Pi-KVM OS is based on Arch Linux ARM and contains all required packages and config for work. To build OS you will need any Linux machine with fresh Docker (we recommand >= 1:19).
1. Checkout build toolchain:
```shell
$ git clone https://github.com/pikvm/os
$ cd os
```
2. Select the target hardware configuration (platform). If you are using an analog VGA video capture device, choose `v0-vga`. If you want to use HDMI with Auvidea B101, choose `v0-hdmi`. Other options are for specialized Pi-KVM boards (WIP).
3. Create config file `config.mk` for the target system. You must specify the path to SD card on your local computer (this will be used to format and install the system) and version of your Raspberry Pi and platform. You can change other parameters as you wish:
```Makefile
$ cat config.mk
BOARD = rpi3 # rpi3 for any Raspberry Pi 3, rpi2 for version 2.
PLATFORM = v0-vga # Hardware configuration.
HOSTNAME = pikvm # Target hostname
LOCALE = en_US # ru_RU, etc. UTF-8 only
TIMEZONE = Europe/Moscow # See /usr/share/zoneinfo
ROOT_PASSWD ?= root # For SSH root user
WEBUI_ADMIN_PASSWD ?= admin # Web UI credentials: user=admin, password=<this>
4. Build OS. It may take about an hour depends on your Internet connection:
```shell
$ make os
```
5. Put SD card into card reader and install OS:
```shell
$ make install
```
6. After installation remove the SD card and insert it into Raspberry Pi. Turn on the power. Raspberry Pi will try to get the address using DHCP in your LAN. Congratulations! Your Pi-KVM will be available via SSH (`ssh root@<addr>`) and HTTPS (try to open using browser `https://<addr`). For HTTPS used a self-signed certificate by default.
7. If you cannot find the device address, try using the following command:
заменяешь CARD, в STAGES убираешь rootssh, потом билдишь
make v1-vga-rpi3
make install
всё
пользователь в морду admin, пароль admin
mdevaevВчера в 17:36
если есть время - попробуй пересобрать квм
я там всякой мелочи прикольной допилил
только надо в os сделать make clean-all
и в самом репе сделать git pull
много перепилил
чекни урл /extras/webterm/gotty/
там консоль
1.
make clean-all
git checkout .
git pull
2.
nano Makefile
CARD ?= /dev/sdb
CARD_BOOT ?= $(CARD)1
CARD_ROOT ?= $(CARD)2
3.
make v1-vga-rpi3
make install
make clean-all
git pull --rebase
make v1-vga-rpi3
make install
make v1-vga-rpi3 install
```
Everything will be done on the Pi3 and Pi0 automatically with the video input defaulting to s-video.
If you would like to manage multiple servers with one IPMI system, please see the [Managing multiple servers](#managing-multiple-servers) section below.