FEATURES.md
parent
23e7001424
commit
2221998802
@ -0,0 +1,98 @@
|
|||||||
|
Marlin 2.1.x [MARLIN-E3S1PROFORK-BYTT]
|
||||||
|
|
||||||
|
This firmware is open source and based Marlin Firmware and the Creality Ender 3 S1 PRO source code.
|
||||||
|
|
||||||
|
Additional changes were made by Thomas Toka.
|
||||||
|
|
||||||
|
Features Ender 3 S1 Pro:
|
||||||
|
|
||||||
|
- bed size (235mmx235mm)
|
||||||
|
- printing height 270
|
||||||
|
- correct homeing offsets
|
||||||
|
- correct nozzle to probe offsets
|
||||||
|
- z-offset set to 0.0 in order calibrate for your printer
|
||||||
|
- babystepping while printing fixed and set to 0.01mm steps
|
||||||
|
- babystepping on leveleing page fixed and set to 0.01mm steps
|
||||||
|
- linear advance set to 0.05
|
||||||
|
- input shaping activated and set to x 40hz and y 40hz.
|
||||||
|
- increased buffers for faster octorprint and sd communication
|
||||||
|
- increased feedrates in reasonable borders for faster printing
|
||||||
|
- increased min_segmenttime for better quality
|
||||||
|
- unified bedleveling with a 5x5, 7x7, 10x10 mesh
|
||||||
|
- bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
|
||||||
|
- probing margin bumped to 45mm to get a square mesh
|
||||||
|
- no preheat before leveling, set what you want for that before leveling.
|
||||||
|
- pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
|
||||||
|
- fixed manual bed leveling point 1 from x=117 to y=117 to x=117.5 to y=117.5
|
||||||
|
- fixed filament runount sensor resume not functional
|
||||||
|
- fixed sd print pause resume not functional
|
||||||
|
- fixed prusa sclicer M600 functionality
|
||||||
|
- fixed octorprint print progress
|
||||||
|
- laser functionality enabled
|
||||||
|
- included relevant marlin upstream fixes
|
||||||
|
- firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
|
||||||
|
- firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
|
||||||
|
- firmware complete rebased on Marlin 2.1.x-bugfix
|
||||||
|
- 117 Set LCD Message supported
|
||||||
|
- M851 and M290 changes force update of zoffset on screen
|
||||||
|
- z-offset to host notification
|
||||||
|
- restore bedleveling after G28
|
||||||
|
- M48 probe repeatability test
|
||||||
|
- extruder minimum temperature lowered to 170C
|
||||||
|
- heatbreak fan extruder minimum temperature set to 80C
|
||||||
|
- bltouch high speed mode enabled on 5x5 and 7x7 builds
|
||||||
|
- G26 mesh validation
|
||||||
|
- G12 clean the nozzle
|
||||||
|
- Include ADC values when reporting temperature
|
||||||
|
- Emergency Parser
|
||||||
|
- Auto Report Position
|
||||||
|
- host action commands
|
||||||
|
- host prompt support enabled
|
||||||
|
- M486 cancel objects
|
||||||
|
|
||||||
|
|
||||||
|
Features Ender 3 S1 Plus:
|
||||||
|
|
||||||
|
- bed size (315mmx310mm)
|
||||||
|
- printing height 300
|
||||||
|
- correct homeing offsets
|
||||||
|
- correct nozzle to probe offsets
|
||||||
|
- z-offset set to 0.0 in order calibrate for your printer
|
||||||
|
- babystepping while printing fixed and set to 0.01mm steps
|
||||||
|
- babystepping on leveleing page fixed and set to 0.01mm steps
|
||||||
|
- linear advance set to 0.05
|
||||||
|
- input shaping activated and set to x 40hz and y 40hz.
|
||||||
|
- increased buffers for faster octorprint and sd communication
|
||||||
|
- increased feedrates in reasonable borders for faster printing
|
||||||
|
- increased min_segmenttime for better quality
|
||||||
|
- unified bedleveling with a 5x5, 7x7, 10x10 mesh
|
||||||
|
- bilinear bedleveling with a 5x5, 7x7, 10x10 mesh
|
||||||
|
- probing margin bumped to 55mm to get a square mesh
|
||||||
|
- no preheat before leveling, set what you want for that before leveling.
|
||||||
|
- pidtemp and piditemp set to values of my runs with stock bed, but calibrate for your printer please
|
||||||
|
- fixed manual bed leveling point 1 from x=117 to y=117 to x=117.5 to y=117.5
|
||||||
|
- fixed filament runount sensor resume not functional
|
||||||
|
- fixed sd print pause resume not functional
|
||||||
|
- fixed prusa sclicer M600 functionality
|
||||||
|
- fixed octorprint print progress
|
||||||
|
- laser functionality enabled
|
||||||
|
- included relevant marlin upstream fixes
|
||||||
|
- firmware supports folders and subfolders - max 8 chars for a folder name, if longer it will not be entered
|
||||||
|
- firmware supports 5 folders/files per site, print key is "cdup" if your are in a subfolder
|
||||||
|
- firmware complete rebased on Marlin 2.1.x-bugfix
|
||||||
|
- 117 Set LCD Message supported
|
||||||
|
- M851 and M290 changes force update of zoffset on screen
|
||||||
|
- z-offset to host notification
|
||||||
|
- restore bedleveling after G28
|
||||||
|
- M48 probe repeatability test
|
||||||
|
- extruder minimum temperature lowered to 170C
|
||||||
|
- heatbreak fan extruder minimum temperature set to 80C
|
||||||
|
- bltouch high speed mode enabled on 5x5 and 7x7 builds
|
||||||
|
- G26 mesh validation
|
||||||
|
- G12 clean the nozzle
|
||||||
|
- Include ADC values when reporting temperature
|
||||||
|
- Emergency Parser
|
||||||
|
- Auto Report Position
|
||||||
|
- host action commands
|
||||||
|
- host prompt support enabled
|
||||||
|
- M486 cancel objects
|
Loading…
Reference in New Issue