You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
notcurses/doc/man/man3/notcurses_visual.3.md

194 lines
8.2 KiB
Markdown

% notcurses_visual(3)
% nick black <nickblack@linux.com>
% v1.6.17
# NAME
notcurses_visual - notcurses multimedia
# SYNOPSIS
**#include <notcurses/notcurses.h>**
```c
typedef enum {
NCSCALE_NONE,
NCSCALE_SCALE,
NCSCALE_STRETCH,
} ncscale_e;
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
typedef enum {
NCBLIT_DEFAULT, // let the ncvisual pick
NCBLIT_1x1, // full block █
NCBLIT_2x1, // upper half + 1x1 ▀█
NCBLIT_1x1x4, // shaded full blocks ▓▒░█
NCBLIT_2x2, // quadrants + 2x1 ▗▐ ▖▀▟▌▙█
NCBLIT_4x1, // four vertical levels █▆▄▂
NCBLIT_BRAILLE, // 4 rows, 2 cols (braille) ⡀⡄⡆⡇⢀⣀⣄⣆⣇⢠⣠⣤⣦⣧⢰⣰⣴⣶⣷⢸⣸⣼⣾⣿
NCBLIT_8x1, // eight vertical levels █▇▆▅▄▃▂▁
NCBLIT_SIXEL, // 6 rows, 1 col (RGB), spotty support among terminals
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
} ncblitter_e;
#define NCVISUAL_OPTION_NODEGRADE 0x0001
#define NCVISUAL_OPTION_BLEND 0x0002
struct ncvisual_options {
struct ncplane* n;
ncscale_e scaling;
int y, x;
int begy, begx; // origin of rendered section
int leny, lenx; // size of rendered section
ncblitter_e blitter; // glyph set to use (maps input to output cells)
uint64_t flags; // bitmask over NCVISUAL_OPTION_*
};
typedef int (*streamcb)(struct notcurses*, struct ncvisual*, void*);
```
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**bool notcurses_canopen_images(const struct notcurses* nc);**
**bool notcurses_canopen_videos(const struct notcurses* nc);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**bool notcurses_cansixel(const struct notcurses* nc);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**struct ncvisual* ncvisual_from_file(const char* file, nc_err_e* err);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**struct ncvisual* ncvisual_from_rgba(const void* rgba, int rows, int rowstride, int cols);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**struct ncvisual* ncvisual_from_bgra(const void* bgra, int rows, int rowstride, int cols);**
**struct ncvisual* ncvisual_from_plane(struct ncplane* n, ncblitter_e blit, int begy, int begx, int leny, int lenx);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**int ncvisual_geom(const struct notcurses* nc, const struct ncvisual* n, const struct ncvisual_options* vopts, int* y, int* x, int* toy, int* tox);**
**void ncvisual_destroy(struct ncvisual* ncv);**
**nc_err_e ncvisual_decode(struct ncvisual* nc);**
**struct ncplane* ncvisual_render(struct notcurses* nc, struct ncvisual* ncv, const struct ncvisual_options* vopts);**
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**int ncvisual_simple_streamer(struct ncplane* n, struct ncvisual* ncv, const struct timespec* disptime, void* curry);**
**int ncvisual_stream(struct notcurses* nc, struct ncvisual* ncv, nc_err_e* err, float timescale, streamcb streamer, const struct ncvisual_options* vopts, void* curry);**
**int ncvisual_rotate(struct ncvisual* n, double rads);**
**int ncvisual_resize(struct ncvisual* n, int rows, int cols);**
**int ncvisual_polyfill_yx(struct ncvisual* n, int y, int x, uint32_t rgba);**
**int ncvisual_at_yx(const struct ncvisual* n, int y, int x, uint32_t* pixel);**
4 years ago
**int ncvisual_set_yx(const struct ncvisual* n, int y, int x, uint32_t pixel);**
**char* ncvisual_subtitle(const struct ncvisual* ncv);**
**int notcurses_lex_scalemode(const char* op, ncscale_e* scalemode);**
**const char* notcurses_str_scalemode(ncscale_e scalemode);**
**int notcurses_lex_blitter(const char* op, ncblitter_e* blitter);**
**const char* notcurses_str_blitter(ncblitter_e blitter);**
# DESCRIPTION
An **ncvisual** is a virtual pixel framebuffer. They can be created from
RGBA/BGRA data in memory (**ncvisual_from_rgba**/**ncvisual_from_bgra**),
or from the content of a suitable **ncplane** (**ncvisual_from_ncplane**).
If Notcurses was built against a multimedia engine (FFMpeg or OpenImageIO),
image and video files can be loaded into visuals using
**ncvisual_from_file**. **ncvisual_from_file** discovers the container
and codecs, but does not verify that the entire file is well-formed.
**ncvisual_decode** ought be invoked to recover subsequent frames, once
per frame.
Once the visual is loaded, it can be transformed using **ncvisual_rotate**
and **ncvisual_resize**. These are persistent operations, unlike any scaling
that takes place at render time. If a subtitle is associated with the frame,
it can be acquired with **ncvisual_subtitle**.
**ncvisual_from_rgba** and **ncvisual_from_bgra** both require a number of
**rows**, a number of image columns **cols**, and a virtual row length of
**rowstride** / 4 columns. The input data must provide 32 bits per pixel, and
thus must be at least **rowstride** * **rows** bytes, of which a **cols** *
**rows** * 4-byte subset is used. It is not possible to **mmap(2)** an image
file and use it directly--decompressed, decoded data is necessary. The
resulting plane will be ceil(**rows**/2) rows, and **cols** columns.
**ncvisual_from_plane** requires specification of a rectangle via **begy**,
**begx**, **leny**, and **lenx**. The only valid characters within this
region are those used by the **NCBLIT_2x2** blitter, though this may change
in the future.
**ncvisual_rotate** executes a rotation of **rads** radians, in the clockwise
(positive) or counterclockwise (negative) direction.
**ncvisual_subtitle** will return a UTF-8-encoded subtitle corresponding to
the current frame if such a subtitle was decoded. Note that a subtitle might
be returned for multiple frames, or might not.
**ncvisual_render** blits the visual to an **ncplane**, based on the contents
of its **struct ncvisual_options**. If **n** is not **NULL**, it specifies the
plane on which to render, and **y**/**x** specify a location within that plane.
Otherwise, a new plane will be created, and placed at **y**/**x** relative to
the rendering area. **begy**/**begx** specify the upper left corner of a
subsection of the **ncvisual** to render, while **leny**/**lenx** specify the
geometry of same. **flags** is a bitfield over:
* **NCVISUAL_OPTION_NODEGRADE** If the specified blitter is not available, fail rather than degrading.
* **NCVISUAL_OPTION_BLEND**: Render with **CELL_ALPHA_BLEND**.
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
# BLITTERS
The different **ncblitter_e** values select from among available glyph sets:
* **NCBLIT_DEFAULT**: Let the **ncvisual** choose its own blitter.
* **NCBLIT_1x1**: Full block (█) or empty glyph.
* **NCBLIT_2x1**: Adds the lower half block (▄) to **NCBLIT_1x1**.
* **NCBLIT_1x1x4**: Adds three shaded full blocks (▓▒░) to **NCBLIT_1x1**.
* **NCBLIT_2x2**: Adds left and right half blocks (▌▐) and quadrants (▖▗▟▙) to **NCBLIT_2x1**.
* **NCBLIT_4x1**: Adds ¼ and ¾ blocks (▂▆) to **NCBLIT_2x1**.
* **NCBLIT_BRAILLE**: 4 rows and 2 columns of braille (⡀⡄⡆⡇⢀⣀⣄⣆⣇⢠⣠⣤⣦⣧⢰⣰⣴⣶⣷⢸⣸⣼⣾⣿).
* **NCBLIT_8x1**: Adds ⅛, ⅜, ⅝, and ⅞ blocks (▇▅▃▁) to **NCBLIT_4x1**.
* **NCBLIT_SIXEL**: Sixel, a 6-by-1 RGB pixel arrangement.
# RETURN VALUES
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**notcurses_canopen_images** and **notcurses_canopen_videos** returns true if
images and videos, respecitvely, can be decoded, or false if Notcurses was
built with insufficient multimedia support.
**ncvisual_from_file** returns an **ncvisual** object on success, or **NULL**
on failure. Success indicates that the specified **file** was opened, and
enough data was read to make a firm codec identification. It does not imply
that the entire file is properly-formed. On failure, **err** will be updated.
**ncvisual_decode** returns **NCERR_SUCCESS** on success, or **NCERR_EOF** on
end of file, or some other **nc_err_e** on failure. It likewise updates **err**
in the event of an error. It is only necessary for multimedia-based visuals.
**ncvisual_from_plane** returns **NULL** if the **ncvisual** cannot be created
and bound. This is usually due to illegal content in the source **ncplane**.
Fully general ncvisual layer (#647) This represents an essentially complete rewrite of ncvisual and associated code. It had two major goals: Improve the ncvisual API based off lessons learned, pursuant to the upcoming API freeze. In particular, I wanted to: decouple ncvisuals from ncplanes. It should be possible to render a ncvisual to multiple planes, with different scaling each time. It should be possible to create an ncvisual without a plane, etc. normalize the various ways of constructing an ncvisual -- file, memory, plane, etc. Support multiple blitters, from 7-bit ASCII to Sixel. This required writing the blitters in several cases, and they're not yet in their final implementations (but the API is fine) I have not yet unified Plots and Visuals, and might not, given that the Plot code works fine. We could at this point implement Plots in terms of Visuals, though -- the blitter backend range has been unified. Sixel is not yet implemented, though it is listed. There is a new POC tool, blitter. It renders its arguments using all possible blitter+scaling combinations. Another new POC, resize, displays its argument, then resizes it to the screen size and displays that, explicitly making use of ncvisual_resize() rather than a scaling parameter to ncvisual_render(). This also eliminates some memory leaks and bugs we were seeing in trunk, and brings in Sixel scaffolding. The C++ wrapper will also need patching back up; I cut most of it down while wrestling with this crap, urk. Closes #638, #562, and #622.
4 years ago
**ncvisual_render** returns **NULL** on error, and otherwise the plane to
which the visual was rendered. If **opts->n** is provided, this will be
**opts->n**. Otherwise, a plane will be created, perfectly sized for the
visual and the specified blitter.
**ncvisual_geom** returns non-zero if the **blitter** is invalid.
# NOTES
Multimedia decoding requires that Notcurses be built with either FFmpeg or
OpenImageIO support. What formats can be decoded is totally dependent on the
linked library. OpenImageIO does not support subtitles.
# BUGS
**ncvisual_rotate** currently supports only **M_PI**/2 and -**M_PI**/2
radians for **rads**, but this will change soon.
# SEE ALSO
**notcurses(3)**,
**notcurses_plane(3)**,
**utf-8(7)**