translation macros

Examples/Universal_Gateway/Universal_Gateway.ino

@@ -7,31 +7,12 @@
 
 #include "fdrs_config.h"
 
-
-
-#ifdef ESP8266
-#include <ESP8266WiFi.h>
-#include <espnow.h>
-#elif defined(ESP32)
-#include <esp_now.h>
-#include <WiFi.h>
-#include <esp_wifi.h>
-#endif
-#include <ArduinoJson.h>
-#ifdef USE_WIFI
-#include <PubSubClient.h>
-#endif
-#ifdef USE_LORA
-#include <LoRa.h>
-#endif
 #ifdef USE_LED
 #include <FastLED.h>
 #endif
 #include "fdrs_gateway.h"
 #include "fdrs_config.h"
 
-#define USE_WIFI
-
 #ifdef USE_LED
 CRGB leds[NUM_LEDS];
 #endif
@@ -39,19 +20,21 @@ CRGB leds[NUM_LEDS];
 
 uint8_t selfAddress[6] =   {MAC_PREFIX, UNIT_MAC};
 
+#if defined(ESP_GET) || defined(ESP_SEND)
 
 #ifdef ESPNOW_PEER_1
 uint8_t ESPNOW1[] =       {MAC_PREFIX, ESPNOW_PEER_1};
-#else
-uint8_t ESPNOW1[] =       {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 #endif
+
 #ifdef ESPNOW_PEER_2
 uint8_t ESPNOW2[] =       {MAC_PREFIX, ESPNOW_PEER_2};
-#else
+#endif
-uint8_t ESPNOW2[] =       {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
 #endif
 
 
+#if defined(LORA_GET) || defined(LORA_SEND)
+
 #ifdef LORA_PEER_1
 uint8_t LoRa1[6] =         {MAC_PREFIX, LORA_PEER_1};
 #endif
@@ -60,10 +43,20 @@ uint8_t LoRa1[6] =         {MAC_PREFIX, LORA_PEER_1};
 uint8_t LoRa2[6] =         {MAC_PREFIX, LORA_PEER_2};
 #endif
 
+#endif
+
+
+#if defined(MQTT_GET) || defined(MQTT_SEND)
 
 MQTT_FDRSGateWay MQTT(WIFI_SSID,WIFI_PASS,MQTT_ADDR,MQTT_PORT);
 
+#endif
+
+#if defined(ESP_GET) || defined(ESP_SEND)
 ESP_FDRSGateWay ESPNow;
+#endif
+
+#if defined(SER_GET) || defined(SER_SEND)
 
 #if defined(ESP32)
 Serial_FDRSGateWay SerialGW(&Serial1,115200);
@@ -71,8 +64,15 @@ Serial_FDRSGateWay SerialGW(&Serial1,115200);
 Serial_FDRSGateWay SerialGW(&Serial,115200);
 #endif
 
+#endif
+
+#if defined(LORA_GET) || defined(LORA_SEND)
+
 LoRa_FDRSGateWay LoRaGW(MISO,MOSI,SCK,SS,RST,DIO0,BAND,SF);
 
+#endif
+
+
 void setup() {
 
 #ifdef USE_LED
@@ -81,8 +81,11 @@ void setup() {
   FastLED.show();
 #endif
 
+#if defined(MQTT_GET) || defined(MQTT_SEND)
   MQTT.init();
+#endif
 
+#if defined(ESP_GET) || defined(ESP_SEND)
   ESPNow.init(selfAddress);
 
 #ifdef ESPNOW_PEER_1
@@ -93,41 +96,67 @@ void setup() {
   ESPNow.add_peer(ESPNOW2);
 #endif
 
+#endif
+
+
+#if defined(SER_GET) || defined(SER_SEND)
+
 #if defined(ESP32)
   SerialGW.init(SERIAL_8N1,RXD2,TXD2);
 #else
   SerialGW.init();
 #endif
 
-#ifdef USE_LORA
-  LoRaGW.init(selfAddress);
-#endif
-
-#ifdef ESPNOW_PEER_1
-  ESPNow.add_peer(ESPNOW1);
 #endif
 
-#ifdef ESPNOW_PEER_2
+#if defined(LORA_GET) || defined(LORA_SEND)
-  ESPNow.add_peer(ESPNOW2);
+  LoRaGW.init(selfAddress);
 #endif
 
 }
 
 void loop() {
 
+#if defined(LORA_GET)
   LoRaGW.get();
+#endif
+
+#if defined(SER_GET)
   SerialGW.get();
+#endif
 
+#if defined(ESP_SEND)
   ESPNow.release();
+#endif
+
+#if defined(MQTT_SEND)
   MQTT.release();
+#endif
+
+#if defined(SER_SEND)
   SerialGW.release();
+#endif
+
+#if defined(LORA_SEND)
   LoRaGW.release();
+#endif
 
 //It does not matter witch one you call.
 //it will clear all the data that has been received.
+#if defined(ESP_SEND)
   ESPNow.flush();
+#endif
+
+#if defined(MQTT_SEND)
   MQTT.flush();
+#endif
+
+#if defined(SER_SEND)
   SerialGW.flush();
+#endif
+
+#if defined(LORA_SEND)
   LoRaGW.flush();
+#endif
 
 }

Examples/Universal_Gateway/fdrs_config.h

@@ -9,12 +9,17 @@
 
 #define UNIT_MAC     0x03  // The address of this gateway
 
-//Actions -- Define what happens when a packet arrives at each interface:
+//Where we get the data from
-//Current function options are: sendESPNOW(MAC), sendSerial(), sendMQTT(), bufferESPNOW(interface), bufferSerial(), and bufferLoRa(interface).
+#define LORA_GET
-
+#define MQTT_GET
-#define SERIAL_ACT         
+#define ESP_GET
-#define MQTT_ACT          
+#define SER_GET  
-#define LORAG_ACT      
+
+//Where we send the data to
+#define LORA_SEND
+#define MQTT_SEND
+#define ESP_SEND
+#define SER_SEND 
 
 //#define USE_LORA
 //#define USE_WIFI    //Used only for MQTT gateway
@@ -27,12 +32,6 @@
 #define ESPNOW_PEER_1  0x0C  // ESPNOW1 Address 
 #define ESPNOW_PEER_2  0x0D  // ESPNOW2 Address
 
-// Peer Actions
-#define ESPNOW1_ACT    
-#define ESPNOW2_ACT                    
-#define LORA1_ACT 
-#define LORA2_ACT 
-
 //WiFi and MQTT Credentials -- Needed only for MQTT gateway
 #define WIFI_SSID   "Your SSID"  
 #define WIFI_PASS   "Your Password"