Learn-Vim/ch25_vimscript_conditionals_and_loops.md

Ch25. Vimscript Conditionals And Loops

In this chapter, you will learn about conditionals and loops using the data types you learned in the previous chapter.

Relational Operators

Below are Vim's relational operators:

a == b		equal to
a != b		not equal to
a >  b		greater than
a >= b		greater than or equal to
a <  b		less than
a <= b		less than or equal to

For example:

:echo 5 == 5
:echo 5 != 5
:echo 10 > 5
:echo 10 >= 5
:echo 10 < 5
:echo 5 <= 5

Just like Vim coerces strings into numbers in an arithmetic expression, it also coerces strings into numbers in an equality expression. Here it coerces "5foo" into 5. Since 5 is truthy, the expression below returns true (check out Ch. 24 to recap on string coercion).

:echo 5 == "5foo"
" returns true

Also recall that if you start a string with a non-numerical character like "foo5", then the string is converted into number 0 (0 is falsy in Vim).

echo 5 == "foo5"
" returns false

String Logic Operators

Vim has more relational operators for comparing strings:

a =~ b
a !~ b

For examples:

let str = "hearty breakfast"

echo str =~ "hearty"
" returns true

echo str =~ "dinner"
" returns false

echo str !~ "dinner"
" returns true

The =~ operator performs a regex match against the given string. In the example above, str =~ "hearty" returns true because str contains the "hearty" pattern. You can always use == and !=, but using them will compare the expression against the entire string. =~ and !~ are more flexible choices.

echo str == "hearty"
" returns false

echo str == "hearty breakfast"
" returns true

Let's try this one. Note the uppercase "H":

echo str =~ "Hearty"
" true

It returns true even though "Hearty" is capitalized. Interesting... It turns out that my Vim setting is set to ignore case (set ignorecase), so when Vim checks for equality, it uses my Vim setting and ignores the case. If I were to turn off ignore case (set noignorecase), the comparison now returns false.

set noignorecase
echo str =~ "Hearty"
" returns false because case matters

set ignorecase
echo str =~ "Hearty"
" returns true because case doesn't matter

If you are writing a plugin for others, this is a tricky situation. Does the user have ignorecase or noignorecase setting? You definitely do not want to force your users to mutate their case ignore option. So what do you do?

Luckily, Vim has an operator that can always ignore or match case. To always match case, add a # at the end.

set ignorecase
echo str =~# "hearty"
" returns true

echo str =~# "HearTY"
" returns false

set noignorecase
echo str =~# "hearty"
" true

echo str =~# "HearTY"
" false

echo str !~# "HearTY"
" true

To always ignore case when comparing, append it with ?:

set ignorecase
echo str =~? "hearty"
" true

echo str =~? "HearTY"
" true

set noignorecase
echo str =~? "hearty"
" true

echo str =~? "HearTY"
" true

echo str !~? "HearTY"
" false

I prefer to use # to always match the case and be on the safe side.

if

Now that you have seen Vim's equality expressions, let's touch the fundamental conditional operator, the if statement.

At minimum, the syntax is:

if {clause}
  {some expression}
endif

You can extend the case analysis with elseif and else.

if {predicate1}
  {expression1}
elseif {predicate2}
  {expression2}
elseif {predicate3}
  {expression3}
else
  {expression4}
endif

For example, the plugin Vim-signify uses a different installation method depending on your Vim settings. Below is the installation instruction from their readme, using the if statement:

if has('nvim') || has('patch-8.0.902')
  Plug 'mhinz/vim-signify'
else
  Plug 'mhinz/vim-signify', { 'branch': 'legacy' }
endif

Ternary Expression

Vim has a ternary expression for a one-liner case analysis:

{predicate} ? expressiontrue : expressionfalse

For example:

echo 1 ? "I am true" : "I am false"

Since 1 is truthy, Vim echoes "I am true". Suppose you want to conditionally set the background to dark if you are using Vim past a certain hour. Add this to vimrc:

let &background = strftime("%H") < 18 ? "light" : "dark"

&background is the 'background' option in Vim. strftime("%H") returns the current time in hours. If it is not yet 6 PM, use a light background. Otherwise, use a dark background.

Or

The logical "or" (||) works like many programming languages.

{Falsy expression}  || {Falsy expression}   false
{Falsy expression}  || {Truthy expression}  true
{Truthy expression} || {Falsy expression}   true
{Truthy expression} || {Truthy expression}  true

Vim evaluates the expression and return either 1 (truthy) or 0 (falsy).

echo 5 || 0
" returns 1

echo 5 || 5
" returns 1

echo 0 || 0
" returns 0

echo "foo5" || "foo5"
" returns 0

echo "5foo || foo5"
" returns 1

If the current expression evaluates to truthy, the subsequent expression won't be evaluated.

let one_dozen = 12

echo one_dozen || two_dozen
" returns 1

echo two_dozen || one_dozen
" returns error

Note that two_dozen is never defined. The expression one_dozen || two_dozen doesn't throw any error because one_dozen is evaluated first found to be truthy, so Vim doesn't evaluate two_dozen.

And

The logical "and" (&&) is the complement of the logical or.

{Falsy Expression}  && {Falsy Expression}   false
{Falsy expression}  && {Truthy expression}  false
{Truthy Expression} && {Falsy Expression}   false
{Truthy expression} && {Truthy expression}  true

For example:

echo 0 && 0
" returns 0

echo 0 && 10
" returns 0

Unlike "or", "and" will evaluate the subsequent expression after it reaches the first falsy expression. It will continue to evaluate the subsequent truthy expressions until the end (or until the first falsy expression).

let one_dozen = 12
echo one_dozen && 10
" returns 1

echo one_dozen && v:false
" returns 0

echo one_dozen && two_dozen
" returns error

echo exists("one_dozen") && one_dozen == 12
" returns 1

for

The for loop is commonly used with the list data type.

let breakfasts = ["pancakes", "waffles", "eggs"]

for breakfast in breakfasts
  echo breakfast
endfor

It works with nested list:

let meals = [["breakfast", "pancakes"], ["lunch", "fish"], ["dinner", "pasta"]]

for [meal_type, food] in meals
  echo "I am having " . food . " for " . meal_type
endfor

You can technically use the for loop with a dictionary using the keys() method.

let beverages = #{breakfast: "milk", lunch: "orange juice", dinner: "water"}
for beverage_type in keys(beverages)
  echo "I am drinking " . beverages[beverage_type] . " for " . beverage_type
endfor

while

Another common loop is the while loop.

let counter = 1
while counter < 5
  echo "Counter is: " . counter
  let counter += 1
endwhile

To get the content of the current line to the last line:

let current_line = line(".")
let last_line = line("$")

while current_line <= last_line
  echo getline(current_line)
  let current_line += 1
endwhile

Error Handling

Often your program doesn't run the way you expect it to. As a result, it throws you for a loop (pun intended). What you need is a proper error handling.

break

When you use break inside a while or for loop, it stops the loop.

To get the texts from the start of the file to the current line, but stop when you see the word "donut":

let line = 0
let last_line = line("$")
let total_word = ""

while line <= last_line
  let line += 1
  let line_text = getline(line)
  if line_text =~# "donut"
    break
  endif
  echo line_text
  let total_word .= line_text . " "
endwhile

echo total_word

If you have the text:

one
two
three
donut
four
five

Running the above while loop gives "one two three" and not the rest of the text because the loop breaks once it matches "donut".

continue

The continue method is similar to break, where it is invoked during a loop. The difference is that instead of breaking out of the loop, it just skips that current iteration.

Suppose you have the same text but instead of break, you use continue:

let line = 0
let last_line = line("$")
let total_word = ""

while line <= last_line
  let line += 1
  let line_text = getline(line)
  if line_text =~# "donut"
    continue
  endif
  echo line_text
  let total_word .= line_text . " "
endwhile

echo total_word

This time it returns one two three four five. It skips the line with the word "donut", but the loop continues.

try, finally, and catch

Vim has a try, finally, and catch to handle errors. To simulate an error, you can use the throw command.

try
  echo "Try"
  throw "Nope"
endtry

Run this. Vim will complain with "Exception not caught: Nope error.

Now add a catch block:

try
  echo "Try"
  throw "Nope"
catch
  echo "Caught it"
endtry

Now there is no longer any error. You should see "Try" and "Caught it" displayed.

Let's remove the catch and add a finally:

try
  echo "Try"
  throw "Nope"
  echo "You won't see me"
finally
  echo "Finally"
endtry

Run this. Now Vim displays the error and "Finally".

Let's put all of them together:

try
  echo "Try"
  throw "Nope"
catch
  echo "Caught it"
finally
  echo "Finally"
endtry

This time Vim displays both "Caught it" and "Finally". No error is displayed because Vim caught it.

Errors come from different places. Another source of error is calling a nonexistent function, like Nope() below:

try
  echo "Try"
  call Nope()
catch
  echo "Caught it"
finally
  echo "Finally"
endtry

The difference between catch and finally is that finally is always run, error or not, where a catch is only run when your code gets an error.

You can catch specific error with :catch. According to :h :catch:

:catch /^Vim:Interrupt$/	            " catch interrupts (CTRL-C)
:catch /^Vim\\%((\\a\\+)\\)\\=:E/	    " catch all Vim errors
:catch /^Vim\\%((\\a\\+)\\)\\=:/	    " catch errors and interrupts
:catch /^Vim(write):/		              " catch all errors in :write
:catch /^Vim\\%((\\a\\+)\\)\\=:E123:/ " catch error E123
:catch /my-exception/		              " catch user exception
:catch /.*/			                      " catch everything
:catch				                        " same as /.*/

If you notice from the list above, there is a catch for interrupt. Inside a try block, an interrupt is considered a catchable error.

try
  catch /^Vim:Interrupt$/
  sleep 100
endtry

In your vimrc, if you use a custom colorscheme, like gruvbox, and you accidentally delete the colorscheme directory but still have the line colorscheme gruvbox in your vimrc, Vim will throw an error when you source it. To fix this, I added this in my vimrc:

try
  colorscheme gruvbox
catch
  colorscheme default
endtry

Now if you source vimrc without gruvbox directory, Vim will use the colorscheme default.

Learn conditionals the smart way

In the previous chapter, you learned about Vim basic data types. In this chapter, you learned how to combine them to write basic programs using conditionals and loops. These are the building blocks of programming.

Next, let's learn about variable scopes.