mirror of
https://github.com/pikvm/pikvm
synced 2024-11-08 19:10:24 +00:00
83 lines
4.8 KiB
Markdown
83 lines
4.8 KiB
Markdown
# ezCoo managed multiport KVM switch
|
|
|
|
The ezCoo managed switch can be controlled by Pi-KVM to allow it to connect to multiple hosts. A typical scenario is a single Pi-KVM device which can control and switch between multiple hosts or servers using the ezCoo switch. UI elements can be added to the [GPIO dropdown](gpio.md) to allow switching between hosts from the Pi-KVM webpage. The instructions here were tested with the [ezCoo SW41HA HDMI 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb20-kvm-4-port-usbsupport-4k60hz-444-and-hdr-audio-breakout). The following was testing on a Raspberry Pi 4 but should also work on the Pi 2 and 3. This document was informed by multiple users on the [Pi-KVM Discord](https://discord.gg/bpmXfz5) and the author appreciates their efforts.
|
|
|
|
:exclamation: While most images of the switch do not show the sides, there is a Micro USB port on the side of the ezCoo switch. This is the management port, which is controlled via COM port on the ezCoo KVM. When plugged into the Raspberry Pi, it appears as `/dev/ttyUSB0`.
|
|
|
|
:exclamation: Audio was not tested, it is assumed to be non-functional.
|
|
|
|
## Connections
|
|
From a high level, the ezCoo switch uses standard connections to the host machines (USB-A to USB-B and HDMI). The Raspberry Pi OTG connector (the one coming from the USB-C port on a Pi 4 via the custom splitter cable or device) should be connected to the USB 3 port on the ezCoo switch. There is an additional USB cable connected to the managed port on the switch.
|
|
|
|
1. Connect the USB-A cable from the Raspberry Pi OTG port to ezCoo switch USB 3 port on the front of the switch. **Note**: If this cable is connected to the keyboard port of the ezCoo switch the mouse will not be present.
|
|
2. Connect the HDMI out from the ezCoo switch to the Raspberry Pi CSI-2 to HMDI input. Other users have reported HMDI encoder USB dongles as working.
|
|
3. Connect a USB-A to Micro USB cable from the Raspberry Pi to the management port on the side of the ezCoo switch.
|
|
4. Connect host USB and HDMI cables from the ezCoo switch to the machines to be managed per the switch instructions.
|
|
5. At this point the KVM switch should be present as a device on the Pi-KVM. SSH into Pi-KVM and ensure a device like `/dev/ttyUSB0` is present. The following instructions assume this is the KVM switch.
|
|
|
|
:exclamation: There is a limitation in the underlying Pi-KVM software related to plugging video cables from a host which is already powered and connected to a monitor to a Raspberry Pi CSI2-HDMI encoder. These limitations apply equally when using the ezCoo KVM switch. If video is not present in Pi-KVM, try keeping all host machines off and connecting them directly to the ezCoo switch before powering the hosts on.
|
|
|
|
## Adding UI elements to control the KVM switch
|
|
The UI can be updated to add buttons to switch between KVM inputs and indicators for which input is currently selected. The instructions below will make these available in the Pi-KVM UI after clicking the "GPIO" menu button in the KVM view.
|
|
|
|
1. SSH into Pi-KVM
|
|
2. Enable read-write mode on the sd card via `rw`
|
|
3. Edit the `/etc/kvmd/override.yaml` file and include the following. Note the assumption that the KVM switch is present on `/dev/ttyUSB0`:
|
|
```yaml
|
|
kvmd:
|
|
gpio:
|
|
drivers:
|
|
ez:
|
|
type: ezcoo
|
|
device: /dev/ttyUSB0
|
|
scheme:
|
|
ch0_led:
|
|
driver: ez
|
|
pin: 0
|
|
mode: input
|
|
ch1_led:
|
|
driver: ez
|
|
pin: 1
|
|
mode: input
|
|
ch2_led:
|
|
driver: ez
|
|
pin: 2
|
|
mode: input
|
|
ch3_led:
|
|
driver: ez
|
|
pin: 3
|
|
mode: input
|
|
ch0_button:
|
|
driver: ez
|
|
pin: 0
|
|
mode: output
|
|
switch: false
|
|
ch1_button:
|
|
driver: ez
|
|
pin: 1
|
|
mode: output
|
|
switch: false
|
|
ch2_button:
|
|
driver: ez
|
|
pin: 2
|
|
mode: output
|
|
switch: false
|
|
ch3_button:
|
|
driver: ez
|
|
pin: 3
|
|
mode: output
|
|
switch: false
|
|
view:
|
|
table:
|
|
- ["#Input 1", ch0_led, ch0_button]
|
|
- ["#Input 2", ch1_led, ch1_button]
|
|
- ["#Input 3", ch2_led, ch2_button]
|
|
- ["#Input 4", ch3_led, ch3_button]
|
|
```
|
|
4. Return to read-only mode for the sd card via `ro`
|
|
5. Restart the kvmd service: `systemctl restart kvmd`
|
|
|
|
## Switching between hosts in the UI
|
|
|
|
To switch between hosts, enter the KVM UI and click the "GPIO" menu. You should see 4 inputs, one of which will have a green circle indicating it is currently selected. Click the other inputs to change the selected host.
|