* Link back to "original"/default EDID in the kvmd repo for ease/reference purposes
4.0 KiB
EDID
EDID is information about the video modes supported by the video capture device. In the case of Pi-KVM, this is an HDMI CSI bridge. Usually, you don't need to change this, since the default configuration is quite flexible, but sometimes, for example for strange UEFIs/BIOSes, this may be necessary (the story).
The EDID is stored on the Pi-KVM in the file /etc/kvmd/tc358743-edid.hex
. If you write new data there, it will be applied on the Pi-KVM reboot.
You can also apply the new EDID without rebooting to make sure it works:
- Switch filesystem to RW-mode:
rw
. - Create file with EDID
/root/edid.hex
(examples of file contents are shown below). - Apply EDID using the command
v4l2-ctl --device=/dev/kvmd-video --set-edid=file=/root/edid.hex --fix-edid-checksums
. - DO NOT REBOOT the Pi-KVM. Just your PC. Check the UEFI/BIOS.
- If everything works, you can write the same data to
/etc/kvmd/tc358743-edid.hex
. - Switch filesystem to RO-mode:
ro
.
The examples below are tested on these devices, but they are also suitable for others. To edit or create EDID you can use AW EDID Editor.
1280x1024 as preferred resolution, Gigabyte GA-H77-DS3H
00 FF FF FF FF FF FF 00 52 62 88 88 00 88 88 88 1C 15 01 03 80 00 00 78 0A EE 91 A3 54 4C 99 26 0F 50 54 25 40 00 01 00 01 00 01 00 01 00 01 00 01 00 01 01 01 01 D5 1B 00 50 50 00 19 40 08 20 B8 00 80 00 10 00 00 1E EC 2C 80 A0 70 38 1A 40 30 20 35 00 40 44 21 00 00 1E 00 00 00 FC 00 50 49 2D 4B 56 4D 20 56 69 64 65 6F 0A 00 00 00 FD 00 32 3D 0F 2E 0F 00 00 00 00 00 00 00 00 01 4D 02 03 04 00 DE 0D 20 A0 30 58 12 20 30 20 34 00 F0 B4 00 00 00 18 E0 15 00 A0 40 00 16 30 30 20 34 00 00 00 00 00 00 18 B4 14 00 A0 50 D0 11 20 30 20 35 00 80 D8 10 00 00 18 AB 22 A0 A0 50 84 1A 30 30 20 36 00 B0 0E 11 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45
1920x1080 as preferred resolution, Gigabyte GA-H77-DS3H
00 FF FF FF FF FF FF 00 52 62 88 88 00 88 88 88 1C 15 01 03 80 00 00 78 0A EE 91 A3 54 4C 99 26 0F 50 54 25 40 00 01 00 01 00 01 00 01 00 01 00 01 00 01 01 01 01 D3 2C 80 A0 70 38 1A 40 30 20 35 00 40 44 21 00 00 1E 7E 1D 00 A0 50 00 19 40 30 20 37 00 80 00 10 00 00 1E 00 00 00 FC 00 50 49 2D 4B 56 4D 20 56 69 64 65 6F 0A 00 00 00 FD 00 32 3D 0F 2E 0F 00 00 00 00 00 00 00 00 01 C4 02 03 04 00 DE 0D 20 A0 30 58 12 20 30 20 34 00 F0 B4 00 00 00 18 E0 15 00 A0 40 00 16 30 30 20 34 00 00 00 00 00 00 18 B4 14 00 A0 50 D0 11 20 30 20 35 00 80 D8 10 00 00 18 AB 22 A0 A0 50 84 1A 30 30 20 36 00 B0 0E 11 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45
1920x1080 as preferred resolution, Intel NUC
00 FF FF FF FF FF FF 00 52 62 88 88 00 88 88 88 1C 15 01 03 80 00 00 78 0A EE 91 A3 54 4C 99 26 0F 50 54 25 40 00 01 00 01 00 01 00 01 00 01 00 01 00 01 01 01 01 D3 2C 80 A0 70 38 1A 40 30 20 35 00 40 44 21 00 00 1E 7E 1D 00 A0 50 00 19 40 30 20 37 00 80 00 10 00 00 1E 00 00 00 FC 00 50 49 2D 4B 56 4D 20 56 69 64 65 6F 0A 00 00 00 FD 00 32 3D 0F 2E 0F 00 00 00 00 00 00 00 00 01 C4 02 03 04 00 DE 0D 20 A0 30 58 12 20 30 20 34 00 F0 B4 00 00 00 18 E0 15 00 A0 40 00 16 30 30 20 34 00 00 00 00 00 00 18 B4 14 00 A0 50 D0 11 20 30 20 35 00 80 D8 10 00 00 18 AB 22 A0 A0 50 84 1A 30 30 20 36 00 B0 0E 11 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45
Default EDID
If for some reason you need to go back to the default EDID (changing attached device etc), you can find it locally on the Pi at /usr/share/kvmd/configs.default/kvmd/tc358743-edid.hex
(cp /usr/share/kvmd/configs.default/kvmd/tc358743-edid.hex /etc/kvmd/tc358743-edid.hex
) or in the kvmd repo.