* [device][kindle4] add fake event to kindle4
* modify focusmanager to allow for more complex layout
The focusmanager now naviguate the layout by avoiding nil value
instead of relying on table lenght. It should be completely backward
compatible
* add Dpad naviguation to the touchmenu
* fix crash because virtualkeyboard on non touch device
the kindle4NT has no keyboard nor touch, the fix open the virtual
keyboard so koreader dont crash but it's not useable
* Enable device with keys to use the touchmenu
* Don't get stuck in reader progress statistics plugin
* [underlinecontainer] Fix and remove unused function
References #1898.
For devices with natural light (KA1, H2O2), add new button 'Configure'
at the bottom which will open the naturallightwidget, which will be
placed at the top. The frontlightwidget will be moved to the bottom,
and both have permanent focus. This way, you can change the parameters
and immediately test them by changing the frontlight level and
warmth. On the KA1, both widgets will easily fit, but on smaller
devices it may be that they overlap.
Since the frontlightwidget will keep focus, we disable the 'Configure'
button when the naturallightwidget opens. We also remove its 'Close'
button and disable 'onTapCloseFL', so that the frontlightwidget cannot
be closed while the naturallightwidget is displayed.
This widget is used to configure the natural light on KA1/H2O2. It
allows the user to set the gain/offset values for white/red/green, as
well as the exponent used in the formula.
Numbers can be changed via screen keyboard or through the plus/minus
buttons next to the numbers (holding the buttons will in/decrase with
smaller steps). Changes are applied immediately, but will only be set
permanently if 'OK' is pressed. If 'Cancel' is pressed, the new values
are discarded and the old ones restored. Also, pressing 'OK' will save
these values in the koreader settings file (there's no support for
changing these values in Nickel, so there's nothing to sync to its
config file). The 'Restore Default' button will install the original
defaults that were derived from Nickel's behavior.
This widget is meant to be called from the frontlight widget and is
placed at the top, so that the frontlight widget can still be used to
test the current values (see next commit).
For warmth and/or brightness = 0, we need to make sure that the
red/green/white LEDs are actually turned off, regardless of the values
for gain/offset.
bump crengine:
Allow for quicker loading when interested in metadata only.
Allow for more than 65535 different attribute values.
Increase gamma values range.
Some Hold and move (hold on title and move away from it) would not work.
Pan (=swipe with hold at end) while selecting text would move the
window (it now does nothing: proper text selection still needs Hold
on word at start).
Also increase hold duration from 2s to 3s (for switching lookup
between dict/wikipedia) to be consistent with the 3s duration in
readerhighlight.
Bump crengine for cache re-use fix and warnings when
cache sizes reached.
Allow for increasing some crengine cache sizes with a new
setting: "cre_storage_size_factor" = 1.5 (or 2, or 4...)
Holding on a word for more than 3s should bring the highlight menu.
It crashed on readerpaging documents because self.hold_pos is no more
a Geom object with them.
Also inverted selected_word/selected_text logic, as with PDF, selected_word
stays set when selected_text is available.
If the device supports natural light (currently only KA1), extend the
frontlight widget to also allow for changing the 'warmth' value. We
more or less duplicate the widget for 'brightness', with the exception
that we drop the 'toggle' button, which does not make much sense for
the frontlight's warmth. Also, we add captions 'Brightness' and
'Warmth' for clarity.
New zoom configuration available among the others
Allows to easily navigate in two-column documents
In order to work properly, **scroll mode must be deactivated**
The best zoom is obtained with proper cropping around the two columns (should be the default one for content-width)
Fixes#501
With ["cre_compress_cached_data"] = false in settings.reader.lua.
Not using compression for cache files does indeed take more space,
but it does speed up opening, rendering, page turns, and closing,
with big documents.
Bump base and crengine.
ReaderLink: make all links be a table (they were a table for PDF,
but a string for CRE) for clearer code. Also have location_stack
store them as tables, with additional properties.
Get original position of link source (and verify it is valid)
so we can show a marker there.
Also:
Hold on "Go back to previous location" to clear location stack.
Resists "Swipe to go back" when previous locations stack has just
become empty, and show a notification.
Fix wrong links with Swipe to follow nearest link on PDF documents.
If the device has natural light support (currently only KA1), use the
sysfs interface instead of the ioctl-based one. It might also be
usable on other Kobo devices for setting brightness without natural
light, but since I cannot test this, this is currently restricted to
the KA1.
By default, the ioctl interface is used for accessing the
frontlight. However, the ioctl interface has two problems: the overall
brightness seems to be lower (issue #2321), and it does not support
the natural light support from the Kobo Aura One (issue #2285). This
interface is the first step to fix both these issues.
From observing Nickel's behavior, it appears the white/green/red
intensities are roughly linear dependent on the 4th root of brightness
and warmth values. This leads to a very quick increase of the
intensities for lower brightness/warmth values, which then saturate
for larger ones. The values for gain/offset were determined by a
simple linear regression, but the plan is to create a widget so that
users may adapt these values to their liking.
First item would be underlined if the device is both Touch and Keys
capable (emulator, android, pocketboot...), which is not really
pretty. Delay that till Keys for focusing are really used.
Fix various inconsitencies: some occurences not highlighted
on displayed page; different occurences highlighted on same
page wheter we went there searching backward or forward; pages
with occurences simply just skipped when searching in one
direction, and not in the other...
To avoid edge cases, crengine will now give back results on up
to 3 pages, that we need to filter.
Bump base and crengine
Also fix some bad filename and extension in epub's OEBPS/content.opf,
Store image files (jpg, png, gif) uncompressed in the .epub as they
don't need compression.
crengine may now give us multiple authors (if multiple <dc:creator>
in epub metadata) separated by \n.
Deal with that where needed.
Limit the number of authors displayed in coverbrowser views.
Bumped base/crengine: multiple <dc:creator> + fix mobi images order
Bumped base: util.runInSubProcess(): give child its own process group
When no manually added specific 'poweroff' or 'reboot' screensaver
settings, use the suspend/sleep settings set via menu with an added
overlay message in top right corner.
Generalized some settings: "White background behind message and images"
and "Stretch covers and images to fit screen", and move "Exclude this
book's cover from screensaver" up a level (and remove this menu item
added by ReaderMenu when closing document).
Don't use memory cache with rendered screensaver images.
ImageWidget: fix wrong behaviour (stretch) when 'file', 'width',
'height' and 'scale_factor' provided: now, keep aspect ratio.
ImageWidget: increase file image mem cache (mostly used for icons)
from 2 to 5MB to be ready for devices with very high DPI.
(each one at top right of each page)
Such images can be loaded dynamically when the display of a page requires it.
Allow alternating between the image and its title with Tap on it.
Allow for viewing this image zoomed in ImageViewer with Hold on it.
DictQuickLookup: add generic support for result.images, that
could optionally be provided in Wikipedia lookup results.
New TrapWidget: invisible full screen widget for catching UI events. Can
optionally display a text message at bottom left of screen (ie: "Loading..."),
used by default by Trapper:dismissable functions when no widget provided.
Added Trapper:dismissableRunInSubprocess() to run a lua function in
a sub-process, allowing it to be dismissed, and returns its return
value(s).
Configure number of items per page (from 6 to 24) - default is 14
Allow filenames to wrap so that we can see the full name
Used by File browser, History, Search Result, Bookmarks, Table of contents (only single line), File chooser, OPDS catalog
* Adds a generic HTML widget modeled after the text widget, and HTML dictionary support. HTML dictionaries can have their own CSS (for X.ifo it must be X.css). The base CSS just resets the margin and sets the font.
Note that the widget doesn't handle links, that wasn't needed for the dictionary.
Closes <https://github.com/koreader/koreader/issues/1776>.
* Show tag stripped HTML if the dictionary entry isn't valid HTML
* Simulate the normal <br/> behavior
* Bump base
in relative page turning in skim, errors appear when page number is less than 10, and you press -10 in skim it gives warning and the page doesn't change, this happens in pdf.
"update" method solves this if it comes first.
Use "message" as the default for screensaver (instead of "disable") (https://github.com/koreader/koreader/pull/3535#issuecomment-353337143)
On Kobo
Fix: display message on poweroff or reboot (https://github.com/koreader/koreader/pull/3535#issuecomment-352355865)
Allows for overwritting these default messages with the classic screensaver settings, by just prepending "poweroff_" or "reboot_" to them. (https://github.com/koreader/koreader/pull/3535#issuecomment-352498497)
So one can manually add to its settings.reader.lua:
```
"poweroff_screensaver_type" = "random_image" or "message", "cover", "bookstatus", "readingprogress", "disable",
"poweroff_screensaver_dir" = "path to same as screensaver_dir or alternate dir for poweroff image(s)",
"poweroff_screensaver_message" = "message to use instead of Powered off",
```
```
"reboot_screensaver_type" = "random_image" or "message", "cover", "bookstatus", "readingprogress", "disable",
"reboot_screensaver_dir" = "path to same as screensaver_dir or alternate dir for reboot image(s)",
"reboot_screensaver_message" = "message to use instead of Rebooting...",
```
Partial, as it will safe the state when suspending the reader by pressing the power-button.
However, it will still not safe the state when Pocketbooks autoPowerOff-Feature kicks in, as this does not create an event (e.g. no EVT_BACKGROUND) of any kind.
* Clean up device.lua
* Save state on suspend
cre:loadDocument() may fail in recognizing the document format, and
koreader would previously keep calling other methods on it, which would
make crengine segfaults. We now check loadDocument success at the
various places it is called, and try to deal the best way we can when it fails.
* Properly create intermediate directories when receiving books from Calibre.
This fixes an issue where you can't receive books except into directories that
already exist on the Kobo, which, in particular, causes problems when your
configuration in Calibre is something like "put books in $Author/$Title.epub"
and you haven't previously synced any books by that author.
* Wake up periodically to process ZMQs if any are registered.
This fixes an issue where if there are any timed events (such as the suspend
timer) in the queue, ZMQ events may not get processed until the timed event
fires, which is a problem when (for example) the suspend timer goes off in
an hour and you have something trying to send a book to the kobo over wifi
*right now*.
With this change, the event loop will wake up every 50ms to check for ZMQ
events and process them if necessary. If there are no ZMQs registered (which
is typical), it uses the original behaviour -- so this won't affect battery
life under normal usage.
- Fix links to wikipedia pages containing '?oldid=123', that
wouldn't work when used back thru the API.
- Make external links to other wikipedias with a different langage
work (they didn't work when non-ascii page titles)
- Speedup download of images by using a newly added 'fast_refresh'
option to Trapper:info() to bypass UIManager.
* Prevent open screensaver more than one in the same time
* Add option to enable/disable background in message screensaver
* fallback to random images if this book cover is excluded feature + fix Disabled (leave screen/page as it is)
* Autostretch disable by default, more fallback options, leave screen as it is
drawXPointerSavedHighlight() and onTapXPointerSavedHighlight were
looping thru all credocuments highlights, which was expensive.
Now, we first check with cheaper getPageFromXPointer() the highlights
are on the current page before doing more expensive stuff.
Closes#3503.
When looking for .ifo to populate Dictionary settings menu,
avoid walking sub-directories once we found a .ifo, as these
sub-directories may contain a lot of images and other subdirs.
This feature, introduced some days ago, was actually
doing 2 updateItems calls: the initial one, and a second
to switch to focused_file page (cheap with classic display mode,
less cheap with CoverBrowser modes).
This change allows doing that in a single call.
Also fix a few crash possibilities when unhighlighting.
Also fix bug with binary search that could not be able to remove bookmark
when there are multiple bookmarks/highlights on the same page.
To make it more alike bottom menu:
- left and right border not displayed
- line below icons extends to screen borders
- same bottom border size
And make separator lines have same padding on both sides
This is done by/for kosync plugin at each opening, because
the docsettings was re-opened and saved for this, but later
overwritten by the current koreader docsettings - so it was
redone each time. This correctly adds this partial_md5_checksum
to the current koreader docsettings, which will be saved on
document closing - so it will not be redone next time.
Note: this partial_md5_checksum is not (yet) used by anything.
When going from reader to filemanager, we are in the directory
containing the last_file. With this, we will also be on the page
showing this file.
When in filemanager and going up (".."), we will also be on the
page containing the directory we came from.
Rationalize horizontal construction of Menu items (TOC,
Bookmarks, Classic file views) for more even padding.
Align "x" close button diagonaly with top right border and title.
Also add forgotten scale_for_dpi to MultiConfirmBox
This makes Go to, Skim to and TOC page selection work in
scroll mode, and page given to other module more accurate
(previously, we were one action lagging).
This makes button heights similar in all uses of ButtonTable.
It depended on how the ButtonTable was used in each widget
(previously, first and last row may have different sizes than
the others).
buttontable.lua: more even buttons height whether zero_sep or not
framecontainer.lua: added padding_top/bottom/left/right (similar to
what was done for iconbutton)
The following widgets have been adapted for this, with some
additional fixes:
buttondialog.lua
buttondialogtitle.lua: wider title with adequate padding
confirmbox.lua + multiconfirmbox.lua: dismissable via tap outside
inputdialog.lua + multiinputdialog.lua: more even vertical padding between elements
imageviewer.lua
textviewer.lua
datewidget.lua
timewidget.lua
Additionaly: frontlightwidget.lua: fixed width of progress bar that
was exceeding window width since the Size scaling adjustements
Decide baseline vertical position according to font metrics, instead
of the hardcoded 0.7 (in textwidget, which made the text a little
bit up in its box), and 0.75 (in toggleswitch, which made the text a
little bit down in its box). This usually gives a value around 0.72
or 0.73 with our ui fonts, which looks about right.
ReaderFooter: add bottom padding, now that our text goes a few pixels lower
I believe this should be `if isKobo()`, or better yet that the entire
block should be moved to `KoboPowerD:init()` because afaik that is the
only platform where the system doesn't provide trustworthy frontlight
information. But to be absolutely sure that I don't break anything (and I
don't want to spend any time on this atm) I'm temporarily excluding only
Android where this behavior is known to be problematic.
See discussion in https://github.com/koreader/koreader/issues/3118#issuecomment-334995879
References #3118 (using keyword "references" because phrases like "possibly fixes"
result in GH autoclose).
"partial" refresh causes a full (without black flash) refresh on
Kindle (which uses REAGL mode for partial refresh). This causes a
full redraw of widgets, which is a bit distracting with some of them:
- dictquicklookup: when showing next definition
- infomessage: when displaying a new one (Wikipedia Save as epub)
Also fix bottom menu, that even when closed, would still register
bottom area as dirty: this would cause top menu navigation to
cause a full partial refresh, only noticable on Kindle.
* Fix crash with keyboard navigation of onHold buttontables
Would crash when encountering a separator or when the number
of buttons in a row changes.
* Reset previous selected item on new buttontable
This gives the page position to these modules even in scroll mode.
Also, in readerrolling: don't query battery/charging status
when crengine does not need it (used only when it shows its top
progress bar).
394be8a (#2855) and 2b3b310 (#3183) introduced side effects (scroll mode
crashing and TOC being reset and rebuild). This reverts parts of them
not yet reverted.
Avoid unnecessary work in ReaderView:onSetViewMode() and
ReaderRolling:updatePos() that would result in TOC being reset
and rebuilt (which can take time on books with huge TOC) during
reader setup.
* Allow for colored rendering
Available with all engines (CRE, PDF, Images).
Needs to manually add setting: "color_rendering" = true
* Disable color for djvudocument
* Use Screen:isColorEnabled()
* Bump base
For years they've been smaller on higher DPI devices and likely very few people realized it was technically a bug. These values round up on lower DPI and smaller screen devices.
References https://github.com/koreader/koreader/issues/3265
Closes: #3236 and #3235
Details:
> Also, when looking in days, we see info how many hours we read. It would be great if we could tap a day, it opens info on book(s) we read that day with info pertaining to that day, and if we tap on book, we receive book info for that book.
> Statistics plugin is really great, I started to look in my reading statistics now much more, but all the time I can go only in one way. And I need to exit at lowest level of info. It would be great if I can use statistics plugin like part of menu, to go up and down within statistics data and exit at my wish, not when I have to.
Also added:
* new statistics book by week
* new statistics book by month
* last year by week now we can see days in selected week
* Cache scaled images with scale_for_dpi
* Don't update original self.scale_for_dpi
A same ImageWidget object can be free()'d and re-render()ed,
and we would then lose scale_for_dpi on next renderings
onde2rock
anarcat
Frans de Jonge
David Engster
poire-z
cairnsh
mwoz123
FranMarelli
Robert
Hzj_jie
TnS-hun
Mahmoud Nagy
Fabian Müller-Knapp
Ben Kelly
Huang Xin