mirror of
https://github.com/pikvm/pikvm
synced 2024-11-08 19:10:24 +00:00
1.8 KiB
1.8 KiB
3D printable case for PiKVM v3.2 HAT
When printing the case, you can choose the following options:
- The presence or absence of an OLED screen (used to display the IP address and other information).
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
Also take a look at the PCI bracket for ATX adapter board.
Buy options
- Small 5v fan strongly recommended to avoid overheating in the case.
- I2C OLED screen.
Building
Parts
The front part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The front part of the case WITHOUT a hole for the OLED |
 |
The front part of the case with a hole for installing the OLED |
The back part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The back part of the case WITHOUT AUM holes |
 |
The back part of the case for installing the AUM |
Spacers
| Type | Description |
|---|---|
 |
6.2mm spacer, required TWO pieces |
 |
2mm spacer required ONE without AUM or TWO for AUM |
 |
1mm spacer required ONE for AUM only |
 |
Low spacer required ONE |