the win32 and sd_notify components provided a disjointed set of
similar high level functionality so we consolidate these duplicate
code paths into one that has the same lifecycle regardless of platform
to reduce complexity of this feature.
this new component is responsible for reporting state changes to the
system layer and optionally propagating state change to lokinet
requested by the system layer (used by windows service).
Currently (from a recent PR) we aren't pinging oxend if not active, but
that behaviour ended up being quite wrong because lokinet needs to ping
even when decommissioned or deregistered (when decommissioned we need
the ping to get commissioned again, and if not registered we need the
ping to get past the "lokinet isn't pinging" nag screen to prepare a
registration).
This considerably revises the pinging behaviour:
- We ping oxend *unless* there is a specific error with our connections
(i.e. we *should* be establishing peer connections but don't have any)
- If we do have such an error, we send a new oxend "error" ping to
report the error to oxend and get oxend to hold off on sending uptime
proofs.
Along the way this also changes how we handle the current node state:
instead of just tracking deregistered/decommissioned, we now track three
states:
- LooksRegistered -- which means the SN is known to the network (but not
necessarily active or fully staked)
- LooksFunded -- which means it is known *and* is fully funded, but not
necessarily active
- LooksDecommissioned -- which means it is known, funded, and not
currently active (which implies decommissioned).
The funded (or more precisely, unfunded) state is now tracked in
rc_lookup_handler in a "greenlist" -- i.e. new SNs that are so new (i.e.
"green") that they aren't even fully staked or active yet.
If running as a service node, we ping core on a regular interval to
inform it we're running and in a good state. If we're an active
(not decommissioned or deregistered) service node and have too few
peers and thus we're not actually connected to lokinet, we should skip
that ping so core doesn't think we're ok.
* wintun vpn platform for windows
* bundle config snippets into nsis installer for exit node, keyfile persisting, reduced hops mode.
* use wintun for vpn platform
* isolate all windows platform specific code into their own compilation units and libraries
* split up internal libraries into more specific components
* rename liblokinet.a target to liblokinet-amalgum.a to elimiate ambiguity with liblokinet.so
* DNS platform for win32
* rename llarp/ev/ev_libuv.{c,h}pp to llarp/ev/libuv.{c,h}pp as the old name was idiotic
* split up net platform into win32 and posix specific compilation units
* rename lokinet_init.c to easter_eggs.cpp as that is what they are for and it does not need to be a c compilation target
* add cmake option STRIP_SYMBOLS for seperating out debug symbols for windows builds
* intercept dns traffic on all interfaces on windows using windivert and feed it into lokinet
* immediately poke routes when we are told to use an exit so that packets get pushed which makes an exit path happen
* fix up cmake oddity in nsis section
* add srv records in RCs if we have any
* add mechanism to add SRV records for plainquic exposed ports
* resign and republish rc or introset on srv record changes
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
loop->call(...) is similar to the old logic->Call(...), but is smart
about the current thread: if called from within the event loop it simply
runs the argument directly, otherwise it queues it.
Similarly most of the other event loop calls are also now thread-aware:
for example, `call_later(...)` can queue the job directly when called if
in the event loop rather than having to double-queue through the even
loop (once to call, then inside the call to initiate the time).
- removes all the llarp_ev_* functions, replacing with methods/classes/functions in the llarp
namespace.
- banish ev/ev.h to the void
- Passes various things by const lvalue ref, especially shared_ptr's that don't need to be copied
(to avoid an atomic refcount increment/decrement).
- Add a llarp::UDPHandle abstract class for UDP handling
- Removes the UDP tick handler; code that needs tick can just do a separate handler on the event
loop outside the UDP socket.
- Adds an "OwnedBuffer" which owns its own memory but is implicitly convertible to a llarp_buffer_t.
This is mostly needed to take over ownership of buffers from uvw without copying them as,
currently, uvw does its own allocation (pending some open upstream issues/PRs).
- Logic:
- add `make_caller`/`call_forever`/`call_every` utility functions to abstract Call wrapping and
dependent timed tasks.
- Add inLogicThread() so that code can tell its inside the logic thread (typically for
debugging assertions).
- get rid of janky integer returns and dealing with cancellations on call_later: the other methods
added here and the event loop code remove the need for them.
- Event loop:
- redo everything with uvw instead of libuv
- rename EventLoopWakeup::Wakeup to EventLoopWakeup::Trigger to better reflect what it does.
- add EventLoopRepeater for repeated events, and replace the code that reschedules itself every
time it is called with a repeater.
- Split up `EventLoop::run()` into a non-virtual base method and abstract `run_loop()` methods;
the base method does a couple extra setup/teardown things that don't need to be in the derived class.
- udp_listen is replaced with ev->udp(...) which returns a new UDPHandle object rather that
needing gross C-style-but-not-actually-C-compatible structs.
- Remove unused register_poll_fd_(un)readable
- Use shared_ptr for EventLoopWakeup rather than returning a raw pointer; uvw lets us not have to
worry about having the event loop class maintain ownership of it.
- Add factory EventLoop::create() function to create a default (uvw-based) event loop (previously
this was one of the llarp_ev_blahblah unnamespaced functions).
- ev_libuv: this is mostly rewritten; all of the glue code/structs, in particular, are gone as
they are no longer needed with uvw.
- DNS:
- Rename DnsHandler to DnsInterceptor to better describe what it does (this is the code that
intercepts all DNS to the tun IP range for Android).
- endpoint:
- remove unused "isolated network" code
- remove distinct (but actually always the same) variables for router/endpoint logic objects
- llarp_buffer_t
- make constructors type-safe against being called with points to non-size-1 values
- tun packet reading:
- read all available packets off the device/file descriptor; previously we were reading one packet
at a time then returning to the event loop to poll again.
- ReadNextPacket() now returns a 0-size packet if the read would block (so that we can implement
the previous point).
- ReadNextPacket() now throws on I/O error
- Miscellaneous code cleanups/simplifications
- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
* * refactor route poking out of llarp::Router and into llarp::RoutePoker
* only poke routes when we have an exit enabled as a client
* add route_poker header so it compiles
* split up ipv6 netmask
* revert iwp ack interval change
* c++17-isms in ip range map
* lambda-ize nodedb
* mutable lambdas in transit hops
* perfect forwarding of args in abstract router
* mutable lambdas in lokid rpc client
* notes in readme about nproc
This commit reflects changes to clang-format rules. Unfortunately,
these rule changes create a massive change to the codebase, which
causes an apparent rewrite of git history.
Git blame's --ignore-rev flag can be used to ignore this commit when
attempting to `git blame` some code.
This template-ifies Router::NotifyRouterEvent() up so that it accepts
the arguments to instantiate the specified event type, forwarding them
to std::make_unique. This would allow (in the future) the function to
no-op the call and avoid memory allocation. It also slightly reduces
the amount of code required to fire an event.
This commit also simplifies some of the RouterEvent code to reduce
redundancy.
Router now has a hive pointer if LOKINET_HIVE is set.
llarp::Context has a method InjectHive to give Router the pointer.
Router has a method NotifyRouterEvent which does:
- when LOKINET_HIVE is set, passes the event to RouterHive
- else when LOKINET_DEBUG is set, prints the event at a low log level
- else NOP
