with the Texas Instruments TPA2016D2 Class-D amplifier -
- VEML6040 - I2C - RGBW color light sensor -
- VEML6070 - I2C - UVA light sensor -
- vesc-comm - A driver for communicating with VESC-compatible electronic speed controllers
- VL53L0X - A platform agnostic driver to interface with the vl53l0x (time-of-flight sensor)
- w5500 - SPI - Ethernet Module with hardwired protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE -
- xCA9548A - I2C - I2C switches/multiplexers: TCA9548A, PCA9548A -
no-std crates
#![no_std]
crates designed to run on resource constrained devices.
- atomic: Generic Atomic wrapper type.
- bbqueue: A SPSC, statically allocatable queue based on BipBuffers suitable for DMA transfers -
- bitmatch: A crate that allows you to match, bind, and pack the individual bits of integers. -
- biquad: A library for creating second order IIR filters for signal processing based on Biquads, where both a Direct Form 1 (DF1) and Direct Form 2 Transposed (DF2T) implementation is available.
- bit_field: manipulating bitfields and bitarrays -
- bluetooth-hci: device-independent Bluetooth Host-Controller Interface implementation.
- bounded-registers A high-assurance memory-mapped register code generation and interaction library.
bounded-registers
provides a Tock-like API for MMIO registers with the addition of type-based bounds checking. - - combine: parser combinator library -
- console-traits: Describes a basic text console. Used by menu and implemented by vga-framebuffer.
cmim
, or Cortex-M Interrupt Move: A crate for Cortex-M devices to move data to interrupt context, without needing a critical section to access the data within an interrupt, and to remove the need for the "mutex dance" -- dcmimu: An algorithm for fusing low-cost triaxial MEMS gyroscope and accelerometer measurements
- debouncr: A simple no-std input debouncer to detect rising/falling edges with minimal RAM requirements.
- embedded-websocket: A lightweight server and client websocket library for embedded systems.
- endian_codec: (En/De)code rust types as packed bytes with specific order (endian). Supports derive. -
- gcode: A gcode parser for no-std applications -
- heapless: provides
Vec
,String
,LinearMap
,RingBuffer
backed by fixed-size buffers - - ieee802154: Partial implementation of the IEEE 802.15.4 standard -
- infrared: infrared remote control library for embedded rust -
- intrusive-collections: intrusive (non-allocating) singly/doubly linked lists and red-black trees -
- irq: utilities for writing interrupt handlers (allows moving data into interrupts, and sharing data between them) -
- managed: provides
ManagedSlice
,ManagedMap
backed by either their std counterparts or fixed-size buffers for#![no_std]
. - - menu: A basic command-line interface library. Has nested menus and basic help functionality.
- microfft: Embedded-friendly (
no_std
, no-alloc
) fast fourier transforms - - micromath: Embedded Rust math library featuring fast, safe floating point approximations for common arithmetic operations, 2D and 3D vector types, and statistical analysis -
- nalgebra: general-purpose and low-dimensional linear algebra library -
- nom: parser combinator framework -
- null-terminated: generic null-terminated arrays -
- num-format: Crate for producing string representations of numbers, formatted according to international standards, e.g. "1,000,000" for US English -
panic-persist
: A panic handler crate inspired bypanic-ramdump
that logs panic messages to a region of RAM defined by the user, allowing for discovery of panic messages post-mortem using normal program control flow. -- pc-keyboard: A PS/2 keyboard protocol driver. Transport (bit-banging or SPI) agnostic, but can convert Set 2 Scancodes into Unicode.
- qei : A qei wrapper that allows you to extend your qei timers from a 16 bit integer to a 64 bit integer. -
- qemu-exit: Quit a running QEMU session with user-defined exit code. Useful for unit or integration tests using QEMU. -
- register-rs: Unified interface for MMIO and CPU registers. Provides type-safe bitfield manipulation.
register-rs
is Tock registers with added support for CPU register definitions using the same API as for the MMIO registers. This enables homogeneous interfaces to registers of all kinds. - - scroll: extensible and endian-aware Read/Write traits for generic containers -
- smoltcp: a small TCP/IP stack that runs without
alloc
. - tinybmp: No-std, no-alloc BMP parser for embedded systems. Introductory blog post -
- vga-framebuffer: A VGA signal generator and font renderer for VGA-less microcontrollers. Used by Monotron to generate 48 by 36 character display using 3 SPI peripherals and a timer.
- wyhash: A fast, simple and portable hashing algorithm and random number generator. -
WIP
Work in progress crates. Help the authors make these crates awesome!
- light-cli: a lightweight heapless cli interface
- OxCC: A port of Open Source Car Control written in Rust
- Rubble: A pure-Rust embedded BLE stack
Rust forks
AVR
- AVR Rust Fork of Rust with AVR support.
Firmware projects
- anne-key: Alternate keyboard firmware for the Obins ANNE Pro
- e.ziclean cube vacuum cleaner: Experiments with open firmware for e.ziclean cube vacuum cleaner
License
This list is licensed under
- CC0 1.0 Universal License (LICENSE-CC0 or https://creativecommons.org/publicdomain/zero/1.0/legalcode)
Code of Conduct
Contribution to this crate is organized under the terms of the Rust Code of Conduct, the maintainer of this crate, the Resources team, promises to intervene to uphold that code of conduct.