* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
when a path expires or fails or something causes its lifecycle to end we have cleanup
logic that handles clean up for it. this removes a code path that was crashing that
is duplicated elsewhere and is thus probably safe to bin. yolo.
* enable client relay profiling by default
* macos dns fixes
* improve peer profiling algorithm to track timeouts vs failures
* remove debug ioctl call in tuntap code
* use ub_wait instead of ub_process as that was what was there before
* const correctness
* DRY out checking for SIIT
* typofix
* correct name
* more aggressive path building.
* do more than one in parallel path builds at a time
* correct last commit's logic
* rename numPaths -> numDesiredPaths to clarify intent
* revert string change as it will break a lot
* don't prematurly short circuit on snode builds
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* initial relay side lns
* fix typo
* add reserved names and refactor test for dns
* lns name decryption
* all wired up (allegedly)
* refact to use service::EncryptedName for LNS responses to include nonce with ciphertext
* fully rwemove tag_lookup_job
* replace lns cache with DecayingHashTable
* check for lns name validity against the following rules:
* not localhost.loki, loki.loki, or snode.loki
* if it contains no dash then max 32 characters long, not including the .loki tld (and also assuming a leading subdomain has been stripped)
* These are from general DNS requirements, and also enforced in
registrations:
* Must be all [A-Za-z0-9-]. (A-Z will be lower-cased by the RPC call).
* cannot start or end with a -
* max 63 characters long if it does contain a dash
* cannot contain -- in the third and fourth characters unless it starts with xn--
* handle timeout in name lookup job by calling the right handler with std::nullopt
* split up ipv6 netmask
* revert iwp ack interval change
* c++17-isms in ip range map
* lambda-ize nodedb
* mutable lambdas in transit hops
* perfect forwarding of args in abstract router
* mutable lambdas in lokid rpc client
* notes in readme about nproc
* rework net code for ip ranges to be cleaner
* clean up endpoint auth code
* refactor config to validate network configs before setting up endpoints
* remove buildone from path/pathbuilder.cpp so we don't spam connection attempts
This replaces all use of std::optional's `opt.value()` with `*opt`
because macOS is great and the ghost of Steve Jobs says that actually
supporting std::optional's value() method is not for chumps before macOS
10.14. So don't use it because Apple is great.
Pretty much all of our use of it actually is done better with operator*
anyway (since operator* doesn't do a check that the optional has a
value).
Also replaced *most* of the `has_value()` calls with direct bool
context, except for one in the config section which looked really
confusing at a glance without a has_value().
This commit reflects changes to clang-format rules. Unfortunately,
these rule changes create a massive change to the codebase, which
causes an apparent rewrite of git history.
Git blame's --ignore-rev flag can be used to ignore this commit when
attempting to `git blame` some code.
This template-ifies Router::NotifyRouterEvent() up so that it accepts
the arguments to instantiate the specified event type, forwarding them
to std::make_unique. This would allow (in the future) the function to
no-op the call and avoid memory allocation. It also slightly reduces
the amount of code required to fire an event.
This commit also simplifies some of the RouterEvent code to reduce
redundancy.
hive.py is currently largely for testing the pybind stuff, so changes to it will likely
be frequent and arbitrary for now.
Added pybind for llarp::path::PathHopConfig, but not every member -- just rc and upstream routerID
Hive now uses std::queue with mutex instead of our lockless queue.
Removed some functions from Hive that will not be necessary as things are being handled from python.
