mirror of
https://github.com/ThomasToka/MarlinFirmware.git
synced 2024-11-18 09:28:31 +00:00
36 lines
1.7 KiB
Markdown
36 lines
1.7 KiB
Markdown
# MarlinFirmware
|
|
Personal tweaks and builds of marlin 3d printer firmware repositories.
|
|
|
|
Source code is here: https://github.com/ThomasToka/MarlinbySynman/tree/bugfix-2.1.x-tweakedbyThomasToka
|
|
|
|
-------------------------------------------------------------------------------------------------------------------
|
|
My instructions for firmware installations are:
|
|
|
|
- level your bed with old firmware
|
|
- note your z-offset ex. -1.74mm
|
|
- flash new firmware
|
|
- connect with pronterface or other terminal to your printer and issue:
|
|
- M502 ; factory reset
|
|
- M851 Z-1.74 ; set your z-offset
|
|
- M500 ; save configuration
|
|
- M503 ; check if your z-offset matches
|
|
- G28 ; home your printer
|
|
- on the touch start autoleveling (there is no need to do the points if your bed was level before..)
|
|
- after autoleveling your are ready to print.
|
|
-------------------------------------------------------------------------------------------------------------------
|
|
Update 08.02.2023 10:42 CET:
|
|
|
|
It seems there is bug when pushing touch display fast at initial z-offset configuration via touch screen.
|
|
I opened a bug with the builder of this wonderfull peace of software.
|
|
https://github.com/synman/Ender-3-S1-Pro-Firmware/issues/20
|
|
|
|
Update 09.02.2023 10:11 CET:
|
|
|
|
The touch screen babystepping fast pushing bug has been adressed and (hopefully) fixed. Updated binaries have been uploaded.
|
|
Feedback welcome.
|
|
-------------------------------------------------------------------------------------------------------------------
|
|
|
|
Be carefully with your printer. Mine works fine. But this is a new build. So have your fingers near the power button when lowering your z-axis and starting print for the first time.
|
|
|
|
Please open an issue if there is something wrong.
|