added defaults

FDRS_Gateway2000/defaults.h

@@ -0,0 +1,36 @@
+#define UNIT_MAC     0xFF  // THIS UNIT
+#define ESPNOW1_MAC  0xFF  // ESPNOW1 Address 
+#define ESPNOW2_MAC  0xFF  // ESPNOW2 Address
+
+#define ESPNOW1_DELAY  0
+#define ESPNOW2_DELAY  0
+#define ESPNOWG_DELAY  0
+#define SERIAL_DELAY   0
+#define MQTT_DELAY     0
+#define LORA_DELAY     0
+
+#define ESPNOW1_ACT    sendSerial();
+#define ESPNOW2_ACT    sendSerial();
+#define ESPNOWG_ACT    sendSerial();
+#define SERIAL_ACT     sendESPNOW(0);
+#define MQTT_ACT       sendSerial();
+#define LORA_ACT       sendSerial();
+
+#define RXD2 21
+#define TXD2 22
+
+#define WIFI_NET "Your SSID"
+#define WIFI_PASS "Password"
+#define MQTT_ADDR "192.168.0.8"
+
+//#define USE_LORA      
+#define SCK 5
+#define MISO 19
+#define MOSI 27
+#define SS 18
+#define RST 14
+#define DIO0 26
+//433E6 for Asia
+//866E6 for Europe
+//915E6 for North America
+#define BAND 915E6

FDRS_Gateway2000/fdrs_config.h

@@ -2,19 +2,13 @@
 //
 //  GATEWAY 2.000 Configuration
 
+#include "defaults.h"
 #define UNIT_MAC     0x00  // THIS UNIT
-#define ESPNOW1_MAC  0x01  // ESPNOW1 Address 
-#define ESPNOW2_MAC  0x01  // ESPNOW2 Address
 
 //Actions -- Define what happens when a packet arrives at each interface:
 //Current function options are: sendESPNOW(interface),  sendSerial(), sendMQTT(), and sendLoRa().
 
-#define ESPNOW1_ACT    sendSerial();
-#define ESPNOW2_ACT    sendSerial();
 #define ESPNOWG_ACT    sendSerial();
-#define SERIAL_ACT     sendESPNOW(0);
-#define MQTT_ACT       sendSerial();
-#define LORA_ACT       sendSerial();
 
 //ESP32 Only
 #define RXD2 21
@@ -48,26 +42,19 @@
 //#define ESPNOW1_ACT    sendSerial();
 //#define ESPNOW2_ACT    sendSerial();
 //#define ESPNOWG_ACT    sendSerial();
-//#define SERIAL_ACT     sendESPNOW(0);
+//#define SERIAL_ACT     sendESPNOW(0);      //sendESPNOW() routine will soon change
-//#define MQTT_ACT       sendSerial();
+//#define MQTT_ACT       
 //#define LORA_ACT       sendSerial();
 
 //Use these settings for a gateway that recieves serial (UART) data and sends MQTT.
 //#define USE_WIFI
-//#define ESPNOW1_ACT  
-//#define ESPNOW2_ACT  
-//#define ESPNOWG_ACT  
 //#define SERIAL_ACT   sendMQTT();
-//#define MQTT_ACT     sendSerial();
-//#define LORA_ACT     sendSerial();
 
 //Use these settings for a basic repeater addressed to the final gateway.  
 //#define UNIT_MAC     0x01  // THIS UNIT
 //#define ESPNOW1_MAC  0x00  // ESPNOW1 Address 
 //#define ESPNOW2_MAC  0x02  // ESPNOW2 Address
 //#define ESPNOW1_ACT  sendESPNOW(2);
-//#define ESPNOW2_ACT  sendESPNOW(1);
+//#define ESPNOW2_ACT  sendESPNOW(1);         //sendESPNOW() routine will soon change
 //#define ESPNOWG_ACT  sendESPNOW(1);
-//#define SERIAL_ACT   
+   
-//#define MQTT_ACT     
-//#define LORA_ACT