* add ip6-range option to network section to control which range we want to use for ipv6 traffic
* make ip6-range able to disable ipv6 exits ( i dont like this but eh )
- Make SockAddr endian arguments explicit
- Consolidate port-less contructors and port constructors into one with
a default port of 0.
- Add {h,n}uint128_t ctors for construction from IPv6 addrs
- De-lambda a lambda that is only called once, immediately after it is
defined.
- C++17 modernize key-value for loops
- Remove unused (and useless) method
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
ip packet on read error was returning an uninitialized ip packet with non zero size so it was thinking it was a valid packet.
value initialize it to set the packet size to zero by default.
this fixed it in an emulator at least...
call(), when invoked from the logic thread, wasn't triggering a wakeup
which stalled some traffic (such as client-to-snode packets).
Fix it by triggering a wakeup on `call()`, and expose it because this is
a useful thing to be able to do.
The `const sockaddr*` conversion was returning a pointer to the
sockaddr_in6, but with its family set to AF_INET, so the receiving code
would have treated interpreting the result as a sockaddr_in pointer --
but it isn't, and trying to get the IPv4 from the mis-reinterpreted
sockaddr_in6 fails; this then prevented uvw UDP binding (which uses the
sockaddr* operator) from working.
This changes it to always leave the family value at the proper value and
using the ipv6_is_mapped_ipv4 check to determine when we have (and
should return) a pointer to the sockaddr_in rather than the
sockaddr_in6.
Also fixes toString() to compare the full prefix instead of just bytes
10 and 11.
loop->call(...) is similar to the old logic->Call(...), but is smart
about the current thread: if called from within the event loop it simply
runs the argument directly, otherwise it queues it.
Similarly most of the other event loop calls are also now thread-aware:
for example, `call_later(...)` can queue the job directly when called if
in the event loop rather than having to double-queue through the even
loop (once to call, then inside the call to initiate the time).
- removes all the llarp_ev_* functions, replacing with methods/classes/functions in the llarp
namespace.
- banish ev/ev.h to the void
- Passes various things by const lvalue ref, especially shared_ptr's that don't need to be copied
(to avoid an atomic refcount increment/decrement).
- Add a llarp::UDPHandle abstract class for UDP handling
- Removes the UDP tick handler; code that needs tick can just do a separate handler on the event
loop outside the UDP socket.
- Adds an "OwnedBuffer" which owns its own memory but is implicitly convertible to a llarp_buffer_t.
This is mostly needed to take over ownership of buffers from uvw without copying them as,
currently, uvw does its own allocation (pending some open upstream issues/PRs).
- Logic:
- add `make_caller`/`call_forever`/`call_every` utility functions to abstract Call wrapping and
dependent timed tasks.
- Add inLogicThread() so that code can tell its inside the logic thread (typically for
debugging assertions).
- get rid of janky integer returns and dealing with cancellations on call_later: the other methods
added here and the event loop code remove the need for them.
- Event loop:
- redo everything with uvw instead of libuv
- rename EventLoopWakeup::Wakeup to EventLoopWakeup::Trigger to better reflect what it does.
- add EventLoopRepeater for repeated events, and replace the code that reschedules itself every
time it is called with a repeater.
- Split up `EventLoop::run()` into a non-virtual base method and abstract `run_loop()` methods;
the base method does a couple extra setup/teardown things that don't need to be in the derived class.
- udp_listen is replaced with ev->udp(...) which returns a new UDPHandle object rather that
needing gross C-style-but-not-actually-C-compatible structs.
- Remove unused register_poll_fd_(un)readable
- Use shared_ptr for EventLoopWakeup rather than returning a raw pointer; uvw lets us not have to
worry about having the event loop class maintain ownership of it.
- Add factory EventLoop::create() function to create a default (uvw-based) event loop (previously
this was one of the llarp_ev_blahblah unnamespaced functions).
- ev_libuv: this is mostly rewritten; all of the glue code/structs, in particular, are gone as
they are no longer needed with uvw.
- DNS:
- Rename DnsHandler to DnsInterceptor to better describe what it does (this is the code that
intercepts all DNS to the tun IP range for Android).
- endpoint:
- remove unused "isolated network" code
- remove distinct (but actually always the same) variables for router/endpoint logic objects
- llarp_buffer_t
- make constructors type-safe against being called with points to non-size-1 values
- tun packet reading:
- read all available packets off the device/file descriptor; previously we were reading one packet
at a time then returning to the event loop to poll again.
- ReadNextPacket() now returns a 0-size packet if the read would block (so that we can implement
the previous point).
- ReadNextPacket() now throws on I/O error
- Miscellaneous code cleanups/simplifications
when retransmissions happen, they will be executed in a deterministic order by their delivery id.
this reduces the jitter from delayed message delivery on link layer as with an unordered map the order of iteration is "random",
so when we iterate all messages for retransmission we do it lowest id first (the messages queued first).
- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
- Remove SIIT from method names & comments because we're doing IPv4
mapped addresses (::ffff:0:0/96) rather than actual SIIT
(::ffff:0:0:0/96).
- add constructor taking a string+numeric port (and then don't allow a
port in the string).
- simplify IP string parsing by using parse_int()
- replace addrIsV4 with call to ipv6_is_mapped_ipv4 (this also fixes a
bug where addrIsV4 was not checking for leading 0s and so could return
true for a public IPv6 that happened to have ffff in the wrong spot).
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
when a path expires or fails or something causes its lifecycle to end we have cleanup
logic that handles clean up for it. this removes a code path that was crashing that
is duplicated elsewhere and is thus probably safe to bin. yolo.
* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
this fixes the gui bug where it hangs on adding an exit becuase loopback gets routed over the exit.
before it was causing the lmq connection to hang becuase of that route change.
* fix deadlock in #1453
* remove use of shared_lock in profiling
* clean up Save and Load to acquire lock
* bencode and bdecode are now non locking
* remove all places using std::shared_lock
* bail if write fails
* deny message delivery from non registered nodes when whitelist is enabled and applicable
* use DoCallback and return true so that the event gets fired right
* add exit.localhost.loki cname record
* return cname in localhost.loki A/AAAA lookup reply
* correctly handle case where we have no exit
* typofix
* simplify logic
So apparently dnsConfig in Router was never set.
Router::networkConfig was set, but only used in the function
which set it and otherwise only passed to another function once.
dnsConfig was only used in one place.
both member variables have been removed in favor of just
referencing Router::m_Config.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* llarp::Config constructor can take an empty fs::path now and it will default to fs::current_path
* llarp::ensureConfig now throws on fs error
* updates to daemon/main.cpp to reflect changes to llarp::ensureConfig's new throwability
* dowse parts of the code with holy water for the 0.8.1 tag
* Update how we build libuv
- Update submoduled libuv to latest stable (1.40.0)
- Don't look for a system libuv if we're under BUILD_STATIC_DEPS
- Add a libuv interface library rather than using globals
- Make the windows build fall back to the submodule if not explicitly
given a LIBUV_ROOT
* Replace ${LIBS} global with `base_libs` interface
This simplifies linking and include handling a bit.
* Remove unneeded header
* Add missing csignal header
(This was previously being pulled in incredibly indirectly via some
stuff that eventually includes some other stuff that eventually included
uv.h)
* Use GNUInstallDirs to get lib dir instead of hard-coding lib
Fixes#1429
* enable client relay profiling by default
* macos dns fixes
* improve peer profiling algorithm to track timeouts vs failures
* remove debug ioctl call in tuntap code
* use ub_wait instead of ub_process as that was what was there before
* const correctness
* DRY out checking for SIIT
* typofix
* correct name
* more aggressive path building.
* do more than one in parallel path builds at a time
* correct last commit's logic
* rename numPaths -> numDesiredPaths to clarify intent
* revert string change as it will break a lot
* don't prematurly short circuit on snode builds
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* Should fix some windows service issues
* fix return condition inversion
* Add some Trace level logging
also make the logger actually respect the log level you set.
* event loop should not queue things to itself...
at present, logic thread queue continues until it is empty, so
queueing things onto itself is just wasteful.
* call_later(foreach thing) is better than foreach thing (call later)
also if you already queued those things but they have not happened yet,
there is no sense to queue them to happen again.
* do not queue read on write finish, only on read finish
* failure to start DNS server should be proper startup failure.
without the DNS server working lokinet is...kinda pointless, right?
* format
* don't queue stuff to logic thread if in logic thread
the thing that clears the queue...clears it. So you're just delaying and adding overhead.
* windows unbound thread sleep instead of just busy-waiting
also clang-format decided I can't have a blank line for some reason...
* fix unbound async worker on windows
* add conf.d directory for config overrides
* refactor llarp::Config
* add explicit constructor with datadir as parameter
* have all config files be passed as std::optional
* make Config::LoadDefault private and use std::optional in Config::Load to remove ambiguity
* update rest of codebase to reflect above changes
* fix pybind
* rename bootstrap config skipBootstrap to seednode as it's more descriptive
* make seednode configurable
* make pybind layer compile
* make pybind layer run
If not using an exit, messing with the routing table is not good.
As such, the ability to keep track of routes we *might* want is good,
but the ability to set/unset those routes is necessary, to correspond
to enabling/disabling exit functionality.
* add some dns txt records for stuff we want to expose
* fix txt records
* txt records for snode info
* dont send cname as it mangles the response
* check for 3 parts not 3 characters
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
If you specify upstream= then you get no upstream, if you give one then
you use that instead of the default, but you can still list multiple.
unbound doesn't support an upstream port, so bail if the user gives a
non-port-53 response.
0.7 supported both public-address and public-ip, but only the former was
being allowed in 0.8.
This makes `public-ip=...` work again, and makes it the canonical option
(because it makes a bit more sense than address when we also have the
public-port parameter), while making `public-address=` accepted with a
deprecation warning.
Also adds default descriptions for port and ip for the generated ini.
* serialize auth codes in rpc
* format
* format
* config and route fixups
* bump lokimq
* fix compile
* discard unknown members in service keys
* format
* prepare for keytool script
* dont serialize ephemeral members in service key file
* regnerate ephemeral members in service identity on load
* add keygen script
* use nacl for generating keys
* format
* initial work for RC SRVs.
Needs tests for new RC format.
Needs SRVs added to new RC, and associated tests.
* convert rc sign/verify test to catch2, add test for new rc
Also fixes a mistake in new rc serialization
* bump loki-mq submodule
need support for viewing bt deserialize consumer buffer so we
know how much it has consumed.
* fix some behavior errors
need to advance llarp_buffer_t after consuming data from it
only rewind and modify size of llarp_buffer_t in owning context.
* Add test for router contact (de-)serialization
Adds a test that makes a list of RouterContact with mixed
versions and ensures it serializes and deserializes correctly.
* * refactor route poking out of llarp::Router and into llarp::RoutePoker
* only poke routes when we have an exit enabled as a client
* add route_poker header so it compiles
* ignore tun interfaces on windows for mitigating foot cannons
* add flag for git add -p when using format verifier as git hook
* use explicit path for route command on windows
* fix typo
* fix typo
* remove hunk for win32 route exclusion based off being a tun interface
* add metric to win32 route command
* * refactor win32 route poking to use a common function for iterating over routes
* put interface in route poking for default route
* mnake it compile
* use correct route command on windows
* use fs::path for service::Identity::EnsureKeys
* Add ignored [dns]no-resolvconf option for deb backwards compat
The debs hack a `#no-resolvconf=1` into the config file in 0.7 to allow
a user to disable resolvconf setup during startup by uncommenting it.
That doesn't work anymore since 0.8 errors on invalid config options, so
add it as an ignored option so that 0.7 deb config files can still be
compatible.
* Fix `[dns]upstream` comment not being produced in generated conf file
* fix test
Co-authored-by: Jeff <jeff@i2p.rocks>
* it lives?
* clean up
* add readme and add x86_64 to abi filters
* disable route poking on android
* make it compile on android
* it compiles!!111
* typofix
* re-enable ccache for android
* initial relay side lns
* fix typo
* add reserved names and refactor test for dns
* lns name decryption
* all wired up (allegedly)
* refact to use service::EncryptedName for LNS responses to include nonce with ciphertext
* fully rwemove tag_lookup_job
* replace lns cache with DecayingHashTable
* check for lns name validity against the following rules:
* not localhost.loki, loki.loki, or snode.loki
* if it contains no dash then max 32 characters long, not including the .loki tld (and also assuming a leading subdomain has been stripped)
* These are from general DNS requirements, and also enforced in
registrations:
* Must be all [A-Za-z0-9-]. (A-Z will be lower-cased by the RPC call).
* cannot start or end with a -
* max 63 characters long if it does contain a dash
* cannot contain -- in the third and fourth characters unless it starts with xn--
* handle timeout in name lookup job by calling the right handler with std::nullopt
