* Kobo: Discriminate between the Touch A/B and the Touch C properly, and implement actual support for the A/B input quirks. This means the clunky touchscreen probe widget shown on fresh installs on those devices is now gone :}.
* Input: Fix an off-by-one in most adjustTouchMirrorX/Y callers (only rM was doing it right), and adjust their documentation to avoid similar mistakes in the future.
* GestureDetector: Unify logging to always display transformed coordinates for simple gestures.
* GestureDetector: Fix two-contact hold lifts to be computed at the midpoint between the two contacts, like their holds counterpart already did.
* Kobo: Switch ST devices to a dedicated input handler
Instead of shoehorning a hack into the standard handler.
* Use setCurrentMtSlotChecked in handleTouchEvLegacy
slots
This ensures we won't leave *any* slot in an undefined state because
we skipped parsing 'em because what we consumed first yielded a
gesture.
(In particular, this could leave a few slots dangling in the "hold"
state in corner cases involving spider-hand finger tapping ;p).
Cleans up the slot state clearing in GestureDetector to only clear the
necessary slots (e.g., two-finger gestures now only clear their own two
slots; and holds only clear their own slot).
The fact that every slot will be consumed ensures that every slot will
naturally get their contact up handled, which wasn't the case before,
hence those crappy workarounds.
As far as timerfd callbacks are concerned, this *does* introduce the
possibility of deadline collisions, so, do reimplement minimal safety
checks to ensure we run (and free) the right timerfd callback.
Some drivers can bundle the same slot multiple times in the same input
frame. We were only correctly coalescing *consecutive* slots, but some
drivers can do that in non-consecutive sequences (e.g., 1a -> 2a -> 1b
-> 2b), so, handle that, too.
Seen on neonode v2 grids.
Make sure we always create the storage table when we add its reference
to the MTSlots list instead.
(The reasoning being we only add the reference once, and it's the first
thing we do, and we kinda need the storage to be created to get its
reference anyway; while we may set multiple keys per frame).
For realz, this time.
This reverts the original attempt, because it was gratuitous
overcomplexification that turns out to be completely unnecessary.
This also fixes a few subtle MT handling snafus on some devices.
We'll only honor one (the last one) anyway, and we've already cleared
the timers, so the others are essentially lost and stuck in limbo.
(Repro: do a series of staggered holds on different words with different
fingers in a CRe document; the one that'll "take" is the last one,
but *every* slot will be stuck in a hold state, which can essentially
semi lock you into broken input until you manage to clear the right
slots by doing duplicate multi-slot holds again...).
Multitouch gestures can create multiple timers on the same deadline, but
on different slots, so simply hoping that the head of the list would
match was somewhat optimistic... ;o).
Fix#9376
It's trickier in the !timerfd case, though,
so do the best we can there...
(It wouldn't crash, but it might fire the "wrong" callback).
It is used by CoverBrowser, in a subprocess, when extracting
metadata from PicDocuments, and crash on Android as calling
android methods is only allowed from the main thread.
This helps jumping to page when ToC chapters are short
and the bookmap page rows narrow.
Also fix crash when invoking BookMap and PageBrowser
on a PicDocument (considered DocLess by Statistics).
Includes:
- Text: fix possible overflow with "white-space: pre"
- Fonts: getFontFileNameAndFaceIndex(): return family type
- Fonts: account for _bias in Font hash
- epub.css, fb2.css: remove hardcoded monospace font names
- Fonts: allow scaling monospace fonts
- Fonts: allow adjusting fallback font sizes to x-height
- HTML parser: trust xml encoding before html charset
In our list of fonts, show a "M" indicator alongside
monospace fonts, and allow long-press to select the one
to be use for "font-family: monospace".
Add 2 options to Font settings, to scale monospace fonts
by a percentage, and to adjust fallback fonts to their
x-height.
In some versions of the /ebrmain/config/extensions.cfg file there is a
comment #ebrcfg. This will not match the regex and crashes koreader as
the table is empty.
Add a check to ensure the table is not empty while reading extensions
from the default file.
This is useful for the sysstat plugin not to have 00:00 for suspend time :)
Something similar should probably be done for the other canSuspend platforms.
This is mostly needed because opening the menu with swipe
is actually done by handling a pan south event, and so the
final swipe event is another event, that is then handled
by TouchMenu, which would straight away close itself.
Disable redundant or incompatible tweaks when enabling some.
This makes the menu more dynamic to show what's impacted,
save some re-renderings, and may avoid the user trying
combinations that would have no effect.
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
Schedule wifi keep-alive on wifi start but do not reschedule when
connection is lost. This will make sure this code is not run when
wifi is disabled again saving some battery and cpu cycles.
Commonize fullscreen code across different devices.
Add fullscreen toggle on SDL desktop targets.
Expose the toggle to the dispatcher and map it to F11.
Hide touchmenu when resizing.
(In which case we return a checkerboard pattern).
ScreenSaver: Make sure the choose image/folder/document settings
report what the code actually does on empty settings...
Add a copy button and save word context (off by default), shown
via the three-dot menu of word entries.
Also some db refactoring and minor UI improvements:
- a dedicated book title table in order to shrink db size by storing
references to title names instead of repeated actual strings,
- alignment of different forms of the "more" button and possible
clipped words in translations.
- fix plugin name so it can be disabled
This was originally designed for finer-grainbed control (specifically,
to correct by the amount of time spent in standby), but the final fix
only ever sets this to 0.
Simplify and rename (consumeInputEarlyAfterPM) to avoid useless computations.
Have the enabled/disabled state of the toggle show the
presence or not of embedded fonts in the current book.
Also show the names of the embedded fonts in the
help_text InfoMessage.
When selected text seems to be a "sentence segment"
(that is, when there are punctuations around start
AND end), extend the selection to include the relevant
punctuation.
Do this only when saving highlights and for translation
(but not when dict or wikipedia lookups, or search).
Includes:
- lvtext: fix m_kerning_mode type
- XML: let 'gb2312' (Chinese) encoding be known
- Add ldomXPointer::getChar()
- LVDocView::getNodeByPoint(): tweak for text selection
- Fonts: allow fetching the list of embedded fonts
cre.cpp:
- getTextFromPositions(): use getNodeByPoint(forTextSelection=true)
to allow panning in margins and get the nearest text instead
of nothing.
- add extendXPointersToSentenceSegment() to allow extending some
xpointer range to include punctuations at start or end (with
for now a quite rudimentory implementation).
- add getEmbeddedFontList() to allow fetching the list of
embedded fonts in the current EPUB book.
The setting is handled like all other bottom menu options
but, as it's really not useful and its target audience is
very limited, make it not shown in the bottom menu, but
available via another button in the (also quite not useful)
Word Expansion fine tuning widget.
* GestureDetector: Downgrade probeClockSource log messages to debug
We're seeing a bit more of 'em between autostandby and inhibitInput now,
and the whole thing was implemented long enough ago that it's no longer
critical to see this in random non-debug logs ;).
* Input: Reset gesture state in inhibitInput
Should prevent bogus gestures when re-enabling the handlers if we were
called in the middle of gesture detection.
Long story short: the LeaveStandby event is sent via `tickAfterNext`, so if we tear down the plugin right after calling it (in this case, that means that the very input event that wakes the device up from suspend is one that kills ReaderUI or FileManager), what's in UIManager's task queue isn't the actual function, but the anonymous nextTick wrapper constructed by `tickAfterNext` (c.f.,
https://github.com/koreader/koreader/issues/9112#issuecomment-1133999385).
Tweak `UIManager:tickAfterNext` to return a reference to said wrapper, so that we can store it and unschedule that one, too, in `AutoSuspend:onCloseWidget`.
Fix#9112 (many thanks to [@boredhominid](https://github.com/boredhominid) for his help in finding a repro for this ;)).
Re: #8638, as the extra debugging facilities (i.e., ebb81b9845) added during testing might help pinpoint the root issue for that one, too.
Also includes a minor simplification to `UIManager:_checkTasks`, and various other task queue related codepaths (e.g., `WakeupMgr`) ;).
The change from timeval to time completely broke reMarkable.
frontend/device/remarkable/device.lua was using TimeVal:now() to manually overwrite event time values, as noted in the code comments.
Input:handleTouchEv is expecting those event time values to be timevals, not integer times.
So as soon as the user touches the screen, crash.
