mirror of
https://github.com/ThomasToka/MarlinFirmware.git
synced 2024-11-14 18:12:52 +00:00
99 lines
4.1 KiB
Markdown
99 lines
4.1 KiB
Markdown
Marlin 2.1.x [MARLIN-E3S1PROFORK-BYTT]
|
|
|
|
This firmware is open source and based Marlin Firmware and the Creality Ender 3 S1 PRO source code.
|
|
|
|
Additional changes and additions were made by Thomas Toka.
|
|
|
|
Features Ender 3 S1 Pro:
|
|
|
|
- bed size (235mmx235mm)
|
|
- printing height 270
|
|
- correct homeing offsets
|
|
- correct nozzle to probe offsets
|
|
- z-offset set to 0.0 in order calibrate for your printer
|
|
- babystepping while printing fixed and set to 0.01mm steps
|
|
- babystepping on leveling page fixed and set to 0.01mm steps
|
|
- linear advance set to 0.05
|
|
- input shaping activated and set to x 40hz and y 40hz.
|
|
- increased buffers for faster octoprint and sd communication
|
|
- increased feedrates in reasonable borders for faster printing
|
|
- increased min_segmenttime for better quality
|
|
- unified bedleveling with a 5x5, 7x7, 10x10 mesh
|
|
- bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
|
|
- probing margin bumped to 45mm to get a square mesh
|
|
- no preheat before leveling, set what you want for that before leveling.
|
|
- pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
|
|
- fixed manual bed leveling point 1 from x=117 to x=117.5 and y=117 to y=117.5
|
|
- fixed filament runount sensor resume not functional
|
|
- fixed sd print pause resume not functional
|
|
- fixed prusa sclicer M600 functionality
|
|
- fixed octoprint print progress
|
|
- laser functionality enabled
|
|
- included relevant marlin upstream fixes
|
|
- firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
|
|
- firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
|
|
- firmware complete rebased on Marlin 2.1.x-bugfix
|
|
- M117 set lcd message supported
|
|
- M851 and M290 changes force update of zoffset on screen
|
|
- z-offset to host notification
|
|
- restore bedleveling after G28
|
|
- M48 probe repeatability test
|
|
- extruder minimum temperature lowered to 170C
|
|
- heatbreak fan extruder minimum temperature set to 80C
|
|
- bltouch high speed mode enabled on 5x5 and 7x7 builds
|
|
- G26 mesh validation
|
|
- G12 clean the nozzle
|
|
- include adc values when reporting temperature
|
|
- emergency parser
|
|
- auto report position
|
|
- host action commands
|
|
- host prompt support enabled
|
|
- M486 cancel objects
|
|
|
|
|
|
Features Ender 3 S1 Plus:
|
|
|
|
- bed size (315mmx310mm)
|
|
- printing height 300
|
|
- correct homeing offsets
|
|
- correct nozzle to probe offsets
|
|
- z-offset set to 0.0 in order calibrate for your printer
|
|
- babystepping while printing fixed and set to 0.01mm steps
|
|
- babystepping on leveling page fixed and set to 0.01mm steps
|
|
- linear advance set to 0.05
|
|
- input shaping activated and set to x 40hz and y 40hz.
|
|
- increased buffers for faster octoprint and sd communication
|
|
- increased feedrates in reasonable borders for faster printing
|
|
- increased min_segmenttime for better quality
|
|
- unified bedleveling with a 5x5, 7x7, 10x10 mesh
|
|
- bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
|
|
- probing margin bumped to 55mm to get a square mesh
|
|
- no preheat before leveling, set what you want for that before leveling.
|
|
- pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
|
|
- fixed manual bed leveling point 1 from x=157 to x=157.5
|
|
- fixed filament runount sensor resume not functional
|
|
- fixed sd print pause resume not functional
|
|
- fixed prusa sclicer M600 functionality
|
|
- fixed octoprint print progress
|
|
- laser functionality enabled
|
|
- included relevant marlin upstream fixes
|
|
- firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
|
|
- firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
|
|
- firmware complete rebased on Marlin 2.1.x-bugfix
|
|
- M117 set lcd message supported
|
|
- M851 and M290 changes force update of zoffset on screen
|
|
- z-offset to host notification
|
|
- restore bedleveling after G28
|
|
- M48 probe repeatability test
|
|
- extruder minimum temperature lowered to 170C
|
|
- heatbreak fan extruder minimum temperature set to 80C
|
|
- bltouch high speed mode enabled on 5x5 and 7x7 builds
|
|
- G26 mesh validation
|
|
- G12 clean the nozzle
|
|
- include adc values when reporting temperature
|
|
- emergency parser
|
|
- auto report position
|
|
- host action commands
|
|
- host prompt support enabled
|
|
- M486 cancel objects
|