mirror of
https://github.com/0xAX/linux-insides
synced 2024-11-05 21:20:59 +00:00
191 lines
10 KiB
Markdown
191 lines
10 KiB
Markdown
interrupt-descriptor table (IDT)
|
|
================================================================================
|
|
|
|
Three general interrupt & exceptions sources:
|
|
|
|
* Exceptions - sync;
|
|
* Software interrupts - sync;
|
|
* External interrupts - async.
|
|
|
|
Types of Exceptions:
|
|
|
|
* Faults - are precise exceptions reported on the boundary `before` the instruction causing the exception. The saved `%rip` points to the faulting instruction;
|
|
* Traps - are precise exceptions reported on the boundary `following` the instruction causing the exception. The same with `%rip`;
|
|
* Aborts - are imprecise exceptions. Because they are imprecise, aborts typically do not allow reliable program restart.
|
|
|
|
`Maskable` interrupts trigger the interrupt-handling mechanism only when RFLAGS.IF=1. Otherwise they are held pending for as long as the RFLAGS.IF bit is cleared to 0.
|
|
|
|
`Nonmaskable` interrupts (NMI) are unaffected by the value of the rFLAGS.IF bit. However, the occurrence of an NMI masks further NMIs until an IRET instruction is executed.
|
|
|
|
Specific exception and interrupt sources are assigned a fixed vector-identification number (also called an “interrupt vector” or simply “vector”). The interrupt vector is used by the interrupt-handling mechanism to locate the system-software service routine assigned to the exception or interrupt. Up to
|
|
256 unique interrupt vectors are available. The first 32 vectors are reserved for predefined exception and interrupt conditions. They are defined in the [arch/x86/include/asm/traps.h](http://lxr.free-electrons.com/source/arch/x86/include/asm/traps.h#L121) header file:
|
|
|
|
```
|
|
/* Interrupts/Exceptions */
|
|
enum {
|
|
X86_TRAP_DE = 0, /* 0, Divide-by-zero */
|
|
X86_TRAP_DB, /* 1, Debug */
|
|
X86_TRAP_NMI, /* 2, Non-maskable Interrupt */
|
|
X86_TRAP_BP, /* 3, Breakpoint */
|
|
X86_TRAP_OF, /* 4, Overflow */
|
|
X86_TRAP_BR, /* 5, Bound Range Exceeded */
|
|
X86_TRAP_UD, /* 6, Invalid Opcode */
|
|
X86_TRAP_NM, /* 7, Device Not Available */
|
|
X86_TRAP_DF, /* 8, Double Fault */
|
|
X86_TRAP_OLD_MF, /* 9, Coprocessor Segment Overrun */
|
|
X86_TRAP_TS, /* 10, Invalid TSS */
|
|
X86_TRAP_NP, /* 11, Segment Not Present */
|
|
X86_TRAP_SS, /* 12, Stack Segment Fault */
|
|
X86_TRAP_GP, /* 13, General Protection Fault */
|
|
X86_TRAP_PF, /* 14, Page Fault */
|
|
X86_TRAP_SPURIOUS, /* 15, Spurious Interrupt */
|
|
X86_TRAP_MF, /* 16, x87 Floating-Point Exception */
|
|
X86_TRAP_AC, /* 17, Alignment Check */
|
|
X86_TRAP_MC, /* 18, Machine Check */
|
|
X86_TRAP_XF, /* 19, SIMD Floating-Point Exception */
|
|
X86_TRAP_IRET = 32, /* 32, IRET Exception */
|
|
};
|
|
```
|
|
|
|
Error Codes
|
|
--------------------------------------------------------------------------------
|
|
|
|
The processor exception-handling mechanism reports error and status information for some exceptions using an error code. The error code is pushed onto the stack by the exception-mechanism during the control transfer into the exception handler. The error code has two formats:
|
|
|
|
* most error-reporting exceptions format;
|
|
* page fault format.
|
|
|
|
Here is format of selector error code:
|
|
|
|
```
|
|
31 16 15 3 2 1 0
|
|
+-------------------------------------------------------------------------------+
|
|
| | | T | I | E |
|
|
| Reserved | Selector Index | - | D | X |
|
|
| | | I | T | T |
|
|
+-------------------------------------------------------------------------------+
|
|
```
|
|
|
|
Where:
|
|
|
|
* `EXT` - If this bit is set to 1, the exception source is external to the processor. If cleared to 0, the exception source is internal to the processor;
|
|
* `IDT` - If this bit is set to 1, the error-code selector-index field references a gate descriptor located in the `interrupt-descriptor table`. If cleared to 0, the selector-index field references a descriptor in either the `global-descriptor table` or local-descriptor table `LDT`, as indicated by the `TI` bit;
|
|
* `TI` - If this bit is set to 1, the error-code selector-index field references a descriptor in the `LDT`. If cleared to 0, the selector-index field references a descriptor in the `GDT`.
|
|
* `Selector Index` - The selector-index field specifies the index into either the `GDT`, `LDT`, or `IDT`, as specified by the `IDT` and `TI` bits.
|
|
|
|
Page-Fault Error Code format is:
|
|
|
|
```
|
|
31 4 3 2 1 0
|
|
+-------------------------------------------------------------------------------+
|
|
| | | R | U | R | - |
|
|
| Reserved | I/D | S | - | - | P |
|
|
| | | V | S | W | - |
|
|
+-------------------------------------------------------------------------------+
|
|
```
|
|
|
|
Where:
|
|
|
|
* `I/D` - If this bit is set to 1, it indicates that the access that caused the page fault was an instruction fetch;
|
|
* `RSV` - If this bit is set to 1, the page fault is a result of the processor reading a 1 from a reserved field within a page-translation-table entry;
|
|
* `U/S` - If this bit is cleared to 0, an access in supervisor mode (`CPL=0, 1, or 2`) caused the page fault. If this bit is set to 1, an access in user mode (CPL=3) caused the page fault;
|
|
* `R/W` - If this bit is cleared to 0, the access that caused the page fault is a memory read. If this bit is set to 1, the memory access that caused the page fault was a write;
|
|
* `P` - If this bit is cleared to 0, the page fault was caused by a not-present page. If this bit is set to 1, the page fault was caused by a page-protection violation.
|
|
|
|
Interrupt Control Transfers
|
|
--------------------------------------------------------------------------------
|
|
|
|
The IDT may contain any of three kinds of gate descriptors:
|
|
|
|
* `Task Gate` - contains the segment selector for a TSS for an exception and/or interrupt handler task;
|
|
* `Interrupt Gate` - contains segment selector and offset that the processor uses to transfer program execution to a handler procedure in an interrupt handler code segment;
|
|
* `Trap Gate` - contains segment selector and offset that the processor uses to transfer program execution to a handler procedure in an exception handler code segment.
|
|
|
|
General format of gates is:
|
|
|
|
```
|
|
127 96
|
|
+-------------------------------------------------------------------------------+
|
|
| |
|
|
| Reserved |
|
|
| |
|
|
+--------------------------------------------------------------------------------
|
|
95 64
|
|
+-------------------------------------------------------------------------------+
|
|
| |
|
|
| Offset 63..32 |
|
|
| |
|
|
+-------------------------------------------------------------------------------+
|
|
63 48 47 46 44 42 39 34 32
|
|
+-------------------------------------------------------------------------------+
|
|
| | | D | | | | | | |
|
|
| Offset 31..16 | P | P | 0 |Type |0 0 0 | 0 | 0 | IST |
|
|
| | | L | | | | | | |
|
|
-------------------------------------------------------------------------------+
|
|
31 16 15 0
|
|
+-------------------------------------------------------------------------------+
|
|
| | |
|
|
| Segment Selector | Offset 15..0 |
|
|
| | |
|
|
+-------------------------------------------------------------------------------+
|
|
```
|
|
|
|
Where
|
|
|
|
* `Selector` - Segment Selector for destination code segment;
|
|
* `Offset` - Offset to handler procedure entry point;
|
|
* `DPL` - Descriptor Privilege Level;
|
|
* `P` - Segment Present flag;
|
|
* `IST` - Interrupt Stack Table;
|
|
* `TYPE` - one of: Local descriptor-table (LDT) segment descriptor, Task-state segment (TSS) descriptor, Call-gate descriptor, Interrupt-gate descriptor, Trap-gate descriptor or Task-gate descriptor.
|
|
|
|
An `IDT` descriptor is represented by the following structure in the Linux kernel (only for `x86_64`):
|
|
|
|
```C
|
|
struct gate_struct64 {
|
|
u16 offset_low;
|
|
u16 segment;
|
|
unsigned ist : 3, zero0 : 5, type : 5, dpl : 2, p : 1;
|
|
u16 offset_middle;
|
|
u32 offset_high;
|
|
u32 zero1;
|
|
} __attribute__((packed));
|
|
```
|
|
|
|
which is defined in the [arch/x86/include/asm/desc_defs.h](http://lxr.free-electrons.com/source/arch/x86/include/asm/desc_defs.h#L51) header file.
|
|
|
|
A task gate descriptor does not contain `IST` field and its format differs from interrupt/trap gates:
|
|
|
|
```C
|
|
struct ldttss_desc64 {
|
|
u16 limit0;
|
|
u16 base0;
|
|
unsigned base1 : 8, type : 5, dpl : 2, p : 1;
|
|
unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
|
|
u32 base3;
|
|
u32 zero1;
|
|
} __attribute__((packed));
|
|
```
|
|
|
|
Exceptions During a Task Switch
|
|
--------------------------------------------------------------------------------
|
|
|
|
An exception can occur during a task switch while loading a segment selector. Page faults can also occur when accessing a TSS. In these cases, the hardware task-switch mechanism completes loading the new task state from the TSS, and then triggers the appropriate exception mechanism.
|
|
|
|
**In long mode, an exception cannot occur during a task switch, because the hardware task-switch mechanism is disabled.**
|
|
|
|
Nonmaskable interrupt
|
|
--------------------------------------------------------------------------------
|
|
|
|
**TODO**
|
|
|
|
API
|
|
--------------------------------------------------------------------------------
|
|
|
|
**TODO**
|
|
|
|
Interrupt Stack Table
|
|
--------------------------------------------------------------------------------
|
|
|
|
**TODO**
|