mirror of
https://github.com/pikvm/pikvm
synced 2024-11-05 00:00:28 +00:00
30 lines
1.3 KiB
Markdown
30 lines
1.3 KiB
Markdown
# Flashing the Arduino HID
|
|
This operation can be done using your RPi. Here the common steps:
|
|
|
|
1. Disconnect the RESET wire from the Arduino board.
|
|
2. Connect the Arduino and RPi with a suitable USB cable.
|
|
3. Log in to the Raspberry Pi using SSH (`ssh root@<addr>` with password `root` by default) or using keyboard and monitor. The Raspberry Pi obtains the network address over DHCP.
|
|
4. Upload the firmware (USB keyboard & mouse is used by default, on this step [you can choose PS/2 keyboard](arduino_hid.md#ps2-keyboard)):
|
|
```shell
|
|
[root@pikvm ~]# rw
|
|
[root@pikvm ~]# systemctl stop kvmd
|
|
[root@pikvm ~]# cp -r /usr/share/kvmd/hid ~
|
|
[root@pikvm ~]# cd ~/hid
|
|
[root@pikvm hid]# make
|
|
[root@pikvm hid]# make install
|
|
[root@pikvm hid]# reboot
|
|
```
|
|
5. Connect the RESET wire, disconnect the USB cable, and reboot the RPi.
|
|
|
|
On `make install` you may encounter the following error:
|
|
```
|
|
/root/.platformio/packages/tool-avrdude/avrdude: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory
|
|
```
|
|
Create a symlink for this library:
|
|
```bash
|
|
[root@pikvm ~]# ln -s /usr/lib/libtinfo.so.6 /usr/lib/libtinfo.so.5
|
|
```
|
|
And run `make install` again.
|
|
|
|
If you have any problems or questions, contact us using Discord: https://discord.gg/bpmXfz5
|