Very simple take at ncplane_puttext(), a new function for linebroken text. Also some very basic unit tests. I doubt this works very well yet, but it handles the simplest cases #682. Added nclog(), internal function for logging. #520
Whip the ol' llama's ass (fix ncvisual rotation)
* notcurses: flush cursor change requests #673
* rotator: verify ncplane_rgba and ncblit_rgba
* ncblit: rename, accept ncblitter_e #674
* rotator: render from rgba
* rotator: get to rotation
* rotator: add a pi/4 turn at the end
* normal: reuse incoming plane for rendering #672
* rotator poc: rotate a fullplane gradient #672
* normal demo: place visual correctly
* rotator: verify ncplane_rgba and ncblit_rgba
* ncblit: rename, accept ncblitter_e #674
* rotator: render from rgba
* rotator: add a pi/4 turn at the end
* normal: reuse incoming plane for rendering #672
* rotator poc: rotate a fullplane gradient #672
* normal demo: place visual correctly
* rotator poc: throw some red into gradient
* rotator poc: done #662
* oiio: ncvisual_resize() needs set ibuf pointer #662
* normal: only need erase at top of loop
* visual poc: shorter delay
* normal demo: center rendered visual
* comment ncvisual_resize() call
* ncvisual_rotate: call ncvisual_details_seed()
* ffmpeg ncvisual: fix rotation #662
If we're in ASCII mode, no blitter except for NCBLIT_1x1 is going to
work. Whenever NCBLIT_DEFAULT is provided, select NCBLIT_1x1 if we're
in ASCII mode. Add NCVISUAL_OPTIONS_MAYDEGRADE and
NCPLOT_OPTIONS_MAYDEGRADE. Both serve to allow smooth degradation when a
blitter other than NCBLIT_DEFAULT has been provided. Closes#637.
Make calc_gradient_cell() static inline so our templated ncppplot
implementation can use it (ugh). When using NCBLIT_1x1 for plots in
ASCII mode, use space rather than full block, and invert colors.
Use NCBLIT_DEFAULT in the demo for the FPS plot.
This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals:
Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to:
decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc.
normalize the various ways of constructing an ncvisual -- file, memory, plane, etc.
Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine)
I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed.
There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render().
This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding.
The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk.
Closes#638, #562, and #622.
Replace the singly-linked z-axis with a doubly-linked list,
and reimplement all z-axis moves as O(1) functions.
Eliminate ncplane_move_{above/below}_unsafe(), as there are no
longer unsafe moves.
Unify ffmpeg/oiio/null implementations, where possible. This effectively
required placing all three in the same file, which meant they're all now
C++. Update FFmpeg implemenation to be C++-usable. Implement
ncvisual_rotate_cw() and ncvisual_rotate_ccw() #515. Move most of tetris
over to Visual from Plane #558. Add bgra_to_rgba(), necessary for
creating ncvisual from BGRA memory. Implement ncvisual_from_rgba()
and ncvisual_from_bgra() #557. Add unit tests on ncvisual rotation.
* fedora: dep on OpenImageIO, and use it
* fedora: dep on libqrcodegen-devel
* fedora: BuildRequires OpenEXR-devel
* tight check on USE_MULTIMEDIA
* CMake: enable notcurses-view for ffmpeg OR oiio
* notcurses-view: don't reach into libav
* oiio: ncvisual_render() #453
* oiio: need our own properly-offset ncvisual_plane()
* `visual` poc: accept optional command line argument
* oiio: work for 3-channel images #453
* oiio: destroy ncvisual's plane if we own it #453
* notcurses_visual.3: s/FFmpeg/multimedia/g
* ncplane_at_* and ncplane_at_cursor_*
We had notcurses_at_yx() expanding into three distinct parts of
the cell structure, and ncplane_at_yx() / ncplane_at_cursor()
writing directly to a cell. It was annoying to remember which
was which. The latter two now have a signature matching
notcurses_at_yx(), while the old functionality has been moved
to ncplane_at_yx_cell() and ncplane_at_cursor_yx(). #476
* packaging: s/libtinfo/Terminfo/g
* rust: add stddim_yx()
* rust: check for valid init in unit tests
* rust: serialize up tests
* constify notcurses_term_dim_yx()
* rust: add dim wrappers
* remove notcurses_resize() from public API #367
* call notcurses_resize() from notcurses_refresh() #367
Resolves#410. notcurses_at_yx() accepted a cell*, but the
gcluster of this cell was always set to 0. The EGC is instead
a heap-allocated copy, returned as the primary return value.
This is due to the absence of an egcpool to bind against.
Existing callers can be converted thus:
* instead of passing cell 'c', pass &(c)->attrword, &(c)->channels
* either initialize 'c' with CELL_TRIVIAL_INITIALIZER, or set its
gcluster field to 0 following the call
I've updated all calls from tests/demos, updated the docs, and
updated the C++ and Python wrappers.
Add ncplane_bound(3). This allows a new plane N to be created in the
*bound* state relative to another ncplane B. If B moves, N moves the
same amount. If N is moved, the coordinates are taken relative to B
as opposed to the standard plane. If B is destroyed, N is destroyed.
Each plane can have many planes bound to it, but can only be bound to
a single plane. Add ncplane_reparent(3). This allows a plane to be
detached from any plane to which it is bound, and optionally rebound
to a new plane. The standard plane cannot be reparented.
Documentation and unit tests have been added for both.
ncvisual_render() now returns the number of cells emitted
rather than just 0/-1. -1 is still returned on failure.
Rather than 0 for length meaning "all possible length", it
now means 0, and -1 means "all possible length". All demos,
tests, and PoCs have been updated. #422
ncplane_mergedown() is similar to the "Merge down" operation
in the GIMP. It writes to the destination plane the result
of rendering the source and destination frames per se.
Add four new fields to notcurses_options: margin_{tblr}, which requests margins to the top, right, bottom, and left. Render only within those margins, leaving the screen otherwise untouched (well, cleared if using the alternate screen). #293
Accept -J as a parameter requiring an option to notcurses-demo(1).
Update the man page and usage message to reflect this. Open the
specified file for binary writing with truncation at option parsing
time; fail out if we can't open it. At the end of the demo, write
the results out as JSON, using full precision for all values #387.
* CMake: add USE_PANDOC, USE_DOXYGEN options #101
* README: mention rust
* start integrating rust into build #101
* CMake: add USE_NETWORK option for cargo
* Debian: build-dep on doxygen
* rust: colloquy checks in Cargo.lock
* extract NCKEY defines into their own include
* colloquy: use clap to parse CLI args
* CMake: unify option namespace
* Python: update include path
* Rust: fix up --frozen workings for -DUSE_NETWORK=off
* CMake: abstract out colloquy a little
* Sync direct.hh to the New Way
Get rid of annoying empty line in notcurses-view (and ncvisuals at offsets in general)
Implement most of the Selector widget. Need to add styling and scrolling still. #166
Reenable ubuntu focal build
Subtitles! We decode them, and display them in notcurses-view. If ncvisual_simple_streamer() is provided an extra ncplane, it will use it to display subtitles. #95
We now build Python by default, as things are working much better.
ncplane_set_base() now takes channel, attrword, and EGC, so you can usually avoid having to set up and release a cell. ncplane_set_base_cell() takes over duty from ncplane_set_base() for ease of conversion.
notcurses-demo and notcurses-view now both accept a 0 for delay multiplier, meaning 'go as fast as you possibly can'. Very small multipliers (e.g. 0.00001) no longer cause floating point exceptions.
fading routines no longer cause floating point exceptions on very small timescales.
Introduce the new type 'ncdirect', a stripped-down 'notcurses'
suitable for inline modification of regular output. Used the new
type because otherwise there were going to be if(directmode) checks
everywhere. Direct mode encompasses only colorizing and styling.
Add new man page notcurses_directmode(3). Add new section to README.
Add new PoC using direct mode RGB. Update demo table summary to use
direct mode.
As it turns out, we can't portably load the initial terminal contents
(there are some hacks of various EXTREME nature, but none of them are
worth it for the rather limited benefit). The O(1)-time damage
inference requires knowledge of what was previously present to
inibit unnecessary draws. We would then need some special cell value
indicating "not yet written to" to distinguish a purposeful null
cell from an initial cell. Again, we could do this, but for what value?
Finally, the idea of clearing new area on SIGWINCH was always flawed,
as we can't do that from a signal handler.
With the advent of direct mode #77, the reason for this largely goes
away in any case.
* palette_set: update pal256 damage map #230
* drone: use newest builders
* palette: send oc on exit for color reset #285
* palette_new: copy existing palette in #230
* Python: use checkRGB everywhere
* more palette unit testing
* add ncplane_set_*_palindex()
* render fg palindex #230
* palette index color is out of 1000
* jungle demo works #253
* sync up some docs #244
* sync README and man page
* notcurses_output() man page work
* pull attr/channels from output functions #244
* witherworm: clean up explicit moves #244
* still more man page work
* notcurses_lines, last of the man pages i think
* panelreel man page #244
* debian: ruby-ronn->pandoc
* debian: full multiarch compliance
* debian: symbols file
* pandoc: fix syntax for lexgrog
* fm6.mkv: strip audio
* pandoc: fix up apropos man syntax #249
* ncurses_lines man page
* uniblock-demo: reset background to black
* warning about quantization
* some luigi love
* update cell documentation
* add unit test for move of stdplane
* MoveToLowerRight unit test
* ncplane_move_yx(): error to move stdscr
* better box permutations test
* luigi in megaman2 world
* stats: don't print 'em if we haven't got 'em
