input-remapper/readme/usage.md

Usage

To open the UI to modify the mappings, look into your applications menu and search for 'Key Mapper'. You should be prompted for your sudo password as special permissions are needed to read events from /dev/input/ files. You can also start it via sudo key-mapper-gtk.

Hitting a key on the device that is selected in the large dropdown on the top should display the key on the bottom of the window, and write it into the selected row (as shown in the screenshots).

For changes to take effect, save the preset first. Otherwise, the daemon won't be able to know about your changes. Afterwards press the "Apply" button.

To change the mapping, you need to use the "Restore Defaults" button, so that the application can read the original keycode. It would otherwise be invisible since the daemon maps it independently of the GUI.

Troubleshooting

If stuff doesn't work, check the output of sudo key-mapper-gtk -d and feel free to open up an issue here. Make sure to not post any debug logs that were generated while you entered private information with your device. Debug logs are quite verbose.

If injecting stops after closing the window, the service is not running. Try sudo systemctl start key-mapper in a terminal.

Combinations

Select the key in your row (click here) and hold a few buttons down. Releasing them will make your text cursor jump into the mapping column to type in what you want to map it to.

Combinations involving Ctrl might not work, I think the desktop environment grabs them or something. Combinations with Shift might not work the way you would expect. If it outputs the keycode for a, you are going to get an 'A', because X11 still sees the enabled shift button.

This happens, because all key-mapper does is either forwarding or mapping your keycodes (which is easier said than done), and X11/Wayland has to decide what to do with it. And it decides, that if shift is pressed down, it will capitalize your stuff.

A better option for a key combination would be KP1 + a instead of LEFTSHIFT + a, because there won't be any side effect. You can disable KP1 by mapping it to disable, so you won't trigger writing a "1" into your focused application.

Macros

It is possible to write timed macros into the center column:

• k(1).k(2) 1, 2
• r(3, k(a).w(500)) a, a, a with 500ms pause
• m(Control_L, k(a).k(x)) CTRL + a, CTRL + x
• k(1).h(k(2)).k(3) writes 1 2 2 ... 2 2 3 while the key is pressed

Documentation:

• r repeats the execution of the second parameter
• w waits in milliseconds
• k writes a single keystroke
• m holds a modifier while executing the second parameter
• h executes the parameter as long as the key is pressed down
• . executes two actions behind each other

Syntax errors are shown in the UI on save. Each k function adds a short delay of 10ms between key-down, key-up and at the end. See Configuration Files for more info.

Bear in mind that anti-cheat software might detect macros in games.

Key Names

Check the autocompletion of the GUI for possible values. You can also obtain a complete list of possiblities using key-mapper-control --key-names. Examples:

• Alphanumeric a to z and 0 to 9
• Modifiers Alt_L Control_L Control_R Shift_L Shift_R
• Mouse buttons BTN_LEFT BTN_RIGHT BTN_MIDDLE BTN_SIDE ...
• Multimedia keys KEY_NEXTSONG KEY_PLAYPAUSE ...

Gamepads

Joystick movements will be translated to mouse movements, while the second joystick acts as a mouse wheel. You can swap this in the user interface. All buttons, triggers and D-Pads can be mapped to keycodes and macros.

The D-Pad can be mapped to W, A, S, D for example, to run around in games, while the joystick turns the view (depending on the game).

Tested with the XBOX 360 Gamepad. On Ubuntu, gamepads worked better in Wayland than with X11 for me.

Configuration Files

The default configuration is stored at ~/.config/key-mapper/config.json. The current default configuration as of 0.6.0 looks like, with an example autoload entry:

{
    "autoload": {
        "Logitech USB Keyboard": "preset name"
    },
    "macros": {
        "keystroke_sleep_ms": 10
    },
    "gamepad": {
        "joystick": {
            "non_linearity": 4,
            "pointer_speed": 80,
            "left_purpose": "mouse",
            "right_purpose": "wheel",
            "x_scroll_speed": 2,
            "y_scroll_speed": 0.5
        }
    }
}

preset name refers to ~/.config/key-mapper/presets/device name/preset name.json. The device name can be found with sudo key-mapper-control --list-devices.

Anything that is relevant to presets can be overwritten in them as well. Here is an example configuration for preset "a" for the "gamepad" device: ~/.config/key-mapper/presets/gamepad/a.json

{
    "macros": {
        "keystroke_sleep_ms": 100
    },
    "mapping": {
        "1,315,1+1,16,-1": "1",
        "1,307,1": "k(2).k(3)"
    }
}

Both need to be valid json files, otherwise the parser refuses to work. This preset maps the EV_KEY down event with code 307 to a macro and sets the time between injected events of macros to 100 ms. The other mapping is a key combination, chained using +.

Note that a complete keystroke consists of two events: down and up. Other than that, it inherits all configurations from ~/.config/key-mapper/config.json. If config.json is missing some stuff, it will query the hardcoded default values.

The event codes can be read using evtest. Available names in the mapping can be listed with key-mapper-control --key-names.

CLI

key-mapper-control

--command requires the service to be running. You can start it via systemctl start key-mapper or sudo key-mapper-service if it isn't already running (or without sudo if your user has the appropriate permissions).

key-mapper-control --command autoload
key-mapper-control --command autoload --config-dir "/home/user/.config/key-mapper/"
sudo key-mapper-control --list-devices
key-mapper-control --command stop --device "Razer Razer Naga Trinity"
key-mapper-control --command start --device "Razer Razer Naga Trinity" --preset "~/.config/key-mapper/presets/gamepad/a.json"

systemctl

Stopping the service will stop all injections until the computer is rebooted.

sudo systemctl stop key-mapper
sudo systemctl start key-mapper
systemctl status key-mapper

Testing your Installation

The following commands can be used to make sure it works:

sudo key-mapper-service &
key-mapper-control --command hello

should print Daemon answered with "hello". And

sudo key-mapper-control --list-devices

should print Found "...", .... If anything looks wrong, feel free to create an issue.