This release is another service release. During my development i have found a bug in the saving of the mesh to the eeprom. So it is lost after reboot of the printer.
This service release correts this.
Added
-nothing
Changed
-nothing
Fixed
[MARLIN-E3S1PROFORK-BYTT-fix8] Mesh save after G29 was faulty and not saved.
Users of the beta screen firmware can also install this build. My new developments are transparent and not interfering with the stock screen firmware. So if you use the stock screen you dont see my new developments.
I had to disable the LASER FEATURE temporary. We are running out of memory and most users dont use it. Maybe it will come back later..
In this release i also fixed the M600 repeating bug. Now it is possible to do multiple M600 as the variables are reset correctly.
This is a short service release covering only one problem as i am mid development of the new touchscreen and mainboard firmware.
In this release i fixed zoffset setting on the auxl. lvl. page. It was damaged due to a new introduced logic depending on internal signals. But those signals were not consistent in all ranges. So i reverted to my earlier logic.
### Added
- nothing
### Changed
- [MARLIN-E3S1PROFORK-BYTT-change11] CHANGE PENDING! WAITING FOR CONFIRMATION FROM UPSTREAM! I am evaluating the fix of M206. It seems broken after upstream commits.
### Fixed
- [MARLIN-E3S1PROFORK-BYTT-fix6] Auxl. lvl. zoffset adjusting stopped at -2.08mm. Fixed.
In this release today i again fixed the filament runout sensor. Me myself fatfingered it on the last rebase and so my initial fix was not implemented. Sorry.
I also adjusted the manual leveling points of the Ender 3 S1 Plus. I am not 100% satisfied with it. Further changes will follow. Problematic on this machine is the locked screen firmware to x=300 and y=300. We will see how it works with this release.
### Added
- [MARLIN-E3S1PROFORK-BYTT-add6] I included all marlin upstream commits since the last release.
- [MARLIN-E3S1PROFORK-BYTT-change11] CHANGE PENDING! WAITING FOR CONFIRMATION FROM UPSTREAM! I am evaluating the fix of M206. It seems broken after upstream commits.
- [MARLIN-E3S1PROFORK-BYTT-fix5] Users report that filament runout sensor is broken again. I can confir that i fatfingered it myself on the last rebase of the code. Fixed again. Sorry.
This release mainly covers UBL functionality. The mesh area has been extended and the manual leveling points changed to match the new location of the autoleveling points. it has still 45 mm clearance on the back as the probe can not reach much more (probe offset exactly. so 45mm is 3.2mm near to this and ok to have some clearance.)
### Added
- [MARLIN-E3S1PROFORK-BYTT-add4] I included all marlin upstream commits since the last release.
### Changed
- [MARLIN-E3S1PROFORK-BYTT-change8] The display will show which version is installed exactly (abl5x5-byTT,ubl5x5-byTT, etc..).
- [MARLIN-E3S1PROFORK-BYTT-change9] Change all UBL builds to new coordinates. Accordingly the manual leveling points will be adjusted to match the autoleveling points. Change is from 45mm mesh_inset all around to. 27mm for left (EDIT: Added 2mm for cable clearance), right and front and 45 mm for the back as the probe cant reach more. Movement area extended with +6 on X.
- [MARLIN-E3S1PROFORK-BYTT-change4] Ender 3S1 Pro build top z limit from 250mm to 270mm.
- [MARLIN-E3S1PROFORK-BYTT-change5] Sd cardreader shows 5 pages/files per page not 4 like the stock or other firmwares
- [MARLIN-E3S1PROFORK-BYTT-change6] Complete code rebase on Marlin bugfix-2.1.x and the initial port by Synman.
- [MARLIN-E3S1PROFORK-BYTT-change7] Name change of the fork from [MARLIN-E3S1FORK-BYTT] to [MARLIN-E3S1PROFORK-BYTT] in order to make clear that this is not a professional firmware clone.
- [MARLIN-E3S1PROFORK-BYTT-change3] The S1 non Pro/Plus version has been rebased on the actual Marlin bufix-2.1.x as there is no toch class needed and it is easier to maintain a recent marlin for the DWIN_CREALITY_LCD. Laser support vanished out of this version for now. Maybe i will include it sometime.
- [MARLIN-E3S1PROFORK-BYTT-change2] I changed the behavior of the "print" button for the folders and subfolders. Now the print button enters the sd card on first click, and when you are in a folder or subfolder you can go one folder up with the "print" button. Real navigation.
- [MARLIN-E3S1PROFORK-BYTT-change1] Buffers reduced as they are not needed so high and sometimes lower buffers (faster reaction of the printer) are better.