* Kobo: Drop a bunch of if ladder crap and switch to auto-detection of input devices via fbink_input
* Kindle: Drop an even larger bundle of crap to do the same ;p. (re: #11392)
* ExternalKeyboard: Switch to fbink_input to whitelist keyboards instead of the manual parsing of caps via its FindKeyboard class
* Input: Extended open/close wrappers to handle logging & tracking of dupe open/close calls.
* Support the Clara B&W, Clara Colour & Libra Colour
* Enable HW dithering on *all* the Kobo MTK devices
* Enforce 32bpp instead of 8bpp for Kobo devices with a color panel (the driver doesn't actually support 8bpp anyway)
* Enable standby support on MTK (whenever possible, i.e., not when plugged in, as that is horribly, horribly broken).
* Enforce the dedicated "color" waveform mode for image content in ScreenSaver, ImageViewer & Reader.
* Fix charging LED support on MTK
* Tweak the frontlight ramp on MTK + LM3630 so that it actually ramps smoothly
Device:getDefaultRoute parses /proc/net/route and converts the hex
addresses to textual IP addresses, but in `isOnline` we don't care what
address the gateway actually has, we only care about whether we have a
default route into the Internet.
This provides a simpler alternative that does the equivalent of
"ip route get 203.0.113.1 || ip route get 2001:db8::1" (note that it
does support IPv6-only connectivity as opposed to
Device:getDefaultRoute) and returns true if we have a route.
Inspired by https://github.com/pavel-odintsov/get_default_outgoing_ip_linux
Doing the `isOnline` check (`socket.dns.toip("dns.msftncsi.com")`)
without having internet connectivity (`!isConnected`) results in the
`isOnline` check never succeeding again even if connectivity is later
acquired. This is most likely caused by /etc/resolv.conf only being
parsed once - https://sourceware.org/bugzilla/show_bug.cgi?id=984, an
issue that was fixed in glibc 2.26 (PocketBook firmware U740.6.8.2461
has glibc 2.23).
This fix works around the problem by checking if we have a default route
first before even attempting to check `isOnline`. If we don't, then
`isOnline` is (almost) guaranteed to fail anyway.
We could alternatively check `isConnected` instead, but that only checks
wireless connectivity on many platforms, and we could have internet
access via USBNet instead. Checking for the default route via any
interface should work reliably for both wireless and USBNet
connectivity.
Another alternative fix is to add a fallback nameserver to
/etc/resolv.conf like we do for the Kobo platform [1]. Unfortunately,
this fix would not work in the following (rather common) scenario:
1. PocketBook boots, connects to WiFi
2. KOReader starts, /etc/resolv.conf looks all right, no fallback needed
3. PocketBook goes to sleep, disconnects from WiFi, clears resolv.conf
4. PocketBook wakes up, stays disconnected
5. KOReader user does a Wikipedia lookup, networking freezes
[1]: https://github.com/koreader/koreader/pull/6424/files#diff-be863601c59a2d6607af6b04b3be2392ec4494df6d25dae48250fae57b737f61R216-R224
Fixes: https://github.com/koreader/koreader/issues/10183
Related: https://github.com/koreader/koreader/issues/6421
Added in <https://github.com/koreader/koreader/pull/8722> and unproblematic for the past two years, but Weblate has now decided to complain about it to the extent of disabling translations:
> Error message
String contains control character: 'If some book titles, dictionary entries and such are not displayed well but shown as \ufffe\ufffe or ��, it may be necessary to download the required fonts for those languages. They can then be enabled as additional UI fallback fonts.\nFonts for many languages can be downloaded at:\n\nhttps://fonts.google.com/noto\n\nOnly fonts named "Noto Sans xyz" or "Noto Sans xyz UI" (regular, not bold nor italic, not Serif) will be available in this menu. However, bold fonts will be used if their corresponding regular fonts exist.'
Include in the EPUB stylesheet most of our epub.css
tweaks, so we get our expected styling even when
html5.css is used as the default stylesheet.
(Users liking the "web page" look can still get it
by enabling some of our existing style tweaks.)
Can be used to inspect the state of the objects in
a running KOReader.
It can also be used to execute actions (like the ones
available to associate to a gesture) with HTTP requests
from a remote computer/devices/gadgets.
The TCP server side is provided either with a new
ZeroMQ StreamMessageQueueServer (thanks bneo99),
or with a LuaSocket based SimpleTCPServer.
Minor UIManager tweak to avoid uneeded inputevent
when such a ZeroMQ module is running.
The previous check was inlined in the dir walk, so it always saw a
relative path.
Here, it gets an absolute one instead, so act accordingly ;).
Fix#11390
Regression since #11056
FrameContainer now behaves like other widgets, and no longer re-computes
dimensions in paintTo *if you provide a dimen*.
Since we do here, for.... reasons I'm not entirely sure still make any
sense, make sure we actually compute valid dimensions,
instead of an empty rect from Geom:new ;).
Fix#11389
@hius07 mentioned something to that effect a while back, makes sense.
Unlike the set of checkmarks in the dev settings, this one flips both
debug + verbose at once, *and* asks for a restart for framebuffer's
sake.
Also update the "Report a bug" spiel to request verbose debug logs.
Allow for embedding "tags" (invalid Unicode codepoints)
in the text string to trigger some text formatting:
for now only bolding some parts of text is possible.
Use it with fulltext search "all results" to highlight the
matched word (instead of the previously used brackets).
Fixes issue #8023
Related to issue #4029
The fix takes exactly the same approach as other PRs like #6195 to add some usability to devices with few hardware keys. The front-light widget can now be closed using the left key on the d-pad.
* UIManager: Init a full Geom on region-less refreshes in _refresh
* Never call refreshFull with no arguments
I got rid of the low-level nil guards, because UIManager itself guarantees that it can never happen
* Bump base (https://github.com/koreader/koreader-base/pull/1718) (fix#11303)
* Kindle: Re-enable HW dithering on the Scribe
Now that the underlying issue is fixed in base ;).
Namely, don't recompute layouts, as they do not change.
(The gyro codepaths were already doing something similar.)
* Keep ConfigDialog, FileManagerMenu & ReaderMenu open on rotation.
(In practice, only ConfigDialog is affected, as *Menu doesn't handle the rotation event.)
* Plugged an instance leak in the aforementioned Menu classes.
* Unify behavior & code with the gyro codepaths.
Something in the gettext/weblate pipeline doesn't like it...
These are real unicode codepoints, not custom nerdfont ones, so just
render the actual glyph instead of escaping it.
Fix#11328
Cf. #10845.
Simplify the code, because the bit trickery was fairly nasty to follow.
KISS: flip one value at a time, either in or out.
Actually allow flipping *all* of the things via the UI, to help track
what the hell is actually happening when you touch a button.
Make some of 'em radio to make it clear when flipping one might affect
the other(s).
Brought on by https://www.mobileread.com/forums/showthread.php?t=358166
These changes make the title bar in File manager, History and Collection windows of the same height.
The items and book covers thumbnail dimensions in Mosaic and Detailed list display modes are now equal, and up/down scaling of the thumbnails is not needed when switching between File manager, History and Collection.
Add some menu items under Screen>Rotation to allow inverting
the default rotation of ImageViewer, and to auto-rotate for
best fit on launch, so landscape images are auto-rotated to
the preferred rotation.
Fix#11164 and involves a drive-by fix:
Kindle: Send Suspend/Resume event regardless of the screen saver state
If we get the events, it means stuff happened, we can't just only honor
it in the most common workflows ;).
This effectively reverts a tiny bit of #10426 (I was sort of expecting
this to be problematic at the time, and I most likely hadn't tested it).
They'll be disabled again when the widget in question is dismissed.
This exposes a couple of semi-obvious but edge-casey footguns to the user, but a hardened implementation is way uglier. See PR for details.
Just prevent page thumbnails ImageWidgets to be nightmode
inverted, unlike all other ones which are expected to be
double inverted to get their original colors shown.
The same thumbnail can be used and cached in both day and
night modes, unless "nightmode_images" is enabled and have
crengine itself invert images, making thumbnails different.
* Bump base
includes:
koreader/koreader-base#1691koreader/koreader-base#1692koreader/koreader-base#1689koreader/koreader-base#1690koreader/koreader-base#1693
* Integrate decoding of SSIDs within wpa_supplicant
The UTF-8 decoding of SSIDs is specific to wpa_supplicant. In this
patch, we move all of this decoding logic to the wpa_supplicant module.
We expose the raw bytes of the SSID to the NetworkMgr code, and make
sure to always fix bad UTF-8 before we display the SSID to the user.
Within the wpa_supplicant module, we replace the call to the
wpa_passphrase binary to get the PSK with a direct function call to
OpenSSL. This allows us to calculate the PSK over any arbitrary bytes,
including UTF-8. In the same vein, we use the hex-encoded SSID to
communicate with wpa_supplicant when setting up the network to support
arbitrary bytes in the SSID.
Unfortunately, we also remove the tests, as there is no way to unit test
local functions.
They were only sent when said action was triggered manually.
Note that this is perfectly harmless, since, currently,
nothing actually responds to those events ;).
This option saves metadata sidecar (sdr) directories not next to the book or in koreader/docsettings/, but in koreader/hashdocsettings/ using the partial md5 hash of each documents, allowing users to move, rename, and copy their documents outside of KOReader without accidentally losing their highlights/notes/progress. Included are various warnings and info to users of the benefits and drawbacks of this non-default option.
Closes#10892.
Checkboxes under TOC>Settings> allow enabling Custom TOC
and Custom hidden flows (similar to "Hide non-linear fragments"
available with some EPUBs).
Handled by a new ReaderHandmade module.
Adding and removing TOC chapters is done in PageBrowser
with long-press on a page thumbnail, and for chapters also
in the popup dialog after selecting some text in a page.
ReaderToc: add a symbol in title when the TOC is the
alternative TOC or the custom TOC.
When enabled in BookMap, both BookMap and PageBrowser get:
- alternating gray background on chapter spans
- hatched background instead of uni-gray on hidden flows.
Also, with both normal look and this alternative theme,
show some hatched overlay on thumbnails part of hidden flows.
ReaderToc: for each TOC item, have it carry its sequence/number
in that level (we do this in validateAndFixToc() where we are
already iterating all the items).
BookMap and PageBrowser instances can be stacked; when
toggling a bookmark in a lower PageBrowser and closing it,
make sure the bookmark is shown in the BookMap we get back to.
Also consider TOC and hidden flows as a thing that can be
edited and needs refreshing, so we're ready for next commits
about custom TOC and custom hidden flows.
Also update Reader footer when closing the last BookMap
or PageBrowser.
There was no real reason for having to wait.
Also avoid possible crash when a background generated
thumbnail would be displayed after other things happened.
Instead of small markers below the baseline, use
translucent vertical lines over most of the ribbon's
height to mark thumbnail rows, so we can more easily
relate chapter spans to thumbnail rows.
When not provided, the cursor stays at its initial position,
which might not be the best if replacing the whole content,
where we would prefer to have it at start or end.
* New menu option and filemanager filter to hide finished books #7158
The default behavior is to display the finished books (no change on
upgrade). For consistency with the two similar options, it represented
by a checkbox "Show hidden books" that is checked by default.
The implementation is straightforward, meaning that, when the option is
unchecked, each file will require a call to `filemanagerutil.getStatus`
that checks its status.
For clarity, the code uses the "finished books" expression because the
condition is relevant to the *book* metadata, while the other settings
are about *file* attributes.
* Device: Add a `hasSeamlessWifiToggle` devcap to complement `hasWifiToggle`, to denote platforms where we can toggle WiFi without losing focus, as this has obvious UX impacts, and less obvious technical impacts on some of the NetworkMgr innards...
* Android: Mark as `!hasSeamlessWifiToggle`, as it requires losing focus to the system settings. Moreover, `turnOnWifi` returns *immediately* and we *still* run in the background during that time, for extra spiciness...
* NetworkMgr: Ensure only *one* call to `turnOnWifi` will actually go on when stuff gets re-scheduled by the `beforeWifiAction` framework.
* NetworkMgr: Ensure the `beforeWifiAction` framework will not re-schedule the same thing *ad vitam aeternam* if a previous connection attempt is still ongoing. (i.e., previously, on Android, if you backed out of the system settings, you entered the Benny Hill dimension, as NetworkMgr would keep throwing you back into the system settings ;p). This has a few implications on callbacks requested by subsequent connection attempts, though. Generally, we'll try to honor *explicitly interactive* callbacks, but `beforeWifiAction` stuff will be dropped (only the original cb is preserved). That's what prevents the aforementioned infinite loop, as the `beforeWifiAction` framework was based on the assumption that `turnOnWifi` somewhat guaranteed `isConnected` to be true on return, something which is only actually true on `hasWifiManager` platforms.
* NetworkMgr: In `prompt` mode, the above implies that the prompt will not even be shown for concurrent attempts, as it's otherwise extremely confusing (KOSync on Android being a prime example, as it has a pair of Suspend/Resume handlers, so the initial attempt trips those two because of the focus switch >_<").
* NetworkMgr: Don't attempt to kill wifi when aborting a connection attempt on `!hasSeamlessWifiToggle` (because, again, it'll break UX, and also because it might run at very awkward times (e.g., I managed to go back to KOReader *between* a FM/Reader switch at one point, which promptly caused `UIManager` to exit because there was nothing to show ;p).
* NetworkMgr: Don't drop the connectivity callback when `beforeWifiAction` is set to prompt and the target happens to use a connectivity check in its `turnOnWifi` implementation (e.g., on Kindle).
* Android: Add an `"ignore"` `beforeWifiAction` mode, that'll do nothing but schedule the connectivity check with its callback (with the intent being the system will eventually enable wifi on its own Soon(TM)). If you're already online, the callback will run immediately, obviously. If you followed the early discussions on this PR, this closely matches what happens on `!hasWifiToggle` platforms (as flagging Android that way was one of the possible approaches here).
* NetworkMgr: Bail out early in `goOnlineToRun` if `beforeWifiAction` isn't `"turn_on"`. Prompt cannot work there, and while ignore technically could, it would serve very little purpose given its intended use case.
* KOSync: Neuter the Resume/Suspend handlers early on `CloseDocument`, as this is how focus switches are handled on Android, and if `beforeWifiAction` is `turn_on` and you were offline at the time, we'd trip them because of the swap to system settings to enable wifi.
* KOSync: Allow `auto_sync` to be enabled regardless of the `beforeWifiAction` mode on `!hasSeamlessWifiToggle` platforms. Prompt is still a terrible idea, but given that `goOnlineToRun` now aborts early if the mode is not supported, it's less of a problem.
Move as much of the state tracking as possible inside VirtualKeyboard itself.
InputDialog unfortunately needs an internal tracking of this state because it needs to know about it *before* the VK is shown, so we have to keep a bit of duplication in there, although we do try much harder to keep everything in sync (at least at function call edges), and to keep the damage contained to, essentially, the toggle button's handler.
(Followup to #10803 & #10850)
wpa_supplicant returns all non-ASCII SSIDs as raw bytes in the form
\x0a. We interpret these bytes as UTF-8, and make sure that all invalid
characters are replaced with a �.
Fix issue introduced by 976aaf5f: with full screen
text editor and hiding the keyboard, a tap in the
text area would show a new keyboard hiding the
buttons allowing to save/close the text editor,
getting us stuck there.
Makes more sense this way.
Re: #10828
Also clarify the UIManager "no dialogs left" message, and drop the
return value, as it's meaningless, we just want to break & return.
Assume the host system does things right otherwise.
Should be sane on Kindle
On PocketBook, who knows, but assuming the device actually suspends,
that should effectively kill our keepalive
Irrelevant for Android, as we skipped it because the wifi toggling
methods are interactive.
Fix#10823
(For reference, we *enable* wifi_was_on no matter *how* wifi is enabled,
but we only toggle it off when it's killed by a *direct* user interaction,
the intent being that if *something* non-interactive enabled wifi,
you'll probably silently need it on resume too).
As early as turnOnWifi.
Implement it on hasWifiManager platforms, preventing useless
connectivity checks to run when they're obviously never going to work
because you're out of range of your AP.
Also implemented a flag to notify the backend if the connection attempt
was interactive or not.
Right now, interactive is extremely restricted, it basically means the
menu checkmark, or a gesture.
The intent being that for stuff like the beforeWifiAction framework, we
don't want the backend to spawn extra UI.
Specifically, for hasWifiManager platforms, we no longer spawn the AP
scan list on failure unless the caller was interactive.
TL;DR: beforeWifiAction is now much less obnoxious when you're obviously
not able to connect.
MultiInputDialog does a close -> show in the same callback,
so if we don't actually keep it in sync with the actual state, we lose
the keyboard and essentially softlock the UI, which is Very Bad(TM).
NOTE: InputDialog has its own keyboard_hidden flag, and it looks...
fairly nightmarish.
Re #10743
Note that this only makes faulty switches slightly less annoying: for a
stuck switch, instead of a string of page turns, you'll get a single
missed page turn on the tap that actually releases the stuck contact...
The Kindle swipe animations & physical key inversion apply *everywhere*,
so we need this accessible in the FM, too.
Move it to Navigation, which is where it already was on !Touch devices.
