5340965c3a
input via Serial0
...
data at the Rx of the USB Serial port (normally used for debugging) will now be entered into the getSerial() function
2 years ago
4721e72b47
changed peers to neighbors
...
Better reflects the concept and clears ambiguity
2 years ago
6212c58648
move ack settings
...
hid LoRa settings
2 years ago
ccf24f50f9
added delay(0)
2 years ago
754fb9ce56
ESP-NOW confirmation
2 years ago
236afd04e9
Update Irrigation.ino
...
Co-Authored-By: Kisssys <5122480+Kisssys@users.noreply.github.com>
2 years ago
bcda928a4a
added gypsum soil sensor
...
Co-Authored-By: Kisssys <5122480+Kisssys@users.noreply.github.com>
2 years ago
06aa620c6a
4-channel Relay Controller
2 years ago
40f415f405
Merge pull request #98 from timmbogner/two-way-comms
...
Two-way communications - take 2
2 years ago
537f14dc03
added support for TSL2561
2 years ago
a58cab5774
removed fdrs_sensor.h etc
2 years ago
65d31644c8
Merge branch 'dev' into two-way-comms
2 years ago
1501817975
subscription list and unified callback
...
the functionality is almost complete
2 years ago
4c0b934b5a
Update fdrs_gateway_config.h
2 years ago
408779bbd4
Update 1_UART_Gateway.ino
2 years ago
b3e177a945
fixed gateway
2 years ago
d1491c686c
i guess that fixes it
2 years ago
e89ac94427
cosmetic
2 years ago
9f74426f0b
added new abilities
2 years ago
32b6a4cdab
Added missing parameter checks to fdrs_checkConfig
...
Added test for logging functions as well as LoRa ACK.
Added the define to all numbered example sketches.
2 years ago
4ce0a617af
Clean-up of fdrs_checkConfig.h
...
Removed redundancies from fdrs_checkConfig.h
Also - as an example - added the inclusion of the node config check in 0_MQTT_Gateway
2 years ago
deabf20a3d
readme and sensor examples
...
moved readmes, added back sensor examples
2 years ago
b8675edb02
replace old examples
2 years ago
1f4021dda4
decouple READING_ID from LoRa address
2 years ago
fb9be94242
disabled local lora configuration in sensor and gateway files
...
By default the local lora configuration must be disabled. This is less error-prone as values from the fdrs_globals.h file are used by default.
2 years ago
91bcf22361
Merge pull request #83 from aviateur17/dev_loratxpow
...
Add ability to adjust LoRa transmit power #66
2 years ago
4457bede78
Added ability to adjust LoRa transmit power #66
2 years ago
def150b49c
Use READING_ID as part of LoRa address. #65
2 years ago
e26d44ff44
Merge branch 'dev' of https://github.com/aviateur17/Farm-Data-Relay-System into dev
2 years ago
eed87ac84c
Validate CRC when sensor does not want ACK - improvement #54
2 years ago
90ac7148fe
Merge branch 'dev' into dev
2 years ago
f3d840f944
Disable ACK by default for sensors #54
2 years ago
269fd335c2
Add LoRa ACK & CRC functionality for sensors #54
2 years ago
0bf0015576
Add LoRa ACK & CRC functionality for gateway #54
2 years ago
62c247275a
Applied changes to FDRS_Sensor and FDRS_Gateway folders
2 years ago
ae85886e65
added #define USE_ESPNOW to gateway code
...
Including sections which are ESPNOW specific only if #define USE_ESPNOW is enabled.
2 years ago
5e85269373
Clean up of #72
...
- moved configuration checkup to external file to make sensor and gateway files smaller.
- for sensors the config now only is shown if the sensor does NOT return from Deep Sleep. For example when pressing the reset button or after a crash.
- for gateways the configuration is shown once and also can be forced to be shown with a reset. Code should work for ESP32 and ESP8266 - have only tested it with ESP32.
- fixed issue in fdrs_functions.h - if MQTT_AUTH was enabled but WIFI disabled, the compile crashed.
2 years ago
5027623cb8
Fixing configuration system - part 2: gateways
...
Further work on #71 :
- Added config code to fdrs_functions.h.
- Commented all local config settings -> global config settings will be taken by default.
- added a debugConfig function, to check from where settings have been taken. May be moved to a place where sensors and gateways can share code as this is needed only once. For the sake of simplicity the function made it into fdrs_sensor.h and fdrs_functions.h Needs to be refined, as there is redundancy right now.
2 years ago
cfa57e388b
Fixing configuration system - part 1: sensors
...
Fixed the configuration system for sensor nodes. Gateway nodes are still to be fixed (work still in process :) )
This has been addressed in #71
Important: For this system to work and make the onboarding easier for new users, global settings must be used by default and therefore local settings must be commented out by default.
2 years ago
b73b7a4b1c
Added LoRa Debug info for BAND and SF to all nodes for better debugging
...
As there is still a lot of redundancy in the project, in a first step I added the debug messages in each of the places.
2 years ago
7526439d85
Return random vaule for sensor nodes
...
the return value in the sensor sketches was missing the random function. Fixed that.
2 years ago
699d7a2840
shwoop
2 years ago
1ce8a3eb2b
dink
...
Changed the spammer a little and adjusted some other stuff.
2 years ago
6a5e7acd13
sensors are go
2 years ago
d3e137ab8b
unifying gateways etc
...
more to come
2 years ago
087b9f30c8
house keeping
...
Added some comments for easier browsing through the source and corrected a type.
2 years ago
dbf6d5b082
Removed double-include of fdrs_gateway_config.h
...
fdrs_gateway_config. h was included twice. I also simplified th USE_LED configuration block (was defined twice, could be done in one block.
2 years ago
3878c27725
Fixed #59
...
Fixed #59 with the help of aviateur17. Explanation here: https://github.com/timmbogner/Farm-Data-Relay-System/issues/59#issuecomment-1183915731
2 years ago
54b21e9a3b
Fixed unallowed extra tokens after #endif
...
Extra tokens at end of #endif directive are not allowed. Arudino IDE does not care but Platform IO does. The specification forbids is as well, so adding a comment behind the endif is a good compromise between overview and conformity.
2 years ago
c6b16143a9
Replaced undefined sleep_time with seconds
2 years ago
Timm Bogner
Sascha
Jeff Lehman