Pre [MARLIN-E3S1PROFORK-BYTT-4] release cleanup

Changelog.md

@@ -6,12 +6,17 @@ The initial port of the Creality lcd_rts.cpp was made by Synman.
 
 After this i forked Synmans repository and created my own fork.
 
+On April 1st 2023 i began porting the needed changes to a actual Marlin bugfix-2.1.x in order to have
+my own ported version.
+
+As of the release of [MARLIN-E3S1PROFORK-BYTT-4] this port is made by me.
+
 All notable changes to this project will be documented in this file.
 
 I hope you like my work.
 
 
-## [MARLIN-E3S1FORK-BYTT-4-UNRELEASED] - 2023-04-?? (Preview of the next bugfix release)
+## [MARLIN-E3S1PROFORK-BYTT-4-UNRELEASED] - 2023-04-?? (Preview of the next bugfix release)
 
 This is a sneak preview of the comming updates. I will edit this file frequently..
 
@@ -29,48 +34,49 @@ I have taken the original Creality files and upgraded/updated those to match wit
 
  
 ### Added
-- [MARLIN-E3S1FORK-BYTT-add4] I will include recent marlin commits if they make sense.
+- [MARLIN-E3S1PROFORK-BYTT-add4] I will include recent marlin commits if they make sense.
 
 ### Changed
-- [MARLIN-E3S1FORK-BYTT-change4] Ender 3S1 Pro build top z limit from 250mm to 270mm.
-- [MARLIN-E3S1FORK-BYTT-change5] Sd cardreader shows 5 pages/files per page not 4 like the stock or other firmwares
-- [MARLIN-E3S1FORK-BYTT-change6] Complete code rebase on Marlin bugfix-2.1.x and the initial port by Synman.
+- [MARLIN-E3S1PROFORK-BYTT-change4] Ender 3S1 Pro build top z limit from 250mm to 270mm.
+- [MARLIN-E3S1PROFORK-BYTT-change5] Sd cardreader shows 5 pages/files per page not 4 like the stock or other firmwares
+- [MARLIN-E3S1PROFORK-BYTT-change6] Complete code rebase on Marlin bugfix-2.1.x and the initial port by Synman.
+- [MARLIN-E3S1PROFORK-BYTT-change7] Name change of the fork from [MARLIN-E3S1FORK-BYTT] to [MARLIN-E3S1PROFORK-BYTT] in order to make clear that this is not a professional firmware clone.
 
 ### Fixed
 tba
 
 
-## [MARLIN-E3S1FORK-BYTT-3] - 2023-04-03
+## [MARLIN-E3S1PROFORK-BYTT-3] - 2023-04-03
 
 This is a sneak preview of the comming updates. I will edit this file frequently..
  
 ### Added
-- [MARLIN-E3S1FORK-BYTT-add3] Some non relevant Marlin commits were included.
+- [MARLIN-E3S1PROFORK-BYTT-add3] Some non relevant Marlin commits were included.
 
 ### Changed
-- [MARLIN-E3S1FORK-BYTT-change3] The S1 non Pro/Plus version has been rebased on the actual Marlin bufix-2.1.x as there is no toch class needed and it is easier to maintain a recent marlin for the DWIN_CREALITY_LCD. Laser support vanished out of this version for now. Maybe i will include it sometime.
+- [MARLIN-E3S1PROFORK-BYTT-change3] The S1 non Pro/Plus version has been rebased on the actual Marlin bufix-2.1.x as there is no toch class needed and it is easier to maintain a recent marlin for the DWIN_CREALITY_LCD. Laser support vanished out of this version for now. Maybe i will include it sometime.
 
 ### Fixed
-- [MARLIN-E3S1FORK-BYTT-fix4] M600, pause and filament runout for the Ender 3 S1 nonProPlus with the encoder display. 
+- [MARLIN-E3S1PROFORK-BYTT-fix4] M600, pause and filament runout for the Ender 3 S1 nonProPlus with the encoder display. 
 
 
 
-## [MARLIN-E3S1FORK-BYTT-2] - 2023-04-02
+## [MARLIN-E3S1PROFORK-BYTT-2] - 2023-04-02
 
 The following adds/changes/fixes delivered with this release.
  
 ### Added
-- [MARLIN-E3S1FORK-BYTT-add2] minor important marlin commits were added
+- [MARLIN-E3S1PROFORK-BYTT-add2] minor important marlin commits were added
 
 ### Changed
-- [MARLIN-E3S1FORK-BYTT-change2] I changed the behavior of the "print" button for the folders and subfolders. Now the print button enters the sd card on first click, and when you are in a folder or subfolder you can go one folder up with the "print" button. Real navigation.
+- [MARLIN-E3S1PROFORK-BYTT-change2] I changed the behavior of the "print" button for the folders and subfolders. Now the print button enters the sd card on first click, and when you are in a folder or subfolder you can go one folder up with the "print" button. Real navigation.
 
 ### Fixed
-- [MARLIN-E3S1FORK-BYTT-fix3] ubl7x7 finished percentage does not match and is stuck at 98%. With this release this visual bug is fixed.
+- [MARLIN-E3S1PROFORK-BYTT-fix3] ubl7x7 finished percentage does not match and is stuck at 98%. With this release this visual bug is fixed.
 
 
 
-## [MARLIN-E3S1FORK-BYTT-1] - 2023-03-31
+## [MARLIN-E3S1PROFORK-BYTT-1] - 2023-03-31
  
 This release is called "M600 fix"
 
@@ -81,10 +87,10 @@ Reverting this commit fixed it for one of them.
 The second has yet to respond. As i could reproduce this i will push the revert as we did not have this problem before.
  
 ### Added
-- [MARLIN-E3S1FORK-BYTT-add1] Changelog added
+- [MARLIN-E3S1PROFORK-BYTT-add1] Changelog added
 
 ### Changed
-- [MARLIN-E3S1FORK-BYTT-change1] Buffers reduced as they are not needed so high and sometimes lower buffers (faster reaction of the printer) are better.
+- [MARLIN-E3S1PROFORK-BYTT-change1] Buffers reduced as they are not needed so high and sometimes lower buffers (faster reaction of the printer) are better.
 
 before:
 
@@ -105,5 +111,132 @@ now:
 
 
 ### Fixed
-- [MARLIN-E3S1FORK-BYTT-fix1] Reverted Linear Advance Marlin commit https://github.com/MarlinFirmware/Marlin/commit/ca77850cbb8ed57d4cdcf29a12a278d6bfa5c0d5
-- [MARLIN-E3S1FORK-BYTT-fix2] M600 filament runout fixed. You can now use M600 in your gcode.
+- [MARLIN-E3S1PROFORK-BYTT-fix1] Reverted Linear Advance Marlin commit https://github.com/MarlinFirmware/Marlin/commit/ca77850cbb8ed57d4cdcf29a12a278d6bfa5c0d5
+- [MARLIN-E3S1PROFORK-BYTT-fix2] M600 filament runout fixed. You can now use M600 in your gcode.
+
+-------------------------------------------------------------------------------------------------------------------
+Old changelog for historical purposes:
+
+
+Update 30.03.2023 01:06 CET:
+
+Today i released a new major update of my fork.
+
+"folders and subfolders" support has been added to the firmware.
+
+You can now open folders and subfolders and load files out of these.
+
+There are some minor optimizations to do but overall it works.
+
+You can open folder with 8 chars or less, more chars folders wont be opened!
+
+Enjoy!
+
+-------------------------------------------------------------------------------------------------------------------
+Update 13.03.2023 20:21 CET:
+
+Today i have finalized the laser module integration. Basic workflow works. So it should work if there are no bugs in the code provided by creality.
+Additionally i today scripted my build environment to be able to faster build the maintained versions.
+Tomorrow i will backport new upstream code fixes into my fork and release new binarys with laser functionality enabled.
+Also i will release UBL builds with 5x5, 7x7, 10x10 meeshes.
+Many testers gave feedback so i could make this firmware as good as possible.
+With the next release the nameing cheme will change:
+Like firmware-XXXXXX-YYYY-E3S1Pro-abl5x5-LA-F1.bin or firmware-XXXXXXX-YYYY-E3S1Plus-ubl10x10-LA-F4.bin 
+
+XXXXXX will represent the build day.
+
+YYYYYY will represent the build time.
+
+abl5x5 bilinear bed leveling with 5x5 square mesh
+
+ubl5x5 ubl with 5x5 mesh
+
+ubl7x7 ubl with 7x7 mesh
+
+ubl10x10 ubl with 10x10 mesh
+
+All versions will support laser functionality!
+
+-------------------------------------------------------------------------------------------------------------------
+Update 08.03.2023 14:02 CET:
+
+Today i released new builds with some fixes for Linear Advance.
+Additionally i added a build for the Ender 3 S1 non Pro with the knob encoder display.
+I also uploaded the needed files for the DWIN display and instructions what to do.
+-------------------------------------------------------------------------------------------------------------------
+Update 27.02.2023 16:40 CET:
+
+Thanks to the testers we have found another bug while sd printing in upstream sources.
+So i fixed today:
+- fixed filament runount sensor resume not functional
+- fixed sd print pause resume not functional
+
+New binarys have been released.
+
+And a good day for Ender 3 S1 Plus users: Also thanks to the testers i am now able to support Ender 3 S1 Plus with 310x315 heatbed.
+Just pushed first Release for it!
+
+Happy printing and filament changeing!
+------------------------------------------------------------------------------------------------------------------
+Update 23.02.2023 19:47 CET:
+
+Todays update is that there is no update needed. lol
+Today i helped some testers, among there was on Ender S1 plus user wanting my firmware to use 300°C.
+No problem.. So i gethered measurements from the printer and sent him a version.
+He was not able to set 300°C.. My directly thought and after code review verified: "hm thats fishy af. haha, it will be the touch screen firmware!".
+We then installed the Ender 3 S1 Pro touch firmware version to break this barrier. double lol.
+
+It works. All other parameters seem also match.
+
+Again one happy person..
+
+I will release a version for the Ender 3 S1 Plus with touch display and the Ender 3 S1 with knob display soon.
+I am just gathering some informations and needed measurements. The firmware base is ready to rock also those machines.
+-------------------------------------------------------------------------------------------------------------------
+Update 21.02.2023 22:11 CET:
+
+Pushed a new update called "performance and quality" update.
+- increased buffers as we have enough ram for better sd card and octoprint performance
+- rebased on upstream fixes and again manually fixed upstream babystepping that is still not functional with 0.01 mm babysteps
+- increased min_segementtime
+- increased feedrates for faster printing with "reasonable" barriers
+-------------------------------------------------------------------------------------------------------------------
+Update 16.02.2023 21:31 CET:
+
+Todays release is mainly a service and quality release.
+I fixed babystepping while printing as it is broken upstream.
+Enjoy :)
+-------------------------------------------------------------------------------------------------------------------
+Update 13.02.2023 0:13 CET:
+
+Today i ported all my config tweaks back and released a version of Marlin 2.0.8 with the Ender 3 S1 Pro upstream implementations.
+Version 2.0.8 supports also the laser!
+I also rebuild my 2.1.2 release and implemented all upstream fixes.
+And by the way: I recalibrated my own printers belts which were way to loose :-)
+Had wobbles today.. But also with the stock firmware.. Belts tightend. Wobbles way better :-)
+Will check deeper tomorrow.
+-------------------------------------------------------------------------------------------------------------------
+Update 10.02.2023 10:59 CET:
+
+Updated binaries have been released. Its just a small Fix:
+The bed is 235x235, standard lcd_rts.cpp, the class managing lcd display only supports integer ex 117. But the bed middle is 235/2=117.5 .
+So i had to hardcode it to respect the .5 decimal.
+Works perfectly. 
+
+Now my firmware is technically complete, besides laser functionality which is not functional in upstream Marlin-2.1.x-pro-s1 source.
+So i will have to wait with this till upstream is functional.
+-------------------------------------------------------------------------------------------------------------------
+Update 08.02.2023 10:42 CET:
+
+It seems there is bug when pushing touch display fast at initial z-offset configuration via touch screen.
+I opened a bug with the builder of this wonderfull peace of software.
+https://github.com/synman/Ender-3-S1-Pro-Firmware/issues/20
+
+Update 09.02.2023 10:11 CET:
+
+The touch screen babystepping fast pushing bug has been adressed and (hopefully) fixed. Updated binaries have been uploaded.
+Feedback welcome.
+
+
+
+