mirror of
https://github.com/PurpleI2P/i2pd.git
synced 2024-11-02 09:40:18 +00:00
110 lines
4.6 KiB
Markdown
110 lines
4.6 KiB
Markdown
i2pd configuration
|
|
==================
|
|
|
|
Command line options
|
|
--------------------
|
|
|
|
* --conf= - Config file (default: ~/.i2pd/i2p.conf or /var/lib/i2pd/i2p.conf)
|
|
This parameter will be silently ignored if the specified config file does not exist.
|
|
Options specified on the command line take precedence over those in the config file.
|
|
* --tunconf= - Tunnels config file (default: ~/.i2pd/tunnels.cfg or /var/lib/i2pd/tunnels.cfg)
|
|
* --pidfile= - Where to write pidfile (dont write by default)
|
|
* --log= - Logs destination: stdout, file (stdout if not set, file - otherwise, for compatibility)
|
|
* --logfile= - Path to logfile (default - autodetect)
|
|
* --loglevel= - Log messages above this level (debug, *info, warn, error)
|
|
* --host= - The external IP
|
|
* --port= - The port to listen on
|
|
* --daemon - Router will go to background after start
|
|
* --service - Router will use system folders like '/var/lib/i2pd'
|
|
* --ipv6 - Enable communication through ipv6
|
|
* --notransit - Router will not accept transit tunnels at startup
|
|
* --floodfill - Router will be floodfill
|
|
* --bandwidth= - L if bandwidth is limited to 32Kbs/sec, O - to 256Kbs/sec, P - unlimited
|
|
* --svcctl= - Windows service management (--svcctl="install" or --svcctl="remove")
|
|
|
|
* --http.address= - The address to listen on (HTTP server)
|
|
* --http.port= - The port to listen on (HTTP server)
|
|
|
|
* --httpproxy.address= - The address to listen on (HTTP Proxy)
|
|
* --httpproxy.port= - The port to listen on (HTTP Proxy) 4446 by default
|
|
* --httpproxy.keys= - optional keys file for proxy local destination (both HTTP and SOCKS)
|
|
|
|
* --socksproxy.address= - The address to listen on (SOCKS Proxy)
|
|
* --socksproxy.port= - The port to listen on (SOCKS Proxy). 4447 by default
|
|
* --socksproxy.keys= - optional keys file for proxy local destination (both HTTP and SOCKS)
|
|
* --socksproxy.outproxy= - Address of outproxy. requests outside i2p will go there
|
|
* --socksproxy.outproxyport= - Outproxy remote port
|
|
|
|
* --sam.address= - The address to listen on (SAM bridge)
|
|
* --sam.port= - Port of SAM bridge. Usually 7656. SAM is off if not specified
|
|
|
|
* --bob.address= - The address to listen on (BOB command channel)
|
|
* --bob.port= - Port of BOB command channel. Usually 2827. BOB is off if not specified
|
|
|
|
* --i2pcontrol.address= - The address to listen on (I2P control service)
|
|
* --i2pcontrol.port= - Port of I2P control service. Usually 7650. I2PControl is off if not specified
|
|
|
|
Config files
|
|
------------
|
|
|
|
INI-like, syntax is the following : <key> = <value>.
|
|
Comments are "#", not ";" as you may expect. See [boost ticket](https://svn.boost.org/trac/boost/ticket/808)
|
|
All command-line parameters are allowed as keys, but note for those which contains dot (.).
|
|
|
|
For example:
|
|
|
|
i2p.conf:
|
|
|
|
# comment
|
|
log = yes
|
|
ipv6 = yes
|
|
# settings for specific module
|
|
[httpproxy]
|
|
port = 4444
|
|
# ^^ this will be --httproxy.port= in cmdline
|
|
# another one
|
|
[sam]
|
|
enabled = yes
|
|
|
|
tunnels.cfg (filename of this config is subject of change):
|
|
|
|
# outgoing tunnel sample, to remote service
|
|
# mandatory parameters:
|
|
# * type -- always "client"
|
|
# * port -- local port to listen to
|
|
# * destination -- i2p hostname
|
|
# optional parameters (may be omitted)
|
|
# * keys -- our identity, if unset, will be generated on every startup,
|
|
# if set and file missing, keys will be generated and placed to this file
|
|
# * address -- local interface to bind
|
|
# * signaturetype -- signature type for new destination. 0,1 or 7
|
|
[IRC]
|
|
type = client
|
|
address = 127.0.0.1
|
|
port = 6668
|
|
destination = irc.postman.i2p
|
|
keys = irc-keys.dat
|
|
#
|
|
# incoming tunnel sample, for local service
|
|
# mandatory parameters:
|
|
# * type -- "server" or "http"
|
|
# * host -- ip address of our service
|
|
# * port -- port of our service
|
|
# * keys -- file with LeaseSet of address in i2p
|
|
# optional parameters (may be omitted)
|
|
# * inport -- optional, i2p service port, if unset - the same as 'port'
|
|
# * accesslist -- comma-separated list of i2p addresses, allowed to connect
|
|
# every address is b32 without '.b32.i2p' part
|
|
[LOCALSITE]
|
|
type = http
|
|
host = 127.0.0.1
|
|
port = 80
|
|
keys = site-keys.dat
|
|
[IRC-SERVER]
|
|
type = server
|
|
host = 127.0.0.1
|
|
port = 6667
|
|
keys = irc.dat
|
|
|
|
Also see [this page](https://github.com/PurpleI2P/i2pd/wiki/tunnels.cfg) for more tunnel examples.
|