mirror of
https://github.com/pikvm/pikvm
synced 2024-11-18 09:25:43 +00:00
34 lines
1.7 KiB
Markdown
34 lines
1.7 KiB
Markdown
# Pi-KVM v3.2 Plastic Case for 3D printing
|
|
When printing the case, you can choose the following options:
|
|
- The presence or absence of an OLED screen (used to display the IP address and other information).
|
|
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
|
|
|
|
## Buy options
|
|
* [Small 5v fan](https://www.pishop.us/product/5v-cooling-fan) **strongly recommended** to avoid overheating in the case.
|
|
* [I2C OLED screen](https://www.amazon.com/Pieces-Display-Module-SSD1306-Screen/dp/B08TLXYKS6).
|
|
|
|
## Building
|
|
See [this](https://www.youtube.com/watch?v=-SRL92VJ870) video.
|
|
|
|
# The front part
|
|
**Choose ONE of them.**
|
|
| Variant | Description |
|
|
|---------|-------------|
|
|
| <img src="case_a_no_oled.png" width=200 /> | [The front part](case_a_no_oled.stl) of the case **WITHOUT a hole** for the OLED |
|
|
| <img src="case_a.png" width=200 /> | [The front part](case_a.stl) of the case with a hole **for installing the OLED** |
|
|
|
|
# The back part
|
|
**Choose ONE of them.**
|
|
| Variant | Description |
|
|
|---------|-------------|
|
|
| <img src="case_b_no_aum.png" width=200 /> | [The back part](case_b_no_aum.stl) of the case **WITHOUT AUM holes** |
|
|
| <img src="case_b.png" width=200 /> | [The back part](case_b.stl) of the case **for installing the AUM** |
|
|
|
|
# Spacers
|
|
| Type | Description |
|
|
|------|-------------|
|
|
| <img src="spacer_6.2mm.png" width=200 /> | [6.2mm spacer](spacer_6.2mm.stl), required **TWO** pieces |
|
|
| <img src="spacer_2mm.png" width=200 /> | [2mm spacer](spacer_2mm.stl) required **TWO for AUM** or **ONE without AUM** |
|
|
| <img src="spacer_1mm.png" width=200 /> | [1mm spacer](spacer_1mm.stl) required **ONE for AUM only** |
|
|
| <img src="low_spacer.png" width=200 /> | [Low spacer](low_spacer.stl) required **ONE** |
|