Specifically, don't forcibly unschedule/schedule on every input event, instead, let the scheduled task figure out if the deadline came to pass or not ;).
c.f., https://github.com/koreader/koreader/pull/8970#issuecomment-1092775830
Besides getting rid of some overhead, this allows proper scheduling after a task that would have blocked for longer than the standby timeout.
* Handle said rotation shenanigans inside ScreenSaver & ScreenSaverWidget, which allows a more targeted approach; and prevents said rotation from affecting other widgets. (Also, gets rid of duplicated code).
* Handle the corner-case or exiting early from a "keep on screen for n sec" screensaver better, by unscheduling the extra refresh, since an early tap took care of that already.
Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* Ignore hardware sleep button
When running KOReader with a launcher, having the power button trigger the Power event conflicts with the launcher's built-in screensaver (see https://github.com/koreader/koreader/issues/8891). This commit ignores the hardware power button in KOReader and lets the launcher handle sleep and wake normally.
* Disable autosuspend
If a launcher is active, there will be no way to un-suspend because the power button is ignored by KOReader and handled by the launcher.
* Ignore power button only if Oxide is running
Same with disabling auto suspend
* Only toggle nightmode via the grayscale fb info flag on Kindle
Most NTX boards require elaborate trickery (see fbdepth) to actually
send a vput ioctl without the driver screwing with the rotation behind
your back.
This was causing spurious hardware rotations on exit on most Kobo
devices, something which might have gone mostly unnoticed, as current
Nickel versions will sanitize it on startup.
A simple repro was instead to start an USBMS session, as that exits
KOReader and restarts it without going through fbdepth again ;).
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
Function `SetSubtaskInfo` takes only chars as a valid book. Since
filename can be `nil` (not a char) the crash would happen. This
Change avoids the crash by using a char type nil value. See:
`int SetSubtaskInfo(int task, int subtask, const char *name, const char *book);`
Fixes#8053Fixes#8392 too
Fixes#8743 last issue
With the inkview library inverting the screen seems possible but needs some
discussion with the developers of Pocketbook. For now disable HWInvert so
this feature is not broken while we figure out how to change the invert with inkview.
widget
Since we only use a single icon, we have to take a few shortcuts:
* The icon itself is computed based on the average of both batteries.
* The actual value is the sum of both batteries.
* Much like everywhere else, charging means the *aux* battery charging
(i.e., connected to a power source).
Re #8741, which does the same for ReaderHeader.
This change drops the #koreader signature check.
This check prevents KOReader from modifying associations if something else has changed the file without putting a verbatim "#koreader" string back.
While this prevents KOReader from interfering with another application or the system trying to own the file, it also leads to hard to diagnose issues, when the user can inadvertently change associations without realising they’re doing so, and being unable to return back.
I've emailed with PocketBook about the problem with Wifi on the newer models. They explained the wrong constant was being used:
> Dear Robert,
>
> Thank you for choosing Pocketbook.
> Wi-Fi Connection" enabled when no connection:
> https://github.com/koreader/koreader/issues/8617
> The problem is in incorrect usage of constant. You should use flag NET_CONNECTED with bit AND operation as shown in example below.
>
> function NetworkMgr:isWifiOn()
> local state = inkview.QueryNetwork()
> return band(state, C.NET_CONNECTED) ~= 0
> end
>
> Inkpad3 Wifi Standby
> https://github.com/koreader/koreader/issues/4747
> the same solution for this issue
Related issues:
https://github.com/koreader/koreader/issues/8617https://github.com/koreader/koreader/issues/4747
Since I made the previous hack and their suggestion seems to work on the PB741 color. I've made this PR to remove my hack.
It might be wise to also test this fix on older models.
* The first few capacity reads after connecting to the cover may fail
* The PowerCover may trigger spurious move/add usb_plug uevent,
which translate into Charging events for us.
Instead of blindly lighting up the charging LED on those,
check if the device is actually charging, first.
Implement it on the Kobo Sage, for the PowerCover
TouchMenu: Display auxiliary battery status
Kobo: More accurately report the PowerCover's charging status
i.e., try to actually figure out if the auxiliary battery is charging
instead of just checking the reader's battery (because that one will
often swap between the charging and discharging state as it drains the
aux battery...).
PowerD: Use a cached timestamp when doing battery pull checks
Fixes#4747.
Apparently, inkview.NetConnect() doesn’t enable the Wi-Fi on its own,
this results in a failure if the device has been put into the sleep or
standby mode, when the Wi-Fi hardware is powered down.
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Wrap document opening and re-renderings (which can block
the app for some time) with setIgnoreInput() to avoid ANR
on Android.
Any setting update that could possibly cause a re-rendering
should send the UpdatePos event, to ensure the re-rendering
happens in ReaderRolling:onUpdatePos() where precautions
are taken to avoid ANR.
screen.
Otherwise, on the Sage, weird flash glitches may happen, depending on
what was on screen...
(e.g., there's some weird update merging shenanigans going on
despite those updates being flagged NO_MERGE...).
cores
* Only keep a single core online most of the time.
* Device: Add an enableCPUCores method to allow controlling the amount of
online CPU cores.
* Move the initial core onlining setup to Kobo:init, instead of the startup script.
* Enable two CPU cores while hinting new (e.g., cache miss) pages in PDF land.
* Enable two CPU cores while processing book metadata.
* Drive-by fix to isolate the DocCache pressure check to KoptInterface
and actually apply it when it matters most (e.g., k2pdfopt stuff).
We should always unschedule suspend before scheduling it again (i.e.,
use rescheduleSuspend ;)).
Fix#8097 (many thanks to @Mel-kior for the detailed repro!)
It turns out that the kernel needs a little push now that the dedicated
wifi power control module is gone ;).
Issue was only exposed if you booted KOReader while the Wi-Fi was down.
* Decode EV_KEY:KEY_BATTERY
* Input: Only drop hovering *pen* events.
There are currently too many broken 0-pressure *finger* events being
reported on the Elipsa, making a dumb rejection highly annoying.
* Bump base
https://github.com/koreader/koreader-base/pull/1393
* Rely on actual events to detect loss of contact for the "snow"
protocol.
Allows simplifying the whole thing.
* Use `ipairs` over `pairs` for pure arrays.
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
We've managed to trip a few of those on dimen fields post-init but
pre-paintTo in a few weird coner-cases, a point at which dimen is often
nil.
ConfigDialog: Deal with that very thing in update()
Fix#7656
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* TimeVal: Log the results of the COARSE probes in debug logs
* GestureDetector: Print details of failed clock probes in debug logs
* GestureDetector: Skip the BOOTTIME probe when CLOCK_BOOTTIME is unsupported.
* Input: Decode ABS_DISTANCE events in debug logs
* Get rid of duplicated <linux/input.h> constants, use the FFI module everywhere (re #7536)
* Kobo: Get rid of the `touch_alyssum_protocol` quirk. Replace it by setting `main_finger_slot` to `1`, like on the H2O.
The Wacom pen reports sane CLOCK_REALTIME timestamps, but the Touchscreen reports timestamps frozen at the boot time ts (in REALTIME) :s.
So, make everyone use synthetic CLOCK_MONOTONIC timestamps in order to make gesture detection behave.
Requires https://github.com/koreader/koreader-base/pull/1344 & https://github.com/koreader/koreader-base/pull/1346 (fix#7485)
Assorted input fixes:
* Actually handle errors in the "there's a callback timer" input polling loop.
* Don't break timerfd when the clock probe was inconclusive.
Not directly related, but noticed because of duplicate onInputEvent handlers:
* HookContainer: Fix deregistration to actually deregister properly. "Regression" extant since its inception in #2933 (!).
* Made sure the three plugins (basically the trio of AutoThingies ;p) that were using HookContainer actually unschedule their task on teardown.
* Actually load librt properly on old Linux systems (fix#7472)
* Made sure SDL & Android honored timeouts properly in some edgy (or not so edgy, in SDL's case) cases (c.f., https://github.com/koreader/koreader-base/pull/1343).
* Try harder not to consume a timer callback when the timerfd backend is in use and `select` timed out *not* because of a timerfd expiring. This would take some particularly heinous timing to reproduce (e.g., a timerfd set, but a task deadline expiring *before* it). May or may not help with #7473.
* Decode `BTN_` KEY codes in verbose debug logs.
* Fix MultiTouch on the H2O (GestureDetector was hard-coding the two slots as 0 & 1, but the H2O kernel is a special snowflake that doesn't use slot 0, instead switching to slot 1 & 2).
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
NiLuJe
zwim
Will
Philip Chan
Robert-Jan de Dreu
Frans de Jonge
Robert-Jan de Dreu
Andrej Shadura
roshavagarga
Martín Fernández
poire-z
yparitcher
Andrej Shadura
Mike Kozlowski
ElimGarak1
Galunid
Martín Fdez
hius07
gbyl
Glen Sawyer