mirror of
https://github.com/timmbogner/Farm-Data-Relay-System
synced 2024-11-10 07:10:42 +00:00
76 lines
2.5 KiB
C
76 lines
2.5 KiB
C
// FARM DATA RELAY SYSTEM
|
|
//
|
|
// GATEWAY CONFIGURATION
|
|
|
|
//Addresses
|
|
#define UNIT_MAC 0x01 // The address of this gateway
|
|
|
|
#define ESPNOW_NEIGHBOR_1 0x00 // Address of ESP-NOW neighbor #1
|
|
#define ESPNOW_NEIGHBOR_2 0x02 // Address of ESP-NOW neighbor #2
|
|
#define LORA_NEIGHBOR_1 0x00 // Address of LoRa neighbor #1
|
|
#define LORA_NEIGHBOR_2 0x03 // Address of LoRa neighbor #2
|
|
|
|
// Interfaces
|
|
#define USE_ESPNOW
|
|
//#define USE_LORA
|
|
//#define USE_WIFI // Will cause errors if used with ESP-NOW. Use a serial link instead!
|
|
//#define USE_ETHERNET
|
|
|
|
// Actions
|
|
// Options: sendESPNowNbr(1 or 2); sendESPNowPeers(); sendLoRaNbr(1 or 2); broadcastLoRa(); sendSerial(); sendMQTT();
|
|
#define ESPNOWG_ACT sendSerial();
|
|
#define LORAG_ACT sendSerial();
|
|
#define SERIAL_ACT sendESPNowNbr(2); sendESPNowPeers(); sendLoRaNbr(2); broadcastLoRa();
|
|
#define MQTT_ACT
|
|
#define INTERNAL_ACT sendSerial();
|
|
#define ESPNOW1_ACT
|
|
#define ESPNOW2_ACT sendSerial();
|
|
#define LORA1_ACT
|
|
#define LORA2_ACT sendSerial();
|
|
|
|
// LoRa Configuration
|
|
#define RADIOLIB_MODULE SX1276
|
|
#define LORA_SS 18
|
|
#define LORA_RST 14
|
|
#define LORA_DIO 26
|
|
#define LORA_TXPWR 17 // LoRa TX power in dBm (: +2dBm - +17dBm (for SX1276-7) +20dBm (for SX1278))
|
|
//#define USE_SX126X
|
|
|
|
//#define CUSTOM_SPI
|
|
#define LORA_SPI_SCK 5
|
|
#define LORA_SPI_MISO 19
|
|
#define LORA_SPI_MOSI 27
|
|
|
|
#define FDRS_DEBUG // Enable USB-Serial debugging
|
|
|
|
// OLED -- Displays console debugging messages on an SSD1306 I²C OLED
|
|
///#define USE_OLED
|
|
#define OLED_HEADER "FDRS"
|
|
#define OLED_SDA 4
|
|
#define OLED_SCL 15
|
|
#define OLED_RST 16
|
|
|
|
// UART data interface pins (if available)
|
|
#define RXD2 14
|
|
#define TXD2 15
|
|
|
|
//#define USE_LR // Use ESP-NOW LR mode (ESP32 only)
|
|
|
|
// WiFi and MQTT Credentials -- These will override the global settings
|
|
//#define WIFI_SSID "Your SSID"
|
|
//#define WIFI_PASS "Your Password"
|
|
|
|
//#define MQTT_ADDR "192.168.0.8"
|
|
//#define MQTT_PORT 1883 // Default MQTT port is 1883
|
|
//#define MQTT_AUTH //Enable MQTT authentication
|
|
//#define MQTT_USER "Your MQTT Username"
|
|
//#define MQTT_PASS "Your MQTT Password"
|
|
|
|
// Logging settings -- Logging will occur when MQTT is disconnected
|
|
//#define USE_SD_LOG //Enable SD-card logging
|
|
//#define USE_FS_LOG //Enable filesystem (flash) logging
|
|
#define LOGBUF_DELAY 10000 // Log Buffer Delay - in milliseconds
|
|
#define SD_SS 0 //SD card CS pin (Use different pins for LoRa and SD)
|
|
#define LOG_FILENAME "fdrs_log.csv"
|
|
|